100 resultados para Pareto solutions
Resumo:
The ability of building information modeling (BIM) to positively impact projects in the AEC through greater collaboration and integration is widely acknowledged. This paper aims to examine the development of BIM and how it can contribute to the cold-formed steel (CFS) building industry. This is achieved through the adoption of a qualitative methodology encompassing a literature review, exploratory interviews with industry experts, culminating in the development of e-learning material for the sector. In doing so, the research team have collaborated with one of the United Kingdom’s largest cold-formed steel designer/fabricators. By demonstrating the capabilities of BIM software and providing technical and informative videos in its creation, this project has found two key outcomes. Firstly, to provide invaluable assistance in the transition from traditional processes to a fully collaborative 3D BIM as required by the UK Government under the “Government Construction Strategy” by 2016 in all public sector projects. Secondly, to demonstrate BIM’s potential not only within CFS companies, but also within the AEC sector as a whole. As the flexibility, adaptability and interoperability of BIM software is alluded to, the results indicate that the introduction and development of BIM and the underlying ethos suggests that it is a key tool in the development of the industry as a whole.
Resumo:
Daily and seasonal variations in physiological characteristics of mammals can be considered adaptations to temporal habitat variables. Across different ecosystems, physiological adjustments are expected to be sensitive to different environmental signals such as changes in photoperiod, temperature or water and food availability; the relative importance of a particular signal being dependent on the ecosystem in question. Energy intake, oxygen consumption (VO) and body temperature (T) daily rhythms were compared between two populations of the broad-toothed field mouse Apodemus mystacinus, one from a Mediterranean and another from a sub-Alpine ecosystem. Mice were acclimated to short-day (SD) 'winter' and long-day (LD) 'summer' photoperiods under different levels of salinity simulating osmotic challenges. Mediterranean mice had higher VO values than sub-Alpine mice. In addition, mice exposed to short days had higher VO values when given water with a high salinity compared with mice exposed to long days. By comparison, across both populations, increasing salinity resulted in a decreased T in SD- but not in LD-mice. Thus, SD-mice may conserve energy by decreasing T during ('winter') conditions which are expected to be cool, whereas LD-mice might do the opposite and maintain a higher T during ('summer') conditions which are expected to be warm. LD-mice behaved to reduce energy expenditure, which might be considered a useful trait during 'summer' conditions. Overall, increasing salinity was a clear signal for Mediterranean-mice with resultant effects on VO and T daily rhythms but had less of an effect on sub-Alpine mice, which were more responsive to changes in photoperiod. Results provide an insight into how different populations respond physiologically to various environmental challenges.
Resumo:
Background: There is an urgent need to increase population levels of physical activity, particularly amongst those who are socio-economically disadvantaged. Multiple factors influence physical activity behaviour but the generalisability of current evidence to such ‘hard-to-reach’ population subgroups is limited by difficulties in recruiting them into studies. Also, rigorous qualitative studies of lay perceptions and perceptions of community leaders about public health efforts to increase physical activity are sparse. We sought to explore, within a socio-economically disadvantaged community, residents’ and community leaders’ perceptions of physical activity (PA) interventions and issues regarding their implementation, in order to improve understanding of needs, expectations, and social/environmental factors relevant to future interventions.
Methods: Within an ongoing regeneration project (Connswater Community Greenway), in a socio-economically disadvantaged community in Belfast, we collaborated with a Community Development Agency to purposively sample leaders from public- and voluntary-sector community groups and residents. Individual semi-structured interviews were conducted with 12 leaders. Residents (n=113), of both genders and a range of ages (14 to 86 years) participated in focus groups (n=14) in local facilities. Interviews and focus groups were recorded, transcribed verbatim and analysed using a thematic framework.
Results: Three main themes were identified: awareness of PA interventions; factors contributing to intervention effectiveness; and barriers to participation in PA interventions. Participants reported awareness only of interventions in which they were involved directly, highlighting a need for better communications, both inter- and intra-sectoral, and with residents. Meaningful engagement of residents in planning/organisation, tailoring to local context, supporting volunteers, providing relevant resources and an ‘exit strategy’ were perceived as important factors related to intervention effectiveness. Negative attitudes such as apathy, disappointing experiences, information with no perceived personal relevance and limited access to facilities were barriers to people participating in interventions.
Conclusions: These findings illustrate the complexity of influences on a community’s participation in PA interventions and support a social-ecological approach to promoting PA. They highlight the need for cross-sector working, effective information exchange, involving residents in bottom-up planning and providing adequate financial and social support. An in-depth understanding of a target population’s perspectives is of key importance in translating PA behaviour change theories into practice.
Resumo:
With most recent studies being focused on the development of
advanced chemical adsorbents, this paper investigates the possibility of
using two natural low-cost materials for selective adsorption. Multiadsorbent
systems containing tea waste and dolomite have been tested for
their effectiveness in the removal of copper and methylene blue from
aqueous solutions. The effects of contact time, solution pH and
adsorption isotherms on the sorption behaviour were investigated. The
Langmuir and Freundlich isotherms adequately described the adsorption of
copper ions and methylene blue by both materials in different systems.
The highest adsorption capacities for Cu and MB were calculated as 237.7
at pH 4.5 and 150.44 mg.g‒1 at pH 7 for DO and TW+DO respectively. Tea
waste (TW) and dolomite (DO) were characterized by Fourier transform
infrared spectroscopy, scanning electron microscopy and Energy dispersive
X-ray analysis. The removal of Cu and MB by dolomite was mainly via
surface complexation while physisorption was responsible for most of the
Cu and MB adsorption onto tea waste. Identifying the fundamental mechanisms and behaviour is key to the development of practical multi-adsorbent packed columns.
Resumo:
The study explores the application of a two-stage electrokinetic washing system on remediation of lead (Pb) contaminated soil. The process involved an initial soil washing, followed by an electrokinetic process. The use of electrokinetic process in soil washing not only provided additional driving force for transporting the desorbed Pb away from the soil but also reduced the high usage of wash solution. In this study, the effect of NaNO3, HNO3, citric acid and EDTA as wash solutions on two-stage electrokinetic washing system were evaluated. The results revealed that a two-stage electrokinetic washing process enhanced Pb removal efficiency by 2.52-9.08% and 4.98-20.45% in comparison to a normal electrokinetic process and normal washing process, respectively. Low pH and adequate current were the most important criteria in the removal process as they provided superior desorption and transport properties. The effect of chelating by EDTA was less dominant as it delayed the removal process by forming a transport loop in anode region between Pb ion and complexes. HNO3 was not suitable as wash solution in electrokinetic washing in spite of offering highest removal efficiency as it caused pH fluctuation in the cathode chamber, corroded graphite anode and showed high power consumption. In contrast, citric acid not only yielded high Pb removal efficiency with low power consumption but also maintained a low soil: solution ratio of 1 g: <1 mL, stable pH and electrode integrity. Possible transport mechanisms for Pb under each wash solution are also discussed in this work.
Resumo:
BACKGROUND: Dementia is a significant worldwide health issue, however, it is often insidious in onset and difficult to diagnose, therefore GPs have expressed a limited confidence in their diagnostic skills, extending into their prognostication of the disease. As a result diagnosing the terminal phase of dementia has been identified as a significant challenge to delivering effective palliative care. Therefore, identifying the challenges faced by the GPs in this field will help to guide their training and support, and as a result could assist in the provision of sustained and effective palliative care for their dementia patients.
Resumo:
Hydrous cerium oxide (HCO) was synthesized by intercalation of solutions of cerium(III) nitrate and sodium hydroxide and evaluated as an adsorbent for the removal of hexavalent chromium from aqueous solutions. Simple batch experiments and a 25 factorial experimental design were employed to screen the variables affecting Cr(VI) removal efficiency. The effects of the process variables; solution pH, initial Cr(VI) concentration, temperature, adsorbent dose and ionic strength were examined. Using the experimental results, a linear mathematical model representing the influence of the different variables and their interactions was obtained. Analysis of variance (ANOVA) demonstrated that Cr(VI) adsorption significantly increases with decreased solution pH, initial concentration and amount of adsorbent used (dose), but slightly decreased with an increase in temperature and ionic strength. The optimization study indicates 99% as the maximum removal at pH 2, 20 °C, 1.923 mM of metal concentration and a sorbent dose of 4 g/dm3. At these optimal conditions, Langmuir, Freundlich and Redlich–Peterson isotherm models were obtained. The maximum adsorption capacity of Cr(VI) adsorbed by HCO was 0.828 mmol/g, calculated by the Langmuir isotherm model. Desorption of chromium indicated that the HCO adsorbent can be regenerated using NaOH solution 0.1 M (up to 85%). The adsorption interactions between the surface sites of HCO and the Cr(VI) ions were found to be a combined effect of both anion exchange and surface complexation with the formation of an inner-sphere complex.
Resumo:
The absolute yield of hydroxyl radicals per unit of deposited X-ray energy is determined for the first time for irradiated aqueous solutions containing metal nanoparticles based on a “reference” protocol. Measurements are made as a function of dose rate and nanoparticle concentration. Possible mechanisms for hydroxyl radical production are considered in turn: energy deposition in the nanoparticles followed by its transport into the surrounding environment is unable to account for observed yield whereas energy deposition in the water followed by a catalytic-like reaction at the water-nanoparticle interface can account for the total yield and its dependence on dose rate and nanoparticle concentration. This finding is important because current models used to account for nanoparticle enhancement to radiobiological damage only consider the primary interaction with the nanoparticle, not with the surrounding media. Nothing about the new mechanism appears to be specific to gold, the main requirements being the formation of a structured water layer in the vicinity of the nanoparticle possibly through the interaction of its charge and the water dipoles. The massive hydroxyl radical production is relevant to a number of application fields, particularly nanomedicine since the hydroxyl radical is responsible for the majority of radiation-induced DNA damage.
Resumo:
The historic significance of the Good Friday Agreement and its role in ending organized political violence is acknowledged at the outset. The article then goes on to probe the roots of the political paralysis built into the architecture of the Agreement that are predicated on a misplaced political and cultural symmetry between the “two communities.” It is suggested that the institutionalized relationship between Northern Ireland and the rest of the U.K. facilitates a cross-party, populist, socio-economic consensus among the nationalist and unionist political parties on the welfare state, taxation and maintaining the massive British subvention to the region. This in turn allows them to concentrate on a divisive culturalist politics, i.e., on antagonistic forms of cultural and identity politics over such issues as flags, parades, and the legacy of the “Troubles” which spills over into gridlock into many areas of regional administration. The article argues for a much broader understanding of culture and identity rooted in the different, if overlapping and interdependent, material realities of both communities while challenging the idea of two cultures/identities as fixed, mutually exclusive, non-negotiable and mutually antagonistic. It then focuses on the importance of Belfast as a key arena which will determine the long-term prospects of an alternative and more constructive form of politics, and enable a fuller recognition of the fundamental asymmetries and inter-dependence between the “two communities.” In the long run, this involves re-defining and reconstructing what is meant by the “Union” and a “United Ireland.”
Resumo:
Introduction
As general practice (GP) is the main source of referrals to neurologists, neurology education for GP trainees is important. We investigated the existence of neurophobia, contributing factors and potential prevention strategies among GP trainees.
MethodsIn a questionnaire survey interest, knowledge, confidence and perceived difficulty in neurology were compared with different medical specialties. Reasons for difficulty with neurology, postgraduate neurology education experience, learning methods and suggested teaching improvements were examined.
ResultsOf 205 GP trainees, 118 (58%) completed the questionnaire. Threshold analyses justified categorical intervals for the Likert responses. Trainees recorded poorer knowledge (p < 0.001), less confidence (p < 0.001) and more perceived difficulty (p < 0.001) with neurology than with any other medical specialty. GP trainees had less interest in neurology than any other medical specialty (Duncan test, p < 0.001). There was a similar gradation in difficulty and confidence perception across medical specialties. Hospital and community-based neurology teaching was graded as “poor” or “very poor” by over 60% of GP trainees. There were multiple perceived causes of neurophobia, including neuroanatomy and poor quality teaching. More organised clinical teaching and referral guidance were suggested to address GP neurophobia.
ConclusionsNeurophobia is common among GP trainees in Northern Ireland. GP trainees have clear and largely uniform ideas on improving their neurology education. GP training posts should reflect the importance of neurology within the GP curriculum.
Resumo:
Insulated-gate bipolar transistor (IGBT) power modules find widespread use in numerous power conversion applications where their reliability is of significant concern. Standard IGBT modules are fabricated for general-purpose applications while little has been designed for bespoke applications. However, conventional design of IGBTs can be improved by the multiobjective optimization technique. This paper proposes a novel design method to consider die-attachment solder failures induced by short power cycling and baseplate solder fatigue induced by the thermal cycling which are among major failure mechanisms of IGBTs. Thermal resistance is calculated analytically and the plastic work design is obtained with a high-fidelity finite-element model, which has been validated experimentally. The objective of minimizing the plastic work and constrain functions is formulated by the surrogate model. The nondominated sorting genetic algorithm-II is used to search for the Pareto-optimal solutions and the best design. The result of this combination generates an effective approach to optimize the physical structure of power electronic modules, taking account of historical environmental and operational conditions in the field.
Resumo:
The general practitioner (GP) is in a pivotal position to initiate and adapt care for their patients living with dementia. This study aimed to elicit GPs' perceptions of the potential barriers and solutions to the provision of good-quality palliative care in dementia in their practices. A postal survey of GPs across Northern Ireland was conducted with open-ended items soliciting for barriers in their practices and possible solutions; 40.6% (138/340) were returned completed. Barriers to palliative care in dementia were perceived to be a dementia knowledge deficit for healthcare staff and the public, a resource shortfall within the GP practice and community, poor team coordination alongside inappropriate dementia care provision, and disagreements from and within families. These findings have significant implications for educators and clinicians as enhanced dementia education and training were highlighted as a strong agenda for GPs with the suggestions of dementia awareness programmes for the public.
Resumo:
Herein, we report the densities and speeds of sound in binary mixtures of three hydrophobic and one hydrophilic ionic liquids: 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide, [C4mim][NTf2], 1-butyl-1-methylpyrrolidinium bis[(trifluoromethyl)sulfonyl]imide, [C4mpyr][NTf2], 1-propyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide, [C3mim][NTf2] and 1-ethyl-3-methylimidazolium thiocyanate, [C2mim][SCN], with water at 298.15 K and 0.1 MPa. The concentration range of water, which encompassed relatively small values well below the saturation point, is often regarded as an impurity for hydrophobic ionic liquids. On the basis of experimental results the molar volume, adiabatic molar compressibility, partial molar volume and apparent molar volume, as well as, partial molar and apparent molar isentropic compressibility properties were then calculated. Interesting results are obtained using the solutions based on the hydrophilic [C2mim][SCN], since these mixtures are characterized by relatively low density and high values of speed of sound. Furthermore, the partial molar volumes and partial molar adiabatic compressibilities of water in solution with [C2mim][SCN] are the lowest among the investigated in mixtures with ionic liquids. However, in the case of the hydrophobic ionic liquid solutions, only small differences are observed for molar adiabatic compressibilities with the change of the cation structure, i.e. for water + [C4mim][NTf2] or + [C4mpyr][NTf2]. A more pronounced difference has been observed for the partial molar compressibility of water in solutions with these two ionic liquids.
Resumo:
Ceria (CeO2) and ceria-based composite materials, especially Ce1-xZrxO2 solid solutions, possess a wide range of applications in many important catalytic processes, such as three-way catalysts, owing to their excellent oxygen storage capacity (OSC) through the oxygen vacancy formation and refilling. Much of this activity has focused on the understanding of the electronic and structural properties of defective CeO2 with and without doping, and comprehending the determining factor for oxygen vacancy formation and the rule to tune the formation energy by doping has constituted a central issue in material chemistry related to ceria. However, the calculation on electronic structures and the corresponding relaxation patterns in defective CeO2-x oxides remains at present a challenge in the DFT framework. A pragmatic approach based on density functional theory with the inclusion of on-site Coulomb correction, i.e. the so-called DFT + U technique, has been extensively applied in the majority of recent theoretical investigations. Firstly, we review briefly the latest electronic structure calculations of defective CeO2(111), focusing on the phenomenon of multiple configurations of the localized 4f electrons, as well as the discussions of its formation mechanism and the catalytic role in activating the O-2 molecule. Secondly, aiming at shedding light on the doping effect on tuning the oxygen vacancy formation in ceria-based solid solutions, we summarize the recent theoretical results of Ce1-xZrxO2 solid solutions in terms of the effect of dopant concentrations and crystal phases. A general model on O vacancy formation is also discussed; it consists of electrostatic and structural relaxation terms, and the vital role of the later is emphasized. Particularly, we discuss the crucial role of the localized structural relaxation patterns in determining the superb oxygen storage capacity in kappa-phase Ce1-xZr1-xO2. Thirdly, we briefly discuss some interesting findings for the oxygen vacancy formation in pure ceria nanoparticles (NPs) uncovered by DFT calculations and compare those with the bulk or extended surfaces of ceria as well as different particle sizes, emphasizing the role of the electrostatic field in determining the O vacancy formation.