Accessibility and Health: Towards Walkability Tools for Planning Practice

There is increasing research interest in how we can most effectively intervene in the built environment to change behaviours such as physical activity and improve health. Much of this work has focussed around the concept of walkability and the identification of those attributes of our cities that encourage pedestrian activity, including density, connectivity and the aesthetic of the urban realm (Saelens et al 2003, Frank et al 2010). Much of the existing research has clarified the strength of the relationships between various environmental attributes and the differential impact on different demographic groups (e.g. Panter et al 2011). This has not yet been effectively translated into tools to help integrate the concepts of walkability into decision-making by statutory authorities that can help shape the spatial development and delivery of public services which can support more active lifestyles. A key reason for this has been that standard models for transport planning and accessibility are based on networks of road infrastructure, which provides a weak basis for modelling pedestrian accessibility (Chin et al 2008).

This paper reports the findings of Knowledge Exchange project funded by UK’s Economic and Social Research Council (ES/J010588/1) and partners including Belfast and Derry City Councils and Northern Ireland’s Public Health Agency, the Department of Regional Development and Belfast Healthy Cities, that has attempted to address this problem. This project has mapped city-wide footpath networks and used these to assist partner organisations in developing the evidence base for making decisions on public services based on health impacts and pedestrian access. The paper describes the tool developed, uses a number of examples to highlight its impact on areas of decision-making and evaluates the benefits of further integrating walkability into planning and development practice.

An automatic COLREGs-compliant obstacle avoidance system for an unmanned surface vehicle

Unmanned surface vehicles are becoming increasingly vital tools in a variety of maritime applications. Unfortunately, their usability is severely constrained by the lack of a reliable obstacle detection and avoidance system. In this article, one such experimental platform is proposed, which performs obstacle detection, risk assessment and path planning (avoidance) tasks autonomously in an integrated manner. The detection system is based on a vision-LIDAR (light detection and ranging) system, whereas a heuristic path planner is utilised. A unique property of the path planner is its compliance with the marine collision regulations. It is demonstrated through hardware-in-the-loop simulations that the proposed system can be useful for both uninhabited and manned vessels.

Nonadherence in difficult asthma - facts, myths, and a time to act

Nonadherence to prescribed treatment is an important cause of difficult asthma. Rates of nonadherence amongst asthmatic patients have been shown to range between 30% and 70%. This is associated with poor health care outcomes and increased health care costs. There is no such thing as a "typical" nonadherent patient. The reasons driving nonadherence are multifactorial. Furthermore, adherence is a variable behavior and not a trait characteristic. Adherence rates can vary between the same individual across treatments for different conditions. There is no consistent link between socioeconomic status and nonadherence, and although some studies have shown that nonadherence is more common amongst females, this is not a universal finding. The commonly held perception that better adherence is driven by greater disease severity has been demonstrated to not be the case, in both pediatric and adult patients. Identification of nonadherence is the first step. If adherence is not checked, it is likely that poor adherence will be labeled as refractory disease. Failure to identify poor adherence may lead to inappropriate escalation of therapy, including the potential introduction of complex biological therapies. Surrogate measures, such as prescription counting, are not infallible. Nonadherence can be difficult to identify in clinical practice, and a systematic approach using a variety of tools is required. Nonadherence can be successfully addressed. Therefore, assessment of adherence is of paramount importance in difficult asthma management, in order to reduce exacerbations and steroid-related side effects as well as hospital and intensive care admissions, health care cost, and inappropriate treatment escalation. In this paper, we present an overview of the literature surrounding nonadherence in difficult asthma. We explore the facts and myths surrounding the factors driving nonadherence as well as how it can be identified and addressed.

Using Mesh-Geometry Relationships to Transfer Analysis Models between CAE Tools

Integrating analysis and design models is a complex task due to differences between the models and the architectures of the toolsets used to create them. This complexity is increased with the use of many different tools for specific tasks during an analysis process. In this work various design and analysis models are linked throughout the design lifecycle, allowing them to be moved between packages in a way not currently available. Three technologies named Cellular Modeling, Virtual Topology and Equivalencing are combined to demonstrate how different finite element meshes generated on abstract analysis geometries can be linked to their original geometry. Establishing the equivalence relationships between models enables analysts to utilize multiple packages for specialist tasks without worrying about compatibility issues or rework.

Meeting the Requirements of the CDM Regulations: Identification of Critical Success Factors of Small to Medium Sized Contractor’ Compliance in the UK Construction Industry

The Construction Design and Management (CDM) Regulations (2007) is one of the most important set of health and safety regulations in the construction industry today. The aim of this research is to examine critical success factors for CDM compliance in small to medium size contractors in the UK construction industry. The objectives of the research include the identification of critical barriers in doing so along with the identification of success factors where CDM is incorporated. A mixed method approach is adopted in the identification and categorisation of the various factors encompassing a literature review, interviews and questionnaire survey. The key finding which emerge is the lack of knowledge and understanding with regards the CDM regulations with the recommendation to encourage small and medium contractor compliance through illustrating the benefits attainable. The practicality of the research is evident based on the significant uptake in the CDM by larger contractors, yet the research indicates that further insight and guidance is required to educate and inform those working within small to medium sized contractors in the UK. Where such acknowledgement and compliance is adopted, it is envisaged that this sector will benefit from reduced incidents and accidents, increased productivity while ultimately leading to a safer and more productive industry as a whole.

Disordered vascular compliance in haemochromatosis

Background: A relationship may exist between body iron stores, endothelial dysfunction and overall cardiovascular risk.

Aims: To compare vascular compliance, biochemical endothelial function and antioxidant status between patients with homozygous hereditary haemochromatosis and healthy controls.

Methods: Haemochromatosis patients and healthy controls were recruited. Measures of vascular compliance were assessed by applanation tonometry. Serological markers of endothelial function (plasma lipid hydroperoxides, cell adhesion molecules), antioxidant levels (ascorbate, lipid soluble antioxidants) and high-sensitivity C-reactive protein (CRP) were also measured.

Results: Thirty-five hereditary haemochromatosis patients (ten females, mean age 54.6) and 36 controls (27 female, mean age 54.0) were recruited. Haemochromatosis patients had significantly higher systolic and diastolic blood pressures. Pulse wave velocity (PWV) was significantly higher in male haemochromatosis patients (9.90 vs. 8.65 m/s, p = 0.048). Following adjustment for age and blood pressure, male haemochromatosis patients continued to have a trend for higher PWVs (+1.37 m/s, p = 0.058). Haemochromatosis patients had significantly lower levels of ascorbate (46.11 vs. 72.68 lmol/L, p = 0.011), retinol (1.17 vs. 1.81 lmol/L, p = 0.001) and g-tocopherol (2.51 vs. 3.14 lmol/L, p = 0.011). However, there was no difference in lipid hydroperoxides (0.46 vs. 0.47 nmol/L, p = 0.94), cell adhesion molecule levels (ICAM: 348.12 vs. 308.03 ng/mL, p = 0.32 and VCAM: 472.78 vs. 461.31 ng/mL, p = 0.79) or high-sensitivity CRP (225.01 vs. 207.13 mg/L, p = 0.32).

Conclusions: Haemochromatosis is associated with higher PWVs in males and diminished antioxidants across the sexes but no evidence of endothelial dysfunction or increased lipid peroxidation.

Experimental and numerical studies on rock breaking with TBM tools under high stress confinement

The understanding of rock breaking and chipping due to the TBM cutter disks mechanism in deep tunnels is considered in this paper. The interest stems from the use of TBMs for the excavation of long Trans-Alpine tunnels. Some tests that simulate the disk cutter action at the tunnel face by means of an indenter, acting on a rock specimen are proposed. The rock specimen is confined through a flat-jack and a confinement-free area on one side of the specimen simulates the formation of a groove near the indenter, like it occurs in TBM excavation conditions. Results show a limited influence of the confinement stress versus the thrust increment required for breaking the rock between the indenter and the free side of the specimen. Numerical modelling of the cutter disk action on confined material has also been carried out in order to investigate further aspects of the fracture initiation. Also in this case the importance of the relative position between disk cutter and groove is pointed out. © 2006 Springer-Verlag.

Fetal Umbilical Artery Doppler Pulsatility Index as a Predictor of Cardiovascular Risk Factors in Children - A Long-Term Follow Up Study

Abstract Objective To determine if high umbilical artery Doppler (UAD) pulsatility index (PI) is associated with cardio-vascular (CV) risk-factors in children at age 12 years. Methods We studied 195 children at age 12 years who had had in-utero UAD studies performed at 28 weeks gestation. The children were grouped according to whether their umbilical Doppler PI was high (indicating poor feto-placental circulation) or normal. At age 12 years we assessed CV risk factors, including anthropometric measures, blood pressure, pulse wave velocity (a measure of arterial compliance), cardio-respiratory fitness and homocysteine and cholesterol serum levels. Results Compared with children with a normal UAD PI (N=88), the children (N=107) with high UAD PI had higher resting pulse rate (p=0.04), higher pulse wave velocity (p=0.046), higher serum homocysteine levels (p=0.032) and reduced arterial compliance (7.58 v 8.50 m/sec, p=0.029) using univariate analysis. These differences were not present when adjusting for cofounders was modelled. Conclusion High PI on UAD testing in-utero may be associated with increased likelihood of some cardio-vascular risk factors at age 12-years but confounding variables may be as important. Our study raises possible long-term benefits of in-utero UAD measurements.

Delamination and wear in drilling of carbon-fiber reinforced plastic composites using multilayer TiAlN/TiN PVD-coated tungsten carbide tools

This study aims to investigate drilling process in carbon-fiber reinforced plastic (CFRP) composites with multilayer TiAlN/TiN PVD-coated tungsten carbide drill. The effect of process parameters have been investigated in drilling of Hexcel M21-T700GC. Thrust force and torque were measured online throughout the drilling experiments. Delamination were observed using optical microscope and analyzed via a developed algorithm based on digital image processing technique. Surface roughness of each hole was measured using a surface profilometer. In addition, the progression of tool wear in various surfaces of drill was observed using tool microscope and measured using image software. Our results indicate that the thrust force and torque increased with the increasing cutting speed and feed rate. Delamination and average surface roughness that rose with the increase in feed rate, however, decreased with the increasing cutting speed. The average surface roughness tended to increase with the increase in feed rate and decrease with the increasing cutting speed in drilling of carbon-fiber reinforced plastic (CFRP). Feed rate was found as the predominant factor on the drilling outputs. Abrasive wear was observed on both flank and relief surfaces, which created edge wear on cutting edges. No sign of chipping or plastic deformation has been observed on the surfaces of drills. © 2012 The Author(s).

Brunetta’s reform swan song? An assessment of its success in local governments through the analysis of its tools

The work aims at assessing the success of Brunetta’s reform (Legislative Decree n. 150/2009), a far-reaching reform that aimed at improving both organizational and individual performance in Italian public administration through a specific planning and control process (the performance cycle) and most of all through two new tools, Performance Plan and Performance Report. The success of the reform is assessed, with particular emphasis on local governments, analyzing the diffusion and use of these new tools. The study has been conducted using a deductive-inductive methodology. Thus, after a study of managerial reforms in Italy and performance measurement literature, a possible model (PerformEL Model) local governments could follow to draw up Performance Plan and Report as effective tools for performance measurement has been designed (deductive phase). Performance Plans 2011-2013 and Performance Report 2011 downloaded from Italian big sized municipalities’ websites have been analyzed in the light of PerformEL Model, to assess the diffusion of the documents and their coherence with legal requirements and suggestions from literature (inductive phase). Data arising from the empirical analysis have been studied to evaluate the diffusion and the effectiveness of big sized municipalities’ Performance Plans and Reports as performance measurement tools and thus to assess the success of the reform (feedback phase). The study shows a scarce diffusion of the documents; they are mostly drew up because of their compulsoriness or to gain legitimization. The results testify the failure of Brunetta’s reform, at least with regard to local governments.

In pursuit of regulatory compliance: a study of planning enforcement structures in Northern Ireland

As devolution expands across the UK, Northern Ireland (NI) is witnessing the development of new architecture to devolve planning powers. With serious criticism targeted at the legislative provisions for enforcement, this investigation endeavours to assess the robustness of the planning framework through a synergy of theory, law and practice. The paper demonstrates the value of theory in not only supplying a lens that allows both legislative frameworks and praxis to be deconstructed, but also in enabling the identification and scrutiny of underlying problems that pervade the system.

Tools for Finding Inconsistencies in Real-world Logic-based Systems

Currently there is extensive theoretical work on inconsistencies in logic-based systems. Recently, algorithms for identifying inconsistent clauses in a single conjunctive formula have demonstrated that practical application of this work is possible. However, these algorithms have not been extended for full knowledge base systems and have not been applied to real-world knowledge. To address these issues, we propose a new algorithm for finding the inconsistencies in a knowledge base using existing algorithms for finding inconsistent clauses in a formula. An implementation of this algorithm is then presented as an automated tool for finding inconsistencies in a knowledge base and measuring the inconsistency of formulae. Finally, we look at a case study of a network security rule set for exploit detection (QRadar) and suggest how these automated tools can be applied.