Optimising the locations of thermally sensitive equipment in an aircraft crown compartment

A Design of Experiments (DoE) analysis was undertaken to generate a list of configurations for CFD numerical simulation of an aircraft crown compartment. Fitted regression models were built to predict the convective heat transfer coefficients of thermally sensitive dissipating elements located inside this compartment. These are namely the SEPDC and the Route G. Currently they are positioned close to the fuselage and it is of interest to optimise the heat transfer for reliability and performance purposes. Their locations and the external fuselage surface temperature were selected as input variables for the DoE. The models fit the CFD data with values ranging from 0.878 to 0.978, and predict that the optimum locations in terms of heat transfer are when the elements are positioned as close to the crown floor as possible ( and ?min. limits), where they come in direct contact with the air flow from the cabin ventilation system, and when they are positioned close to the centreline ( and ?CL). The methodology employed allows aircraft thermal designers to optimise equipment placement in confined areas of an aircraft during the design phase. The determined models should be incorporated into global aircraft numerical models to improve accuracy and reduce model size and computational time. © 2012 Elsevier Masson SAS. All rights reserved.

Bogeymen, lunatics and fanatics: collective actions and the private enforcement of European competition law

The European desire to ensure that bearers of EU rights are adequately compensated for any infringement of these rights, particularly in cases where the harm is widely diffused, and perhaps not even noticed by those affected by it, collides with another desire: to avoid the perceived excesses of an American-style system of class actions. The excesses of these American class actions are in European discourse presented as a sort of bogeyman, which is a source of irrational fear, often presented by parental or other authority figures. But when looked at critically, the bogeyman disappears. In this paper, I examine the European (and UK) proposals for collective action. I compare them to the American regime. The flaws and purported excesses of the American regime, I argue, are exaggerated. A close, objective examination of the American regime shows this. I conclude that it is not the mythical bogeyman of a US class action that is the barrier to effective collective redress; rather, the barriers to effective, wide-ranging group actions lie within European legal culture and traditions, particularly those mandating individual control over litigation.

Effect of the crown design and interface lute parameters on the stress-state of a machined crown-tooth system: A finite element analysis

The effect of preparation design and the physical properties of the interface lute on the restored machined ceramic crown-tooth complex are poorly understood. The aim of this work was to determine, by means of three-dimensional finite element analysis (3D FEA) the effect of the tooth preparation design and the elastic modulus of the cement on the stress state of the cemented machined ceramic crown-tooth complex. The three-dimensional structure of human premolar teeth, restored with adhesively cemented machined ceramic crowns, was digitized with a micro-CT scanner. An accurate, high resolution, digital replica model of a restored tooth was created. Two preparation designs, with different occlusal morphologies, were modeled with cements of 3 different elastic moduli. Interactive medical image processing software (mimics and professional CAD modeling software) was used to create sophisticated digital models that included the supporting structures; periodontal ligament and alveolar bone. The generated models were imported into an FEA software program (hypermesh version 10.0, Altair Engineering Inc.) with all degrees of freedom constrained at the outer surface of the supporting cortical bone of the crown-tooth complex. Five different elastic moduli values were given to the adhesive cement interface 1.8 GPa, 4 GPa, 8 GPa, 18.3 GPa and 40 GPa; the four lower values are representative of currently used cementing lutes and 40 GPa is set as an extreme high value. The stress distribution under simulated applied loads was determined. The preparation design demonstrated an effect on the stress state of the restored tooth system. The cement elastic modulus affected the stress state in the cement and dentin structures but not in the crown, the pulp, the periodontal ligament or the cancellous and cortical bone. The results of this study suggest that both the choice of the preparation design and the cement elastic modulus can affect the stress state within the restored crown-tooth complex.

Inter-Agency Evidence Sharing in Competition Law Enforcement

While transnational antitrust enforcement is becoming only more common, the access to foreign-based evidence remains a considerable practical challenge. This article appraises considerations and concerns surrounding confidentiality, and looks into ways of their possible accommodation. It further identifies and critically evaluates the existing mechanisms allowing for inter-agency confidential information/ evidence sharing in competition law enforcement. The article outlines the shortcomings of the current framework and points to novel unilateral approaches. In the latter regard the focus is devoted to Australia, where the competition agency is empowered to share confidential information with foreign counterparts, also without any underlying bilateral agreement and on a non-reciprocal basis. This solution shows that a pragmatic and workable approach to inter-agency evidence sharing can be achieved.

On convergence with hiccups: recent amendments to Poland's competition law

Discusses the amendments to the Polish Competition Act 2007 adopted in June 2014 which aim to enhance the effectiveness of antitrust enforcement, including the introduction of: (1) civil fines for individuals; (2) a "leniency plus" programme based on the US model; (3) a settlement procedure; and (4) extended inspection powers for the Competition Authority. Assesses the likely effectiveness of the reforms.

Interspecific competition in honeybee intracellular gut parasites is asymmetric and favours the spread of an emerging infectious disease

There is increasing appreciation that hosts in natural populations are subject to infection by multiple parasite species. Yet the epidemiological and ecological processes determining the outcome of mixed infections are poorly understood. Here, we use two intracellular gut parasites (Microsporidia), one exotic and one co-evolved in the western honeybee (Apis mellifera), in an experiment in which either one or both parasites were administered either simultaneously or sequentially. We provide clear evidence of within-host competition; order of infection was an important determinant of the competitive outcome between parasites, with the first parasite significantly inhibiting the growth of the second, regardless of species. However, the strength of this ‘priority effect’ was highly asymmetric, with the exotic Nosema ceranae exhibiting stronger inhibition of Nosema apis than vice versa. Our results reveal an unusual asymmetry in parasite competition that is dependent on order of infection. When incorporated into a mathematical model of disease prevalence, we find asymmetric competition to be an important predictor of the patterns of parasite prevalence found in nature. Our findings demonstrate the wider significance of complex multi-host–multi-parasite interactions as drivers of host–pathogen community structure

Competition between memory-keeping and memory-erasing decoherence channels

We study the competing effects of simultaneous Markovian and non-Markovian decoherence mechanisms acting on a single spin. We show the existence of a threshold in the relative strength of such mechanisms above which the spin dynamics becomes fully Markovian, as revealed by the use of several non-Markovianity measures. We identify a measure-dependent nested structure of such thresholds, hinting at a causality relationship among the various non-Markovianity witnesses used in our analysis. Our considerations are then used to argue the unavoidably non-Markovian evolution of a single-electron quantum dot exposed to both intrinsic and Markovian technical noise, the latter of arbitrary strength.