The Vertical Distribution and Evolution of Slam Pressure on an Oscillating Wave Surge Converter

The accurate definition of the extreme wave loads which act on offshore structures represents a significant challenge for design engineers and even with decades of empirical data to base designs upon there are still failures attributed to wave loading. The environmental conditions which cause these loads are infrequent and highly non-linear which means that they are not well understood or simple to describe. If the structure is large enough to affect the incident wave significantly further non-linear effects can influence the loading. Moreover if the structure is floating and excited by the wave field then its responses, which are also likely to be highly non-linear, must be included in the analysis. This makes the description of the loading on such a structure difficult to determine and the design codes will often suggest employing various tools including small scale experiments, numerical and analytical methods, as well as empirical data if available.
Wave Energy Converters (WECs) are a new class of offshore structure which pose new design challenges, lacking the design codes and empirical data found in other industries. These machines are located in highly exposed and energetic sites, designed to be excited by the waves and will be expected to withstand extreme conditions over their 25 year design life. One such WEC is being developed by Aquamarine Power Ltd and is called Oyster. Oyster is a buoyant flap which is hinged close to the seabed, in water depths of 10 to 15m, piercing the water surface. The flap is driven back and forth by the action of the waves and this mechanical energy is then converted to electricity.
It has been identified in previous experiments that Oyster is not only subject to wave impacts but it occasionally slams into the water surface with high angular velocity. This slamming effect has been identified as an extreme load case and work is ongoing to describe it in terms of the pressure exerted on the outer skin and the transfer of this short duration impulsive load through various parts of the structure.
This paper describes a series of 40th scale experiments undertaken to investigate the pressure on the face of the flap during the slamming event. A vertical array of pressure sensors are used to measure the pressure exerted on the flap. Characteristics of the slam pressure such as the rise time, magnitude, spatial distribution and temporal evolution are revealed. Similarities are drawn between this slamming phenomenon and the classical water entry problems, such as ship hull slamming. With this similitude identified, common analytical tools are used to predict the slam pressure which is compared to that measured in the experiment.

Effect of feed space allowance and period of access to food on dairy cow performance

Two experiments were conducted to examine the ‘long-term’ effect of feed space allowance and period of access to feed on dairy cow performance. In Experiment 1, three horizontal feed space allowances (20, 40 and 60 cm cow−1) were examined over a 127-d period (14 cows per treatment). In Experiment 2, 48 dairy cows were used in a continuous design (10-week duration) 2 × 2 factorial design experiment comprising two horizontal feed space allowances (15 and 40 cm cow−1), and two periods of access to feed (unrestricted and restricted). With the former, uneaten feed was removed at 08·00 h, while feeding took place at 09·00 h. With the latter, uneaten feed was removed at 06·00 h, while feeding was delayed until 12·00 h. Mean total dry-matter (DM) intakes were 19·0, 18·7 and 19·3 kg cow−1 d−1 with the 20, 40 and 60 cm cow−1 treatments in Experiment 1, and 18·1 and 18·2 kg cow−1 d−1 with the ‘restricted feeding time’ treatments, and 17·8 and 18·1 kg d−1 with the ‘unrestricted feeding time’ treatments (15 and 40 cm respectively) in Experiment 2. None of milk yield, milk composition, or end-of-study live weight or condition score were significantly affected by treatment in either experiment (P > 0·05), while fat + protein yield was reduced with the 15-cm treatment in Experiment 2 (P < 0·05). When access to feed was restricted by space or time constraints, cows modified their time budgets and increased their rates of intake.

Cross-age tutoring in kindergarten and elementary school settings: A systematic review and meta-analysis

This systematic review summarizes effects of peer tutoring delivered to children between 5 and 11 years old by non-professional tutors, such as classmates, older children and adult community peer volunteers. Inclusion criteria for the review included tutoring studies with a randomized controlled trial design, reliable measures of academic outcomes, and duration of at least 12 weeks. Searches of electronic databases, previous reviews, and contacts with researchers yielded 11,564 titles. After screening, 15 studies were included in the analysis. Cross-age tutoring showed small significant effects for tutees on the composite measure of reading (g = 0.18, 95% CI: 0.08, 0.27, N = 8251), decoding skills (g = 0.29, 95% CI: 0.13, 0.44, N = 7081), and reading comprehension (g = 0.11, 95% CI: 0.01, 0.21, N = 6945). No significant effects were detected for other reading sub-skills or for mathematics. The benefits to tutees of non-professional cross-age peer tutoring can be given a positive, but weak recommendation. Effect Sizes were modest and in the range −0.02 to 0.29. Questions regarding study limitations, lack of cost information, heterogeneity of effects, and the relatively small number of studies that have used a randomized controlled trial design means that the evidence base is not as strong as it could be. Subgroup analyses of included studies indicated that highly-structured reading programmes were of more benefit than those that were loosely-structured. Large-scale replication trials using factorial designs, reliable outcome measures, process evaluations and logic models are needed to better understand under what conditions, and for whom, cross-age non-professional peer tutoring may be most effective.

Stiffness Analysis and Experiment of a Novel 5-DoF Parallel Kinematic Machine Considering Gravitational Effects

In order to carry out high-precision machining of aerospace structural components with large size, thin wall and complex surface, this paper proposes a novel parallel kinematic machine (PKM) and formulates its semi-analytical theoretical stiffness model considering gravitational effects that is verified by stiffness experiments. From the viewpoint of topology structure, the novel PKM consists of two substructures in terms of the redundant and overconstrained parallel mechanisms that are connected by two interlinked revolute joints. The theoretical stiffness model of the novel PKM is established based upon the virtual work principle and deformation superposition principle after mapping the stiffness models of substructures from joint space to operated space by Jacobian matrices and considering the deformation contributions of interlinked revolute joints to two substructures. Meanwhile, the component gravities are treated as external payloads exerting on the end reference point of the novel PKM resorting to static equivalence principle. This approach is proved by comparing the theoretical stiffness values with experimental stiffness values in the same configurations, which also indicates equivalent gravity can be employed to describe the actual distributed gravities in an acceptable accuracy manner. Finally, on the basis of the verified theoretical stiffness model, the stiffness distributions of the novel PKM are illustrated and the contributions of component gravities to the stiffness of the novel PKM are discussed.

Clinical trial designs for rare diseases: Studies developed and discussed by the International Rare Cancers Initiative

BACKGROUND: The past three decades have seen rapid improvements in the diagnosis and treatment of most cancers and the most important contributor has been research. Progress in rare cancers has been slower, not least because of the challenges of undertaking research.

SETTINGS: The International Rare Cancers Initiative (IRCI) is a partnership which aims to stimulate and facilitate the development of international clinical trials for patients with rare cancers. It is focused on interventional--usually randomized--clinical trials with the clear goal of improving outcomes for patients. The key challenges are organisational and methodological. A multi-disciplinary workshop to review the methods used in ICRI portfolio trials was held in Amsterdam in September 2013. Other as-yet unrealised methods were also discussed.

RESULTS: The IRCI trials are each presented to exemplify possible approaches to designing credible trials in rare cancers. Researchers may consider these for use in future trials and understand the choices made for each design.

INTERPRETATION: Trials can be designed using a wide array of possibilities. There is no 'one size fits all' solution. In order to make progress in the rare diseases, decisions to change practice will have to be based on less direct evidence from clinical trials than in more common diseases.

Experiment of Digital Directional Modulation Transmitters

A digital directional modulation (DM) transmitter structure is proposed from a practical implementation point of view in this paper. This digital DM architecture is built with the help of several off-the-shelf physical layer wireless experiment platform hardware boards. When compared with previous analogue DM transmitter architectures, the digital means offers more precise and fast control on the updates of the array excitations. More importantly, it is an ideal physical arrangement to implement the most universal DM synthesis algorithm, i.e., the orthogonal vector approach. The practical issues in digital DM system calibrations are described and solved. The bit error rates (BERs) are measured via real-time data transmissions to illustrate the DM advantages, in terms of secrecy performance, over conventional non-DM beam-steering transmitters.

A First Step Towards Cost Functions for Quantum-dot Cellular Automata Designs

Quantum-dot cellular automata (QCA) is potentially a very attractive alternative to CMOS for future digital designs. Circuit designs in QCA have been extensively studied. However, how to properly evaluate the QCA circuits has not been carefully considered. To date, metrics and area-delay cost functions directly mapped from CMOS technology have been used to compare QCA designs, which is inappropriate due to the differences between these two technologies. In this paper, several cost metrics specifically aimed at QCA circuits are studied. It is found that delay, the number of QCA logic gates, and the number and type of crossovers, are important metrics that should be considered when comparing QCA designs. A family of new cost functions for QCA circuits is proposed. As fundamental components in QCA computing arithmetic, QCA adders are reviewed and evaluated with the proposed cost functions. By taking the new cost metrics into account, previous best adders become unattractive and it has been shown that different optimization goals lead to different “best” adders.

Strategic behaviour in choice experiments.

Practitioners of environmental economics sometimes use repeated trinary choice experiment surveys to estimate the value of environmental policies and programs for use in policy evaluation. These surveys have several advantages over simpler forms of non-market valuation: (1) researchers can estimate the marginal value of attributes of the good or service in question, making the results useful for benefits transfer; and (2) because respondents make several choices and choose from choice sets containing three options, efficiency of the willingness to pay estimate is improved over one-shot, binary choice formats. Despite these benefits, such surveys may have incentive properties which cause the resulting value estimates to be biased. This paper presents a theoretical demonstration that subjects often have an incentive to choose the second-best option in a repeated trinary choice survey. The model shows that due to the nature of factorial choice set design, the second-best option in the choice set will often be the status quo option. The paper reports a set of experiments designed to test these theoretical predictions in an induced-value setting. The experimental results are consistent with the theoretical predictions, demonstrating that repeated trinary choice experiment surveys can generate biased value estimates under a wide range of conditions.

Comparison of optimal designs of steel portal frames including topological asymmetry considering rolled, fabricated and tapered sections

A structural design optimisation has been carried out to allow for asymmetry and fully tapered portal frames. The additional weight of an asymmetric structural shape was found to be on average 5–13% with additional photovoltaic (PV) loading having a negligible effect on the optimum design. It was also shown that fabricated and tapered frames achieved an average percentage weight reduction of 9% and 11%, respectively, as compared to comparable hot-rolled steel frames. When the deflection limits recommended by the Steel Construction Institute were used, frames were shown to be deflection controlled with industrial limits yielding up to 40% saving.