Renal replacement treatment for diabetic nephropathy in Northern Ireland 1979-1987

Twenty-three patients with end-stage renal failure due to diabetic nephropathy received renal replacement treatment. All patients had insulin-dependent diabetes mellitus. Nineteen transplants were performed in seventeen patients. Two-year graft survival for all transplants was 74% with a two-year patient survival post-transplantation of 81%. Overall two-year patient survival was 73%, compared with 82% in non-diabetic patients receiving renal replacement treatment. In diabetic patients accepted for treatment there was a high incidence of non-renal complications, particularly vascular disease. An aggressive approach to the treatment of vascular disease in these patients may improve overall survival rates.

Renal replacement therapy in multiple myeloma and systemic amyloidosis

Renal failure frequently complicates both multiple myeloma and systemic amyloidosis. Renal replacement therapy (RRT) may be poorly tolerated and its role in such patients is not clearly defined. Of fifty patients (26 males and 24 females) referred to a single centre because of renal failure associated with multiple myeloma or systemic amyloidosis 37 progressed to end-stage renal failure and 30 of these patients received RRT. Nine patients have been treated by CAPD, 13 by haemodialysis, and 8 patients have required both forms of dialysis. Overall one year and two year survival rates were 66% and 57% respectively. The median duration on RRT was 7.5 months (range 1-96 months) with a 51% one year, and a 46% two year survival rate. Of 7 patients with amyloidosis who underwent renal transplantation, 3 died within 6 months of transplantation. Undiagnosed cardiac involvement contributed to this early mortality. We conclude that renal replacement therapy is appropriate for some patients with multiple myeloma and systemic amyloidosis who develop endstage renal failure. Careful assessment and selection of patients is necessary prior to renal transplantation.

Nitrofurazone accumulates in avian eyes - a replacement for semicarbazide as a marker of abuse

Intact nitrofurazone is present in whole eyes of chickens fed varying levels of this banned antibiotic and may therefore be used as an alternative to the controversial marker residue, semicarbazide, to monitor for abuse of this drug in primary production.

Comorbidities and current smoking status amongst patients starting renal replacement therapy in England, Wales and Northern Ireland from 2003 to 2008: national and centre-specific analyses

Introduction: The prevalence of comorbidities in incident renal replacement therapy (RRT) patients changes with age and varies between ethnic groups. This study describes these associations and the independent effect of comorbidities on outcomes. Methods: Adult patients starting RRT between 2003 and 2008 in centres reporting to the UK Renal Registry (UKRR) with data on comorbidity (n ¼ 14,909) were included. The UKRR studied the association of comorbidity with patient demographics, treatment modality, haemoglobin, renal function at start of RRT and subsequent listing for kidney transplantation. The relationship between comorbidities and mortality at 90 days and one year after 90 days from start of RRT was explored using Cox regression. Results: Completeness of comorbidity data was 40.0% compared with 54.3% in 2003. Of patients with data, 53.8% had one or more comorbidities. Diabetes mellitus and ischaemic heart disease were the most common conditions seen in 30.1% and 22.7% of patients respectively. Current smoking was recorded for 14.5% of incident RRT patients in the 6-year period. Comorbidities became more common with increasing age in all ethnic groups although the difference between the 65–74 and 75+ age groups was not significant. Within each age group, South Asians and Blacks had lower rates of comorbidity, despite higher rates of diabetes mellitus. In multivariate survival analysis, malignancy and ischaemic/neuropathic ulcers were the strongest independent predictors of poor survival at 1 year after 90 days from the start of RRT. Conclusion: Differences in prevalence of comorbid illnesses in incident RRT patients may reflect variation in access to health care or competing risk prior to commencing treatment. At the same time, smoking rates remained high in this ‘at risk’ population. Further work on this and ways to improve comorbidity reporting should be priorities for 2010–11.

Comorbidities and current smoking status amongst patients starting renal replacement therapy in England, Wales and Northern Ireland: national and centre-specific analyses

Introduction: The prevalence of 13 comorbid conditions and smoking status at the time of starting renal replacement therapy (RRT) in England, Wales and Northern Ireland are described. Methods: Adult patients starting RRT between 2002 and 2007 in centres reporting to the UK Renal Registry (UKRR) and with data on comorbidity (n¼13,293) were included. The association of comorbidity with patient demographics, treatment modality, haemoglobin, renal function at start of RRT and subsequent listing for kidney transplantation were studied. Association between comorbidities and mortality at 90 days and one year after 90 days from start of RRT was explored using Cox regression. Results: Completeness of data on comorbidity returned to the UKRR remained poor. Of patients with data, 52% had one or more comorbidities. Diabetes mellitus and ischaemic heart disease were the most common conditions seen in 28.9% and 22.5% of patients respectively. Comorbidities became more common with increasing age (up to the 65–74 age group), were more common amongst Whites and were associated with a lower likelihood of pre-emptive transplantation, a greater likelihood of starting on haemodialysis (rather than peritoneal dialysis) and a lower likelihood of being listed for kidney transplantation. In multivariable survival analysis, malignancy and ischaemic/neuropathic ulcers were the strongest predictors of poor survival at 1 year after 90 days from start of RRT. Conclusions: The majority of patients had at least one comorbid condition and comorbidity is an important predictor of early mortality on RRT.

Influence of the type of coarse lightweight aggregate on properties of Semi-Lightweight Self-Consolidating Concrete

This paper presents studies on the properties of fresh and hardened semilightweight self-consolidating concrete (SLWSCC) mixtures, produced with two types of manufactured coarse lightweight aggregates (LWA) and normal weight sand. The first type, a sintered pulverized fuel ash, was made from an industrial by-product, fly ash, whereas the second one, an expanded clay, was produced from a naturally sourced clay. For all mixtures, normal weight sand was used as a fine fraction of aggregates, and the portland cement was partially replaced with a limestone powder. The SLWSCC was produced with different water presaturation regimes of the LWAs. The desired initial slump-flow spread was set between 700 and 800 mm. The effect of three superplasticizers was evaluated by testing properties of SLWSCC, normal weight SCC, and paste mixtures. Three SCC fresh properties were measured: the slump-flow, the V-funnel flow time, and the J-ring blocking step. Moreover, the slump-flow loss was evaluated. The degree of segregation was assessed in both fresh and hardened states. Additionally, the hardened density and the compressive strengths were tested. All SLWSCC mixtures were produced with a desired range of slump-flow spread and with satisfactory passing ability assessed with the J-ring test. SLWSCCs prepared with the expanded clay LWA were less sensitive to the variation of water presaturation levels and showed lower viscosity than those made with the sintered pulverized fuel ash LWA. Only mixtures containing SP-3 superplasticizer showed acceptable workability loss resistance. The saturated surface-dry density of all of the mixtures varied in a range of 2,025–2,125??kg/m 3 . Mixtures containing 29% of coarse LWAs and 71% of sand (by mass) had 24-h and 28-day compressive strengths above 20 and 40 MPa, respectively, but the mixtures made with the expanded clay were slightly weaker.

Life Cycle Assessment guidelines for the sustainable production and recycling of aggregates:The Sustainable Aggregates Resource Management project (SARMa)

The mining/quarrying industry is a sector of industry where there are very few Life Cycle Assessment (LCA) tools, and where the role of LCA has been poorly investigated. A key issue is the integration of three inter-dependent life cycles: Project, Asset and Product. Given the unique features of mining LCAs, this Note from the Field presents a common methodology implemented within the Sustainable Aggregates Resource Management (SARMa) Project (www.sarmaproject.eu) in order to boost adoption of LCA in the aggregate industry in South Eastern Europe. The proposed methodology emphasises the importance of resource efficiency and recycling in the context of a Sustainable Supply Mix of aggregates for the construction industry. Through its adoption, aggregate producers, recyclers, and governmental planners would gain confidence with LCA tools and conduct consistent and meaningful life cycle analyses of natural and recycled aggregates. © 2011 Elsevier Ltd. All rights reserved.

A proposed method for evaluating the artisanal production of recycled plastic paving blocks in West Africa

Plastic wastes, and particularly plastic bags and sachets, are a major concern for urban and rural environment in African countries. In the last years some actions have been started for the plastic recycling like the artisanal production of paving blocks with melted plastic bags and sand, albeit with differences in production processes. Nevertheless, the environmental and economic impact of such activities is still to be confirmed. The aim of this study is to propose a methodology for assessing and comparing the environmental and energetic performances of artisanal methods, and for defining the overall quality of the produced blocks. This methodology has been shaped through the analysis of
production processes operated by artisans/small enterprises in West Africa and through physic-mechanical tests on the blocks. A questionnaire which allows an insight into the process and on the product has been developed and tested over five processes. Results show that a high input energy level is observed through all the processes, while considerable savings of energy could be achieved. Moreover, tests results confirmed the importance of the utilised plastic concerning thermal dilatation, mechanical resistance at higher temperature and cooling-shrinkage effects. In conclusion, doubts remain about the technical and environmental effectiveness of the sampled experiences, durability of the products and sustainability of this approach. Nevertheless, being the collection and recycling of plastic wastes a potential income generation activity for marginalised social groups in urban environment, a process optimisation could improve the impact of blocks production. Alternative recycling activities should also be considered.