EFFECTS OF 3 DURABILITY ENHANCING PRODUCTS ON SOME PHYSICAL-PROPERTIES OF NEAR-SURFACE CONCRETE

This paper investigates the influence of three fundamentally different durability enhancing products, viz. microsilica, controlled permeability formwork and silane, on some of the physical proper ties of near surface concrete. Microsilica (silica fume) is a pozzolan, controlled permeability formwork (CPF) is used to provide a free draining surface to a concrete form, while silane is a surface treatment applied to hardened concrete to reduce the ingress of water. Comparisons are made between the products when used individually and used in conjunction with each other, with a view to assessing whether the use of combinations of products may be desirable to improve the durability of concrete in certain circumstances. The effect of these materials on various durability parameters, such as freeze-thaw deterioration, carbonation resistance and chloride ingress, is considered in terms of their effect on permeation properties and surface strength. The results indicated that a combination of silane and CPF produces concrete with very low air permeability and sorptivity values. The influence of microsilica was more pronounced in increasing the surface strength of concrete.

Use of recycled demolition aggregate in precast products, phase II: Concrete paving blocks

A study undertaken at the University of Liverpool has investigated the potential for using construction and demolition waste (C&DW) as aggregate in the manufacture of a range of precast concrete products, i.e. building and paving blocks and pavement flags. Phase II, which is reported here, investigated concrete paving blocks. Recycled demolition aggregate can be used to replace newly quarried limestone aggregate, usually used in coarse (6 mm) and fine (4 mm-to-dust) gradings. The first objective, as was the case with concrete building blocks, was to replicate the process used by industry in fabricating concrete paving blocks in the laboratory. The compaction technique used involved vibration and pressure at the same time, i.e. a vibro-compaction technique. An electric hammer used previously for building blocks was not sufficient for adequate compaction of paving blocks. Adequate compaction could only be achieved by using the electric hammer while the specimens were on a vibrating table. The experimental work involved two main series of tests, i.e. paving blocks made with concrete- and masonry-derived aggregate. Variables that were investigated were level of replacement of (a) coarse aggregate only, (b) fine aggregate only, and (c) both coarse and fine aggregate. Investigation of mechanical properties, i.e. compressive and tensile splitting strength, of paving blocks made with recycled demolition aggregate determined levels of replacement which produced similar mechanical properties to paving blocks made with newly quarried aggregates. This had to be achieved without an increase in the cement content. The results from this research programme indicate that recycled demolition aggregate can be used for this new higher value market and therefore may encourage demolition contractors to develop crushing and screening facilities for this. (C) 2011 Published by Elsevier Ltd.

Do Foreign Greenfields Outperform Foreign Acquisitions or Vice Versa? An Institutional Perspective.

Prior studies of the comparative performance of greenfields and acquisitions have advanced competing arguments, with some arguing that greenfields should outperform acquisitions because acquisitions are costlier to integrate, and others that acquisitions should outperform greenfields because greenfields suffer from a liability of newness. Moreover, while the costs of integration and the liability of newness are at their greatest during a subsidiary's first years, prior studies have tested their competing arguments on samples containing older subsidiaries. We extend these prior studies by (1) developing an institutional theory-based framework that simultaneously considers the costs of integration and the liability of newness, (2) recognizing that both types of costs vary with the level of subsidiary integration, and (3) focusing on the stage of their life during which subsidiaries predominantly incur these costs. To measure subsidiary performance, we ask managers of Dutch multinationals how their ex ante performance expectations compare to the subsidiary's ex post performance during its first two years. Analysing a sample of 191 foreign subsidiaries and controlling for entry mode self-selection and other factors, we find that acquisitions outperform greenfields at low and intermediate levels of subsidiary integration, but that greenfields outperform acquisitions at higher integration levels. [ABSTRACT FROM AUTHOR]