Collisions Strengths and Effective Collision Strengths for transitions within the ground state configuration of S III

We have carried out a 29-state R-matrix calculation in order to calculate collision strengths and effective collision strengths for the electron impact excitation of S III. The recently developed parallel RMATRX II suite of codes have been used, which perform the calculation in intermediate coupling. Collision strengths have been generated over an electron energy range of 0-12 Ryd, and effective collision strength data have been calculated from these at electron temperatures in the range 1000-100,000 K. Results are here presented for the fine-structure transitions between the ground-state configurations of 3s(2)3p(2) P-3(0,1,2), D-1(2), and S-1(0), and the values given resolve a discrepancy between two previous R-matrix calculations.

z'-band Ground-based Detection of the Secondary Eclipse of WASP-19b

We present the ground-based detection of the secondary eclipse of the transiting exoplanet WASP-19b. The observations were made in the Sloan z' band using the ULTRACAM triple-beam CCD camera mounted on the New Technology Telescope. The measurement shows a 0.088% ± 0.019% eclipse depth, matching previous predictions based on H- and K-band measurements. We discuss in detail our approach to the removal of errors arising due to systematics in the data set, in addition to fitting a model transit to our data. This fit returns an eclipse center, T 0, of 2455578.7676 HJD, consistent with a circular orbit. Our measurement of the secondary eclipse depth is also compared to model atmospheres of WASP-19b and is found to be consistent with previous measurements at longer wavelengths for the model atmospheres we investigated.

Monitoring the performance of aerodrome ground lighting

This article provides an overview of a novel prototype device that can be used to aid airports in monitoring their landing lighting. Known as Aerodrome Ground Lighting (AGL), the device is comprised of a camera that is capable of capturing images of landing lighting as aircraft approach the airport. AGL is designed to automatically examine landing lighting to assess if it is operating under uniform brightness standards (i.e., luminous intensity of luminares) that aviation governing bodies require. A detailed discussion of the hardware and software requirements of AGL -- currently under joint development by researchers at Queens University Belfast and Cobham Flight Inspection Limited -- is presented. Results from the research indicate that assessing the performance of both ground-based runway luminaries and elevated approach luminaries is possible, though further testing is needed for full validation.

Assessing modern ground survey methods and airborne laser scanning for digital terrain modelling:A case study from the Lake District, England

This paper compares the applicability of three ground survey methods for modelling terrain: one man electronic tachymetry (TPS), real time kinematic GPS (GPS), and terrestrial laser scanning (TLS). Vertical accuracy of digital terrain models (DTMs) derived from GPS, TLS and airborne laser scanning (ALS) data is assessed. Point elevations acquired by the four methods represent two sections of a mountainous area in Cumbria, England. They were chosen so that the presence of non-terrain features is constrained to the smallest amount. The vertical accuracy of the DTMs was addressed by subtracting each DTM from TPS point elevations. The error was assessed using exploratory measures including statistics, histograms, and normal probability plots. The results showed that the internal measurement accuracy of TPS, GPS, and TLS was below a centimetre. TPS and GPS can be considered equally applicable alternatives for sampling the terrain in areas accessible on foot. The highest DTM vertical accuracy was achieved with GPS data, both on sloped terrain (RMSE 0.16. m) and flat terrain (RMSE 0.02. m). TLS surveying was the most efficient overall but veracity of terrain representation was subject to dense vegetation cover. Therefore, the DTM accuracy was the lowest for the sloped area with dense bracken (RMSE 0.52. m) although it was the second highest on the flat unobscured terrain (RMSE 0.07. m). ALS data represented the sloped terrain more realistically (RMSE 0.23. m) than the TLS. However, due to a systematic bias identified on the flat terrain the DTM accuracy was the lowest (RMSE 0.29. m) which was above the level stated by the data provider. Error distribution models were more closely approximated by normal distribution defined using median and normalized median absolute deviation which supports the use of the robust measures in DEM error modelling and its propagation. © 2012 Elsevier Ltd.

Preparing the ground for marine spatial planning in Ireland

Marine spatial planning (MSP) is advocated as a means of managing human uses of the sea in a manner that is consistent with the maintenance of the ecological goods and services of the marine environment. The adoption of a system of MSP is seen as urgent in the face of ever-increasing demands on marine resources. This is particularly so in Ireland with its extensive seas, belatedly being recognised as a significant development resource. MSP is promoted by the European Commission (EC) in a recent Green Paper to which Member States of the Union, including Ireland, generally have responded positively. Arising from this consultative process, the EC has published the 'Blue Book' that commits support for MSP. It has also issued guidelines for an integrated approach to maritime policy. The recently adopted EU Marine Strategy Framework Directive strengthens the case for implementing MSP as it requires each Member State to develop a strategy for its marine resources. There is evidence that a diverse range of stakeholders at national and local levels in Ireland are positively disposed toward MSP but no practical manifestation of the concept is in place, though some preparatory work is underway to facilitate its likely implementation into the future. © 2010 WIT Press.

Hyperfine interaction in the ground state of the negatively charged nitrogen vacancy center in diamond

The N-14, N-15, and C-13 hyperfine interactions in the ground state of the negatively charged nitrogen vacancy (NV-) center have been investigated using electron-paramagnetic-resonance spectroscopy. The previously published parameters for the N-14 hyperfine interaction do not produce a satisfactory fit to the experimental NV- electron-paramagnetic-resonance data. The small anisotropic component of the NV- hyperfine interaction can be explained from dipolar interaction between the nitrogen nucleus and the unpaired-electron probability density localized on the three carbon atoms neighboring the vacancy. Optical spin polarization of the NV- ground state was used to enhance the electron-paramagnetic-resonance sensitivity enabling detailed study of the hyperfine interaction with C-13 neighbors. The data confirmed the identification of three equivalent carbon nearest neighbors but indicated the next largest C-13 interaction is with six, rather than as previously assumed three, equivalent neighboring carbon atoms.

Reaching common ground:A patient-family-based conceptual framework of quality EOL care

Improvement in the quality of end-of-life (EOL) care is a priority health care issue since serious deficiencies in quality of care have been reported across care settings. Increasing pressure is now focused on Canadian health care organizations to be accountable for the quality of palliative and EOL care delivered. Numerous domains of quality EOL care upon which to create accountability frameworks are now published, with some derived from the patient/family perspective. There is a need to reach common ground on the domains of quality EOL care valued by patients and families in order to develop consistent performance measures and set priorities for health care improvement. This paper describes a meta-synthesis study to develop a common conceptual framework of quality EOL care integrating attributes of quality valued by patients and their families. © 2005 Centre for Bioethics, IRCM.

Shifting Ground:Beyond National Architecture

The Irish Pavilion at the Venice Architecture Biennale 2012 charts a position for Irish architecture in a global culture where the modes of production of architecture are radically altered. Ireland is one of the most globalised countries in the world, yet it has developed a national culture of architecture derived from local place as a material construct. We now have to evolve our understanding in the light of the globalised nature of economic processes and architectural production which is largely dependent on internationally networked flows of products, data, and knowledge. We have just begun to represent this situation to ourselves and others. How should a global architecture be grounded culturally and philosophically? How does it position itself outside of shared national reference points?
heneghan peng architects were selected as participants because they are working across three continents on a range of competition-winning projects. Several of these are in sensitive and/or symbolic sites that include three UNESCO World Heritage sites, including the Grand Egyptian Museum in Cairo, the Giants Causeway Visitor Centre in Northern Ireland, and the new Rhine Bridge near Lorelei.
Our dialogue led us to discussing the universal languages of projective geometry and number are been shared by architects and related professionals. In the work of heneghan peng, the specific embodiment of these geometries is carefully calibrated by the choice of materials and the detailed design of their physical performance on site. The stone facade of the Giant’s Causeway Visitor Centre takes precise measure of the properties of the volcanic basalt seams from which it is hewn. The extraction of the stone is the subject of the pavilion wall drawings which record the cutting of stones to create the façade of the causeway centre.
We also identified water as an element which is shared across the different sites. Venice is a perfect place to take measure of this element which suggests links to another site – the Nile Valley which was enriched by the annual flooding of the River Nile. An ancient Egyptian rod for measuring the water level of the Nile inspired the design of the Nilometre - a responsive oscillating bench that invites visitors to balance their respective weights. This action embodies the ways of thinking that are evolving to operate in the globalised world, where the autonomous architectural object is dissolving into an expanded field of conceptual rules and systems. The bench constitutes a shifting ground located in the unstable field of Venice. It is about measurement and calibration of the weight of the body in relation to other bodies; in relation to the site of the installation; and in relation to water. The exhibit is located in the Artiglierie section of the Arsenale. Its level is calibrated against the mark of the acqua alta in the adjacent brickwork of the building which embodies a liminal moment in the fluctuating level of the lagoon.
The weights of bodies, the level of water, changes over time, are constant aspects of design across cultures and collectively they constitute a common ground for architecture - a ground shared with other design professionals. The movement of the bench required complex engineering design and active collaboration between the architects, engineers and fabricators. It is a kind of prototype – a physical object produced from digital data that explores the mathematics at play – the see-saw motion invites the observer to become a participant, to give it a test drive. It shows how a simple principle can generate complex effects that are difficult to predict and invites visitors to experiment and play with them.