Proportionality in Age Discrimination Cases - a Model Suitable for Socially Embedded Rights

This chapter discusses the use of proportionality in age discrimination cases before the Court of Justice of the European Union. It argues that the Court does not use this concept systematically - indeed it exposes some contradiction that make the case law seem arbitrary - and proposes a more fruitful use of the principle, which is in line with a modern conception of human rights. The chapter argues that the principle of proportionality stems from the time when human rights served the recently liberated burgeois elite in guarding their rights to property and liberty against the state. Today, states not only respect human rights (which is fully sufficient for this elite, who can rely on their inherited wealth to fend for themselves). They also protect and promote human rights, and these activities are a precondition for human rights to be practically relevant for the whole population. This also means that state activity, which is experienced as a limitation of rights to property and liberty by some, may constitute a measure to promote and protect human rights of others. In employment law - the only field where the EU ban on age discrimination is applied - this is a typical situation. If such a situation occurs, the principle of proportionality must be applied in a bifurcated way.It is not sufficient that the limitation of property rights is proportionate for the achievement of a public policy aim. If the aim of public policy is to enable the effective use of human rights, the limitation of the state action must be proportionate to the protection and promotion of those human rights. It is argued that the principle of proportionality is superior to less structures balancing acts (e.g. the Wednesbury principle), if it is applied both ways. Going over to the field of age discrimination, the chapter identifies a number of potentially colliding aims pursued in this field. Banning age discrimination may relate to genuine aims of anti-discrimination law if bias against older or very young workers is addressed. However, the EU ban of discrimination against all ages also serves to restructure employment law and policy to the age of flexibilisation, replacing the synchronisation principle that has been predominant for the welfare states of the 20th century. The former aim is related to human rights protection, while the latter aim is not (at least not always). This has consequences for applying the proportionality test. The chapter proposes different ways to argue the most difficult age discrimination cases, where anti-discrimination rationales and flexibilisation rationales clash

Energy-Aware Rate and Description Allocation Optimized Video Streaming for Mobile D2D Communications

The proliferation problem of video streaming applications and mobile devices has prompted wireless network operators to put more efforts into improving quality of experience (QoE) while saving resources that are needed for high transmission rate and large size of video streaming. To deal with this problem, we propose an energy-aware rate and description allocation optimization method for video streaming in cellular network assisted device-to-device (D2D) communications. In particular, we allocate the optimal bit rate to each layer of video segments and packetize the segments into multiple descriptions with embedded forward error correction (FEC) for realtime streaming without retransmission. Simultaneously, the optimal number of descriptions is allocated to each D2D helper for transmission. The two allocation processes are done according to the access rate of segments, channel state information (CSI) of D2D requester, and remaining energy of helpers, to gain the highest optimization performance. Simulation results demonstrate that our proposed method (named OPT) significantly enhances the performance of video streaming in terms of high QoE and energy saving.

Hybrid optomechanics for Quantum Technologies

We review the physics of hybrid optomechanical systems consisting of a mechanical oscillator interacting with both a radiation mode and an additional matterlike system. We concentrate on the cases embodied by either a single or a multi-atom system (a Bose-Einstein condensate, in particular) and discuss a wide range of physical effects, from passive mechanical cooling to the set-up of multipartite entanglement, from optomechanical nonlocality to the achievement of non-classical states of a single mechanical mode. The reviewed material showcases the viability of hybridised cavity optomechanical systems as basic building blocks for quantum communication networks and quantum state-engineering devices, possibly empowered by the use of quantum and optimal control techniques. The results that we discuss are instrumental to the promotion of hybrid optomechanical devices as promising experimental platforms for the study of nonclassicality at the genuine mesoscopic level.

Transcending Boundaries of Creativity: Active learning in the Design Studio

This essay investigates the changing dynamics of interaction and paradigm of communication in the design studio. It analyses the process of practical implementation of interactive tools in architectural education which placed the
diversity of students’ cultural experiences, contextual awareness and individual interests as crucial resource for design innovation and inquiry. Building on Brian Lawson’s thesis on creativity in design thinking, this research project undertook
comprehensive investigation of students’ satisfaction of their roles in the studio and the room for liberal thought they are given to elaborate on genuine approach to architectural matters. The cyclical development of interactive learning strategy is explored through two different settings: first, it analyses architectural students’ position as passive/active in the studio, considering their relationships with tutors’ ideals; second, it reports on empirical strategy of students-led workshops at British schools of architecture, during which students have taken the lead of their creative design agenda. The practical implementation of interactive learning tools proved influential in helping students to personalize their design direction and to build a sense of confidence and independence.

Revision over Partial Pre-orders: A Postulational Study

Belief revision is the process that incorporates, in a consistent way,
a new piece of information, called input, into a belief base. When both belief
bases and inputs are propositional formulas, a set of natural and rational properties, known as AGM postulates, have been proposed to define genuine revision operations. This paper addresses the following important issue : How to revise a partially pre-ordered information (representing initial beliefs) with a new partially pre-ordered information (representing inputs) while preserving AGM postulates? We first provide a particular representation of partial pre-orders (called units) using the concept of closed sets of units. Then we restate AGM postulates in this framework by defining counterparts of the notions of logical entailment and logical consistency. In the second part of the paper, we provide some examples of revision operations that respect our set of postulates. We also prove that our revision methods extend well-known lexicographic revision and natural revision for both cases where the input is either a single propositional formula or a total pre-order.

Interacting supernovae and supernova impostors. SN 2007sv: the major eruption of a massive star in UGC 5979

We report the results of the photometric and spectroscopic monitoring campaign of the transient SN 2007sv. The observables are similar to those of Type IIn supernovae, a well-known class of objects whose ejecta interact with pre-existing circumstellar material (CSM). The spectra show a blue continuum at early phases and prominent Balmer lines in emission; however, the absolute magnitude at the discovery of SN 2007sv (M-R=-14.25 +/- 0.38) indicate it to be most likely a supernova impostor. This classification is also supported by the lack of evidence in the spectra of very high velocity material as expected in supernova ejecta. In addition, we find no unequivocal evidence of broad lines of alpha- and/or Fe-peak elements. The comparison with the absolute light curves of other interacting objects (including Type IIn supernovae) highlights the overall similarity with the prototypical impostor SN 1997bs. This supports our claim that SN 2007sv was not a genuine supernova, and was instead a supernova impostor, most likely similar to the major eruption of a luminous blue variable.

Measuring beta diversity for presence-absence data

1. Little consensus has been reached as to general features of spatial variation in beta diversity, a fundamental component of species diversity. This could reflect a genuine lack of simple gradients in beta diversity, or a lack of agreement as to just what constitutes beta diversity. Unfortunately, a large number of approaches have been applied to the investigation of variation in beta diversity, which potentially makes comparisons of the findings difficult.

2. We review 24 measures of beta diversity for presence/absence data (the most frequent form of data to which such measures are applied) that have been employed in the literature, express many of them for the first time in common terms, and compare some of their basic properties.

3. Four groups of measures are distinguished, with a fundamental distinction arising between 'broad sense' measures incorporating differences in composition attributable to species richness gradients, and 'narrow sense' measures that focus on compositional differences independent of such gradients. On a number of occasions on which the former have been employed in the literature the latter may have been more appropriate, and there are many situations in which consideration of both kinds of measures would be valuable.

4. We particularly recommend (i) considering beta diversity measures in terms of matching/mismatching components (usually denoted a , b and c) and thereby identifying the contribution of different sources of variation in species composition, and (ii) the use of ternary plots to express the relationship between the values of these measures and of the components, and as a way of understanding patterns in beta diversity.

A well-to-wheel analysis of electric vehicles in the all-island Single Electricity Market

The European Union has set a target for 10% renewable energy in transport by 2020 to be met using biofuels and electric vehicles. In the case of biofuels, the biofuel must achieve greenhouse gas savings of 35% relative to the fossil fuel replaced. For biofuels, greenhouse gas savings can be calculated using life cycle analysis or the European Union default values. In contrast, all electricity used in transport is considered to be the same, regardless of the source or the type of electric vehicle. However, the choice of the electric vehicle and electricity source will have a major impact on the greenhouse gas saving. In this paper the initial findings of a well-to-wheel analysis of electric vehicle deployment in Northern Ireland are presented. The key finding indicates that electric vehicles require least amount of energy per mile on a well-to-wheel basis, consume the fewest resources, even accommodating inefficient fuel production, in comparison to standard internal combustion engine and hybrid vehicles.

Time Efficient Assessment and Feedback Methods for Large Computer-Aided-Design Cohorts

Timely and individualized feedback on coursework is desirable from a student perspective as it facilitates formative development and encourages reflective learning practice. Faculty however are faced with a significant and potentially time consuming challenge when teaching larger cohorts if they are to provide feedback which is timely, individualized and detailed. Additionally, for subjects which assess non-traditional submissions, such as Computer-Aided-Design (CAD), the methods for assessment and feedback tend not to be so well developed or optimized. Issues can also arise over the consistency of the feedback provided. Evaluations of Computer-Assisted feedback in other disciplines (Denton et al, 2008), (Croft et al, 2001) have shown students prefer this method of feedback to traditional “red pen” marking and also that such methods can be more time efficient for faculty.
Herein, approaches are described which make use of technology and additional software tools to speed up, simplify and automate assessment and the provision of feedback for large cohorts of first and second year engineering students studying modules where CAD files are submitted electronically. A range of automated methods are described and compared with more “manual” approaches. Specifically one method uses an application programming interface (API) to interrogate SolidWorks models and extract information into an Excel spreadsheet, which is then used to automatically send feedback emails. Another method describes the use of audio recordings made during model interrogation which reduces the amount of time while increasing the level of detail provided as feedback.
Limitations found with these methods and problems encountered are discussed along with a quantified assessment of time saving efficiencies made.

Optimal design of long-span steel portal frames using fabricated beams

This paper considers the optimal design of fabricated steel beams for long-span portal frames. The design optimisation takes into account ultimate as well as serviceability limit states, adopting deflection limits recommended by the Steel Construction Institute (SCI). Results for three benchmark frames demonstrate the efficiency of the optimisation methodology. A genetic algorithm (GA) was used to optimise the dimensions of the plates used for the columns, rafters and haunches. Discrete decision variables were adopted for the thickness of the steel plates and continuous variables for the breadth and depth of the plates. Strategies were developed to enhance the performance of the GA including solution space reduction and a hybrid initial population half of which is derived using Latin hypercube sampling. The results show that the proposed GA-based optimisation model generates optimal and near-optimal solutions consistently. A parametric study is then conducted on frames of different spans. A significant variation in weight between fabricated and conventional hot-rolled steel portal frames is shown; for a 50 m span frame, a 14–19% saving in weight was achieved. Furthermore, since Universal Beam sections in the UK come from a discrete section library, the results could also provide overall dimensions of other beams that could be more efficient for portal frames. Eurocode 3 was used for illustrative purposes; any alternative code of practice may be used.

How Critical Care Nurses' Role and Education Affect Organ Donation

Organ and tissue dysfunction and failure cause high mortality rates around the world. Tissue and organs transplantation is an established, cost-effective, life-saving treatment for patients with organ failure. However, there is a large gap between the need for and the supply of donor organs. Acute and critical care nurses have a central role in the organ donation process, from identifying and assessing potential donors and supporting their families to involvement in logistics. Nurses with an in-depth knowledge of donation understand its clinical and technical aspects as well as the moral and legal considerations. Nurses have a major role to play in tackling organ and tissue shortages. Such a role cannot be adequately performed if nurses are not fully educated about donation and transplant. Such education could be incorporated into mandatory training and completed by all nurses.

Application-Level Energy Awareness for OpenMP

Power, and consequently energy, has recently attained first-class system resource status, on par with conventional metrics such as CPU time. To reduce energy consumption, many hardware- and OS-level solutions have been investigated. However, application-level information - which can provide the system with valuable insights unattainable otherwise - was only considered in a handful of cases. We introduce OpenMPE, an extension to OpenMP designed for power management. OpenMP is the de-facto standard for programming parallel shared memory systems, but does not yet provide any support for power control. Our extension exposes (i) per-region multi-objective optimization hints and (ii) application-level adaptation parameters, in order to create energy-saving opportunities for the whole system stack. We have implemented OpenMPE support in a compiler and runtime system, and empirically evaluated its performance on two architectures, mobile and desktop. Our results demonstrate the effectiveness of OpenMPE with geometric mean energy savings across 9 use cases of 15 % while maintaining full quality of service.

Limitations of a measurement-assisted optomechanical route to quantum macroscopicity of superposition states

Optomechanics is currently believed to provide a promising route towards the achievement of genuine quantum effects at the large, massive-system scale. By using a recently proposed figure of merit that is well suited to address continuous-variable systems, in this paper we analyze the requirements needed for the state of a mechanical mode (embodied by an end-cavity cantilever or a membrane placed within an optical cavity) to be qualified as macroscopic. We show that, according to the phase space-based criterion that we have chosen for our quantitative analysis, the state achieved through strong single-photon radiation-pressure coupling to a quantized field of light and conditioned by measurements operated on the latter might be interpreted as macroscopically quantum. In general, though, genuine macroscopic quantum superpositions appear to be possible only under quite demanding experimental conditions

Interpretation of flat FRP coupon test results

The tensile strength obtained from existing testing methods such as ASTM D3039, based on flat coupons, usually has a large scatter for fibre reinforced polymer (FRP) composites. This means that the measured strength may not represent the actual strength of the material, leading to under or over design. This paper develops a new interpretation method which requires fewer tests, saving money and time. Moreover the results are more consistent and more closely represent the actual strength which can lead to a safer and more economical design.

Control energy consumption and system performance in vector control of voltage source converters

Power electronics plays an important role in the control and conversion of modern electric power systems. In particular, to integrate various renewable energies using DC transmissions and to provide more flexible power control in AC systems, significant efforts have been made in the modulation and control of power electronics devices. Pulse width modulation (PWM) is a well developed technology in the conversion between AC and DC power sources, especially for the purpose of harmonics reduction and energy optimization. As a fundamental decoupled control method, vector control with PI controllers has been widely used in power systems. However, significant power loss occurs during the operation of these devices, and the loss is often dissipated in the form of heat, leading to significant maintenance effort. Though much work has been done to improve the power electronics design, little has focused so far on the investigation of the controller design to reduce the controller energy consumption (leading to power loss in power electronics) while maintaining acceptable system performance. This paper aims to bridge the gap and investigates their correlations. It is shown a more thoughtful controller design can achieve better balance between energy consumption in power electronics control and system performance, which potentially leads to significant energy saving for integration of renewable power sources.