108 resultados para PP SEBS BLENDS


Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study explored the experiences of informal carers who were aged 65 years and over. It has been estimated that 15 per cent of those aged 65 or over provide some form of informal care in England. Despite a growing literature on the involvement of older people in research, there is a paucity of literature on the involvement of older carers. In this study, older carers were identified via a General Practice (GP) register in one urban medical practice. Data was collected through a series of focus groups, which were transcribed and analysed using
thematic analysis. Every carer aged 55 or over and registered with the medical practice was invited to take part in the study. Four female carers and one male carer took part in the study (age range 65-83). Themes that emerged during data analysis included, 1) managing things in an emergency, 2) feeling valued because they took part in the research and 3) the day-to-day reality of living with social exclusion. GP registers provide a valuable tool for identifying older
carers who may otherwise be difficult to engage in research. However, persuading GPs to engage with qualitative research may be a challenge.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The new Food Information Regulation (1169/2011), dictates that in a refined vegetable oil blend, the type of oil must be clearly identified in the package in contract with current practice where is labelled under the generic and often misleading term “vegetable oil”. With increase consumer awareness in food authenticity, as shown in the recent food scandal with horsemeat in beef products, the identification of the origin of species in food products becomes increasingly relevant. Palm oil is used extensively in food manufacturing and as global demand increases, producing countries suffer from the aftermath of intensive agriculture. Even if only a small portion of global production, sustainable palm oil comes in great demand from consumers and industry. It is therefore of interest to detect the presence of palm oil in food products as consumers have the right to know if it is present in the product or not, mainly from an ethical point of view. Apart from palm oil and its derivatives, rapeseed oil and sunflower oil are also included. With DNA-based methods, the gold standard for the detection of food authenticity and species recognition deemed not suitable in this analytical problem, the focus is inevitably drawn to the chromatographic and spectroscopic methods. Both chromatographic (such as GC-FID and LC-MS) and spectroscopic methods (FT-IR, Raman, NIR) are relevant. Previous attempts have not shown promising results due to oils’ natural variation in composition and complex chemical signals but the suggested two-step analytical procedure is a promising approach with very good initial results.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Grinding solid reagents under solvent-free or low-solvent conditions (mechanochemistry) is emerging as a general synthetic technique which is an alternative to conventional solvent-intensive methods. However, it is essential to find ways to scale-up this type of synthesis if its promise of cleaner manufacturing is to be realised. Here, we demonstrate the use of twin screw and single screw extruders for the continuous synthesis of various metal complexes, including Ni(salen), Ni(NCS)(2)(PPh3)(2) as well as the commercially important metal organic frameworks (MOFs) Cu-3(BTC)(2) (HKUST-1), Zn(2-methylimidazolate)(2) (ZIF-8, MAF-4) and Al(fumarate)(OH). Notably, Al(fumarate)(OH) has not previously been synthesised mechanochemically. Quantitative conversions occur to give products at kg h(-1) rates which, after activation, exhibit surface areas and pore volumes equivalent to those of materials produced by conventional solvent-based methods. Some reactions can be performed either under completely solvent-free conditions whereas others require the addition of small amounts of solvent (typically 3-4 mol equivalents). Continuous neat melt phase synthesis is also successfully demonstrated by both twin screw and single screw extrusion for ZIF-8. The latter technique provided ZIF-8 at 4 kg h(-1). The space time yields (STYs) for these methods of up to 144 x 10(3) kg per m(3) per day are orders of magnitude greater than STYs for other methods of making MOFs. Extrusion methods clearly enable scaling of mechanochemical and melt phase synthesis under solvent-free or low-solvent conditions, and may also be applied in synthesis more generally.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Two ionic liquids, 1-ethylpyridinium docusate (IL1) and tri-n-butyl(2-hydroxyethyl)phosphonium docusate (IL2), were designed and synthesized with the explicit intention of imparting a combination of plasticization and antimicrobial efficacy when incorporated into medical grade poly(vinyl chloride)s (PVCs). The glass transition (T-g) of PVC can be reduced by >20 degrees C on addition of 15 wt% IL2. Both IL1 and IL2 leached to varying extents from the base PVC resins rendering the surface of the PVCs hydrophilic. The antimicrobial activity of both ILs is related to the presence and concentration of both cationic and anionic component of the ILs leached from the PVC and inversely proportional to the extent of PVC gelation. Blends of the PVCs with IL1 displayed antibacterial activity against almost all Gram-positive bacteria tested, including coagulase-negative Staphylococci (CoNS) and methicillin-resistant Staphylococcus aureus (MRSA), but not with IL2 at low concentration in contrast to our previous study when high concentrations of IL2 were used. The more hydrophilic IL1 when added to PVC retards biofilm formation.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

High spectral resolution (~80 000) and signal-to-noise observations from the Ultraviolet and Visual Echelle Spectrograph Paranal Observatory Project (UVES-POP) are used to study the interstellarmolecular lines CN (3874 Å), CH+ (3957, 4232 Å) and CH (3886, 4300 Å) towards 74 O- and B-type stellar sightlines. Additionally, archive data are presented for 140 ELODIE early-type stellar sightlines at R = 42 000, plus 25 FEROS at R = 48 000 and 3 UVES at R > 50 000, mainly in the CH+ (4232 Å) and CH (3886, 4300 Å) transitions. Detection rates are ~45 per cent for CN and ~67 per cent for the other lines in the POP sample, and ~10-15 per cent for CH+ and CH lines in the additional sample. CH and CH+ are well correlated between log[N(CH) cm-2]~12-14, implying that these clouds are CH+-like CH and not CN-like CH. CH is also very well correlated with Na I D in the range log[N(Na I cm-2]) ~12.2-14.2. A few sightlines show tentative velocity shifts of ~2 km s-1 between CH and CH+, which appear to be caused by differences in component strength in blends, and hence do not provide firm evidence for shocks. Finally, we describe a search for 13CH+ in a sightline towards HD 76341. No 13CH+ is detected, placing a limit on the 13CH+ to 12CH+ ratio of ~0.01. If a formal fit is attempted, the equivalent width ratio in the two isotopes is a factor ~90 but with large errors. 

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This latest edition of J. S. Bach’s B-minor Mass, by Ulrich Leisinger, described by the publisher as a ‘hybrid edition’, aptly addresses the needs of present-day performers and at the same time fulfils the scholarly expectations of new critical editions to conform to the current study environment

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Shape stabilised phase change materials (SSPCMs) based on a high density poly(ethylene)(hv-HDPE) with high (H-PW, Tm = 56–58 °C) and low (L-PW, Tm = 18–23 °C) melting point paraffin waxes were readily prepared using twin-screw extrusion. The thermo-physical properties of these materials were assessed using a combination of techniques and their suitability for latent heat thermal energy storage (LHTES) assessed. The melt processing temperature (160 °C) of the HDPE used was well below the onset of thermal decomposition of H-PW (220 °C), but above that for L-PW (130 °C), although the decomposition process extended over a range of 120 °C and the residence time of L-PW in the extruder was <30 s. The SSPCMs prepared had latent heats up to 89 J/g and the enthalpy values for H-PW in the respective blends decreased with increasing H-PW loading, as a consequence of co-crystallisation of H-PW and hv-HDPE. Static and dynamic mechanical analysis confirmed both waxes have a plasticisation effect on this HDPE. Irrespective of the mode of deformation (tension, flexural, compression) modulus and stress decreased with increased wax loading in the blend, but the H-PW blends were mechanically superior to those with L-PW.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Photodynamic therapy involves delivery of a photosensitising drug that is activated by light of a specific wavelength, resulting in generation of highly reactive radicals. This activated species can cause destruction of targeted cells. Application of this process for treatment of microbial infections has been termed "photodynamic antimicrobial chemotherapy" (PACT). In the treatment of chronic wounds, the delivery of photosensitising agents is often impeded by the presence of a thick hyperkeratotic/necrotic tissue layer, reducing their therapeutic efficacy. Microneedles (MNs) are an emerging drug delivery technology that have been demonstrated to successfully penetrate the outer layers of the skin, whilst minimising damage to skin barrier function. Delivering photosensitising drugs using this platform has been demonstrated to have several advantages over conventional photodynamic therapy, such as, painless application, reduced erythema, enhanced cosmetic results and improved intradermal delivery. The aim of this study was to physically characterise dissolving MNs loaded with the photosensitising agent, methylene blue and assess their photodynamic antimicrobial activity. Dissolving MNs were fabricated from aqueous blends of Gantrez(®) AN-139 co-polymer containing varying loadings of methylene blue. A height reduction of 29.8% was observed for MNs prepared from blends containing 0.5% w/w methylene blue following application of a total force of 70.56 N/array. A previously validated insertion test was used to assess the effect of drug loading on MN insertion into a wound model. Staphylococcus aureus, Escherichia coli and Candida albicans biofilms were incubated with various methylene blue concentrations within the range delivered by MNs in vitro (0.1-2.5 mg/mL) and either irradiated at 635 nm using a Paterson Lamp or subjected to a dark period. Microbial susceptibility to PACT was determined by assessing the total viable count. Kill rates of >96%, were achieved for S. aureus and >99% for E. coli and C. albicans with the combination of PACT and methylene blue concentrations between 0.1 and 2.5 mg/mL. A reduction in the colony count was also observed when incorporating the photosensitiser without irradiation, this reduction was more notable in S. aureus and E. coli strains than in C. albicans.