Techniques and tools for parallelizing software

With the emergence of multicore and manycore processors, engineers must design and develop software in drastically new ways to benefit from the computational power of all cores. However, developing parallel software is much harder than sequential software because parallelism can't be abstracted away easily. Authors Hans Vandierendonck and Tom Mens provide an overview of technologies and tools to support developers in this complex and error-prone task. © 2012 IEEE.

Influence of the Pacific Decadal Oscillation, El Niño-Southern Oscillation and solar forcing on climate and primary productivity changes in the northeast Pacific

Evidence of 11-year Schwabe solar sunspot cycles, El Niño-Southern Oscillation (ENSO) and the Pacific Decadal Oscillation (PDO) were detected in an annual record of diatomaceous laminated sediments from anoxic Effingham Inlet, Vancouver Island, British Columbia. Radiometric dating and counting of annual varves dates the sediments from AD 1947-1993. Intact sediment slabs were X-rayed for sediment structure (lamina thickness and composition based on gray-scale), and subsamples were examined for diatom abundances and for grain size. Wavelet analysis reveals the presence of ~2-3, ~4.5, ~7 and ~9-12-year cycles in the diatom record and an w11e13 year record in the sedimentary varve thickness record. These cycle lengths suggest that both ENSO and the sunspot cycle had an influence on primary productivity and sedimentation patterns. Sediment grain size could not be correlated to the sunspot cycle although a peak in the grain size data centered around the mid-1970s may be related to the 1976-1977 Pacific climate shift, which occurred when the PDO index shifted from negative (cool conditions) to positive (warm conditions). Additional evidence of the PDO regime shift is found in wavelet and cross-wavelet results for Skeletonema costatum, a weakly silicified variant of S. costatum, annual precipitation and April to June precipitation. Higher spring (April/May) values of the North Pacific High pressure index during sunspot minima suggest that during this time, increased cloud cover and concomitant suppression of the Aleutian Low (AL) pressure system led to strengthened coastal upwelling and enhanced diatom production earlier in the year. These results suggest that the 11-year solar cycle, amplified by cloud cover and upwelling changes, as well as ENSO, exert significant influence on marine primary productivity in the northeast Pacific. The expression of these cyclic phenomena in the sedimentary record were in turn modulated by the phase of PDO, as indicated by the change in period of ENSO and suppression of the solar signal in the record after the 1976-1977 regime shift. © 2013 Elsevier Ltd and INQUA. All rights reserved.

JISC Workshop Report: E-Research Resources, Tools and Methods for Historic Place Name Analysis

A substantial amount of the 'critical mass' of digital data available to scholarship contains place-names, and it is now recognised that spatial and temporal data points, including place-names, are a vital part of the e-research infrastructure that supports the use, re-use and advanced analysis of data using ICT tools and methods. Place-names can also be linked semantically to contribute to the web of data, and to enrich content through linking existing data, and identifying new collections for digitization to strategically enhance existing digital collections. However, existing e-projects rely on modern gazetteers limiting them to the modern and the near-contemporary. This workshop explored how to further integrate the wealth of historical place-name scholarship, and the resulting digital resources generated within UK academia, so enabling integration of local knowledge over much longer periods.

Accessibility and Health: Towards Walkability Tools for Planning Practice

There is increasing research interest in how we can most effectively intervene in the built environment to change behaviours such as physical activity and improve health. Much of this work has focussed around the concept of walkability and the identification of those attributes of our cities that encourage pedestrian activity, including density, connectivity and the aesthetic of the urban realm (Saelens et al 2003, Frank et al 2010). Much of the existing research has clarified the strength of the relationships between various environmental attributes and the differential impact on different demographic groups (e.g. Panter et al 2011). This has not yet been effectively translated into tools to help integrate the concepts of walkability into decision-making by statutory authorities that can help shape the spatial development and delivery of public services which can support more active lifestyles. A key reason for this has been that standard models for transport planning and accessibility are based on networks of road infrastructure, which provides a weak basis for modelling pedestrian accessibility (Chin et al 2008).

This paper reports the findings of Knowledge Exchange project funded by UK’s Economic and Social Research Council (ES/J010588/1) and partners including Belfast and Derry City Councils and Northern Ireland’s Public Health Agency, the Department of Regional Development and Belfast Healthy Cities, that has attempted to address this problem. This project has mapped city-wide footpath networks and used these to assist partner organisations in developing the evidence base for making decisions on public services based on health impacts and pedestrian access. The paper describes the tool developed, uses a number of examples to highlight its impact on areas of decision-making and evaluates the benefits of further integrating walkability into planning and development practice.

Using Mesh-Geometry Relationships to Transfer Analysis Models between CAE Tools

Integrating analysis and design models is a complex task due to differences between the models and the architectures of the toolsets used to create them. This complexity is increased with the use of many different tools for specific tasks during an analysis process. In this work various design and analysis models are linked throughout the design lifecycle, allowing them to be moved between packages in a way not currently available. Three technologies named Cellular Modeling, Virtual Topology and Equivalencing are combined to demonstrate how different finite element meshes generated on abstract analysis geometries can be linked to their original geometry. Establishing the equivalence relationships between models enables analysts to utilize multiple packages for specialist tasks without worrying about compatibility issues or rework.

Confined Site Construction and its Impact on Personnel Productivity

Inner city, confined site construction is quickly becoming the norm within the construction sector. The aim of this paper is to identify and document the effect, if any, that a confined construction site environment has on the productivity of on-site personnel. In order to compile the relevant information and attain appropriate results on the matter in question, a qualitative analytical approach is adopted. This process incorporates multiple cases studies from Ireland, Northern Ireland and USA. From the resulting case studies, a minimum of three individual interviews and focus group seminars are conducted to aid in the collection of the data while also assisting in the confirmation of the factors identified from a critique of the relevant literature. From the resulting case studies and discussions, a list of the key issues pertaining to the on-site productivity of personnel emerged and is documented as follows; 1) Overcrowding of personnel at workstations, 2) Lack of space for the effective movement of personnel on-site, 3) Numerous trades working within the one space on-site. Through identifying the issues highlighted and proactively mitigating or eliminating the factors detailed, on-site management professionals can strive to ensure maximum productivity from the industry’s most important resource – people.

Experimental and numerical studies on rock breaking with TBM tools under high stress confinement

The understanding of rock breaking and chipping due to the TBM cutter disks mechanism in deep tunnels is considered in this paper. The interest stems from the use of TBMs for the excavation of long Trans-Alpine tunnels. Some tests that simulate the disk cutter action at the tunnel face by means of an indenter, acting on a rock specimen are proposed. The rock specimen is confined through a flat-jack and a confinement-free area on one side of the specimen simulates the formation of a groove near the indenter, like it occurs in TBM excavation conditions. Results show a limited influence of the confinement stress versus the thrust increment required for breaking the rock between the indenter and the free side of the specimen. Numerical modelling of the cutter disk action on confined material has also been carried out in order to investigate further aspects of the fracture initiation. Also in this case the importance of the relative position between disk cutter and groove is pointed out. © 2006 Springer-Verlag.

Delamination and wear in drilling of carbon-fiber reinforced plastic composites using multilayer TiAlN/TiN PVD-coated tungsten carbide tools

This study aims to investigate drilling process in carbon-fiber reinforced plastic (CFRP) composites with multilayer TiAlN/TiN PVD-coated tungsten carbide drill. The effect of process parameters have been investigated in drilling of Hexcel M21-T700GC. Thrust force and torque were measured online throughout the drilling experiments. Delamination were observed using optical microscope and analyzed via a developed algorithm based on digital image processing technique. Surface roughness of each hole was measured using a surface profilometer. In addition, the progression of tool wear in various surfaces of drill was observed using tool microscope and measured using image software. Our results indicate that the thrust force and torque increased with the increasing cutting speed and feed rate. Delamination and average surface roughness that rose with the increase in feed rate, however, decreased with the increasing cutting speed. The average surface roughness tended to increase with the increase in feed rate and decrease with the increasing cutting speed in drilling of carbon-fiber reinforced plastic (CFRP). Feed rate was found as the predominant factor on the drilling outputs. Abrasive wear was observed on both flank and relief surfaces, which created edge wear on cutting edges. No sign of chipping or plastic deformation has been observed on the surfaces of drills. © 2012 The Author(s).

Brunetta’s reform swan song? An assessment of its success in local governments through the analysis of its tools

The work aims at assessing the success of Brunetta’s reform (Legislative Decree n. 150/2009), a far-reaching reform that aimed at improving both organizational and individual performance in Italian public administration through a specific planning and control process (the performance cycle) and most of all through two new tools, Performance Plan and Performance Report. The success of the reform is assessed, with particular emphasis on local governments, analyzing the diffusion and use of these new tools. The study has been conducted using a deductive-inductive methodology. Thus, after a study of managerial reforms in Italy and performance measurement literature, a possible model (PerformEL Model) local governments could follow to draw up Performance Plan and Report as effective tools for performance measurement has been designed (deductive phase). Performance Plans 2011-2013 and Performance Report 2011 downloaded from Italian big sized municipalities’ websites have been analyzed in the light of PerformEL Model, to assess the diffusion of the documents and their coherence with legal requirements and suggestions from literature (inductive phase). Data arising from the empirical analysis have been studied to evaluate the diffusion and the effectiveness of big sized municipalities’ Performance Plans and Reports as performance measurement tools and thus to assess the success of the reform (feedback phase). The study shows a scarce diffusion of the documents; they are mostly drew up because of their compulsoriness or to gain legitimization. The results testify the failure of Brunetta’s reform, at least with regard to local governments.

Tools for Finding Inconsistencies in Real-world Logic-based Systems

Currently there is extensive theoretical work on inconsistencies in logic-based systems. Recently, algorithms for identifying inconsistent clauses in a single conjunctive formula have demonstrated that practical application of this work is possible. However, these algorithms have not been extended for full knowledge base systems and have not been applied to real-world knowledge. To address these issues, we propose a new algorithm for finding the inconsistencies in a knowledge base using existing algorithms for finding inconsistent clauses in a formula. An implementation of this algorithm is then presented as an automated tool for finding inconsistencies in a knowledge base and measuring the inconsistency of formulae. Finally, we look at a case study of a network security rule set for exploit detection (QRadar) and suggest how these automated tools can be applied.