Polar distribution of ablated atomic material during the pulsed laser deposition of Cu in vacuum: Dependence on focused laser spot size and power density

Experiments have been carried out to investigate the polar distribution of atomic material ablated during the pulsed laser deposition of Cu in vacuum. Data were obtained as functions of focused laser spot size and power density. Thin films were deposited onto flat glass substrates and thickness profiles were transformed into polar atomic flux distributions of the form f(theta)=cos(n) theta. At constant focused laser power density on target, I=4.7+/-0.3X10(8) W/cm(2), polar distributions were found to broaden with a reduction in the focused laser spot size. The polar distribution exponent n varied from 15+/-2 to 7+/-1 for focused laser spot diameter variation from 2.5 to 1.4 mm, respectively, with the laser beam exhibiting a circular aspect on target. With the focused laser spot size held constant at phi=1.8 mm, polar distributions were observed to broaden with a reduction in the focused laser power density on target, with the associated polar distribution exponent n varying from 13+/-1.5 to 8+/-1 for focused laser power density variation from 8.3+/-0.3X10(8) to 2.2+/-0.1X10(8) W/cm(2) respectively. Data were compared with an analytical model available within the literature, which correctly predicts broadening of the polar distribution with a reduction in focused laser spot size and with a reduction in focused laser power density, although the experimentally observed magnitude was greater than that predicted in both cases. (C) 1996 American Institute of Physics.

NUCLEAR STAINING IN ALGAL HERBARIUM MATERIAL - A REAPPRAISAL OF THE HOLOTYPE OF CALLITHAMNION-DECOMPOSITUM AGARDH,J. (RHODOPHYTA)

The taxonomic importance of uninucleate vs. multinucleate vegetative cells in the Ceramiaceae is emphasized. It has been possible to make visible nuclei in old material, including type specimens, using aceto-carmine and aceto-iron-haematoxylin stains. The holotypes of Ceramium roseum and Callithamnion fasciculatum (currently known as Callithamnion roseum and Pleonosporium borreri var. fasciculatum) have uninucleate cells and belong to Aglaothamnion. In contrast, the holotype of Callithamnion decompositum, a name that has been applied to collections of at least two uninucleate taxa, has multinucleate cells; its morphological and cytological details agree with those of specimens collected in France and Ireland that were previously thought to represent an undescribed species. Female reproductive morphology (described from a thallus with gametangia in addition to tetrasporangia), in conjunction with habit and vegetative features, indicates that this species belongs to Compsothamnion (Compsothamnieae), as a third species, being distinguished from C. thuyoides and C. gracillimum by its sessile, lateral tetrasporangia. The required new combinations under Aglaothamnion and Compsothamnion are made.

Challenges of UK/Irish Contractors Regarding Material Management and Logistics in Confined Site Construction

The aim of this paper is to identify the various managerial issues encountered by UK/Irish contractors in the management of materials in confined urban construction sites. Through extensive literature review, detailed interviews, case studies, cognitive mapping, causal loop diagrams, questionnaire survey and documenting severity indices, a comprehensive insight into the materials management concerns within a confined construction site environment is envisaged and portrayed. The leading issues highlighted are: that contractors’ material spatial requirements exceed available space, it is difficult to coordinate the storage of materials in line with the programme, location of the site entrance makes delivery of materials particularly difficult, it is difficult to store materials on-site due to the lack of space, and difficult to coordinate the storage requirements of the various sub-contractors. With the continued development of confined urban centres and the increasing high cost of materials, any marginal savings made on-site would translate into significant monetary savings at project completion. Such savings would give developers a distinct competitive advantage in this challenging economic climate. As on-site management professionals successfully identify, acknowledge and counteract the numerous issues illustrated, the successful management of materials on a confined urban construction site becomes attainable.

Growth Inhibitory Activity of Extracted Material and Isolated Compounds from the Fruits of Kigelia pinnata

A study of the components of the fruits of Kigelia pinnata was undertaken to identify compounds with potential growth inhibitory activity against human melanoma cells, since extracts from the fruits of this plant have been described in traditional medicine to have application in the treatment of skin cancer and other skin ailments. A bioactivity-guided fractionation process yielded a number of crude fractions, which demonstrated cytotoxicity in vitro against human melanoma cells. Compounds isolated and identified included the isocoumarins, demethylkigelin (1) and kigelin 2), fatty acids, oleic (3) and heneicosanoic acids (4), the furonaphthoquinone, 2-(1-hydroxyethyl)-naphtho[2,3-b]furan-4,9-dione (5), and ferulic acid (6). A number of structurally related synthetic compounds were also tested using the MTT assay. The most potent series of these compounds, the furonaphthoquinones, also demonstrated a cytotoxic effect in two human breast cancer cell lines tested.

Variable selection via RIVAL and its application in nuclear material detection

In many situations, the number of data points is fixed, and the asymptotic convergence results of popular model selection tools may not be useful. A new algorithm for model selection, RIVAL (removing irrelevant variables amidst Lasso iterations), is presented and shown to be particularly effective for a large but fixed number of data points. The algorithm is motivated by an application of nuclear material detection where all unknown parameters are to be non-negative. Thus, positive Lasso and its variants are analyzed. Then, RIVAL is proposed and is shown to have some desirable properties, namely the number of data points needed to have convergence is smaller than existing methods.

The use of material flow analysis and the ecological footprint in regional policy-making: application and insights from Northern Ireland.

This paper aims to contribute to the ongoing debate on the use of resource accounting tools in regional policy making. The Northern Limits project applied Material Flow Analysis and Ecological Footprinting to regional policy making in Northern Ireland over a number of years. The early phase of the research informed the regions first sustainable development strategy which was published in 2006 with key targets relating to the Ecological Footprint and improving the resource efficiency of the economy. Phase II identified the next steps required to address data availability and quality and the use of MFA and EF in providing a measurement and monitoring framework for the strategy and in the development of the strategy implementation plan. The use of MFA and Ecological Footprinting in sustainable regional policy making and the monitoring of its implementation is an ongoing process which has raised a number of research issues which can inform the ongoing application and development of these and other resource accounting tools to within Northern Ireland, provide insights for their use in other regions and help set out the priorities for research to support this important policy area.

Minimizing side reactions in chemoenzymatic dynamic kinetic resolution: organometallic and material strategies

Chemoenzymatic dynamic kinetic resolution (DKR) of rac-1-phenyl ethanol into R-1-phenylethanol acetate was investigated with emphasis on the minimization of side reactions. The organometallic hydrogen transfer (racemization) catalyst was varied, and this was observed to alter the rate and extent of oxidation of the alcohol to form ketone side products. The performance of highly active catalyst [(pentamethylcyclopentadienyl) IrCl2(1-benzyl,3-methyl-imidazol-2-ylidene)] was found to depend on the batch of lipase B used. The interaction between the bio- and chemo-catalysts was reduced by employing physical entrapment of the enzyme in silica using a sol-gel process. The nature of the gelation method was found to be important, with an alkaline method preferred, as an acidic method was found to initiate a further side reaction, the acid catalyzed dehydration of the secondary alcohol. The acidic gel was found to be a heterogeneous solid acid.