Is a single item stress measure independently associated with subsequent severe injury: a prospective cohort study of 16,385 forest industry employees

Background: A previous review showed that high stress increases the risk of occupational injury by three- to five-fold. However, most of the prior studies have relied on short follow-ups. In this prospective cohort study we examined the effect of stress on recorded hospitalised injuries in an 8-year follow-up.
Methods: A total of 16,385 employees of a Finnish forest company responded to the questionnaire. Perceived stress was measured with a validated single-item measure, and analysed in relation recorded hospitalised injuries from 1986 to 2008. We used Cox proportional hazard regression models to examine the prospective associations between work stress, injuries and confounding factors.
Results: Highly stressed participants were approximately 40% more likely to be hospitalised due to injury over the follow-up period than participants with low stress. This association remained significant after adjustment for age, gender, marital status, occupational status, educational level, and physical work environment.
Conclusions: High stress is associated with an increased risk of severe injury.

Optimisation of Environment-friendly SCFRC mixes use in precast Concrete Industry

The concept of green concrete has been progressively introduced in concrete technology. At the same time, new generations of superplasticisers have become widely available and self-compacting concrete is being increasingly implemented. The aim of this research is to study the impact that different sustainable materials have on both fresh and hardened properties of Self-Compacting Fibre Reinforced Concrete (SCFRC) in order to implement their use in a precast concrete company. Different combinations of cement, mineral additions (active and inert), polypropylene fibres, superplasticisers, and aggregates have been considered. Fresh state performance has been assessed by means of: slump flow test, V-funnel, and J-ring. Concrete compressive strength values at different ages have been retained as representative of the material's performance in its hardened state. All these properties have been correlated with SCFRC proportioning parameters. The importance of interactions between mineral additions and between these and superplasticiser is emphasised, as well as the different consequences of using powders as cement replacement or as mineral additions.

Optimisation of Environment-friendly SCFRC mixes use in precast Concrete Industry (PDF Download Available). Available from: http://www.researchgate.net/publication/263304799_Optimisation_of_Environment-friendly_SCFRC_mixes_use_in_precast_Concrete_Industry [accessed Jun 5, 2015].

Government Influence on the Construction Industry during the Economic Recession 2007 - 2013

Due to the high degree of international and economic integration across the globe, the 2007 global financial crisis quickly spread, causing recessions and widespread credit restrictions in advanced nations. During recessions, economic fluctuations cause dramatic changes to the market structure of industries, in particular, that of the construction sector. These structural changes can be further influenced by government strategies and policies; which if used incorrectly, can serve to fuel and exacerbate downturns. In contrasting form, during an economic recession, government strategies and policies can also be used to aid in exiting such economic turbulence. From an extensive review of literature it became apparent that very little research offered a comprehensive and systematic overview of Irish and UK construction related government policies and strategies adopted during recessions; hence the emergence of this topic. As part of an ongoing research PhD, the purpose of this paper is to collate and group Irish and UK Government strategies and policies adopted for the construction sector during the recession period 2007-2013; resulting in the establishment of a construction industry development framework and a taxonomic framework. The results reveal serious problems with the national strategic plan for the Irish construction industry, given that there is no overseeing body or target dates for implementation of the proposed actions. Furthermore, both countries failed to prioritize the proposed key actions within their strategic plans. The findings of this paper can be applied in the context of the construction sector to address shortcomings in the respective sub-sectors, while also aiding policy makers and company executives in mapping out future strategic milestones.

The influence of providing perches and string on activity levels, fearfulness and leg health in commercial broiler chickens

The aim of this study was to assess the effect of providing environmental enrichment in the form of perches and string on the behaviour and welfare of commercial broiler chickens. Houses containing ~23 000 broiler chickens were assigned to one of four treatments in a 2×2 factorial design. Treatments involved two levels of access to perches (P) (present (24/house) ‘+P’ or absent ‘−P’) and two levels of access to string (S) (present (24/house) ‘+S’ or absent ‘−S’). All houses contained windows, and 30 straw bales were provided from day 10 of the rearing cycle. Treatments were applied in one of four houses on a single farm, and were replicated over four production cycles. Behaviour and leg health were observed in weeks 3 to 5 of the rearing cycle. Production performance and environmental parameters were also measured. There was an interaction between perches and age in the percentage of birds observed lying, with higher percentages of birds observed lying in the +P treatment than in the −P treatment during weeks 4 and 5. There was also a significant interaction between string and age in the percentage of birds observed in locomotion, with higher percentages observed in locomotion in the −S treatment than in the +S treatment during weeks 4 and 5. There was also an interaction between string and age in average gait scores, with lower gait scores in the +S treatment than in the −S treatment during weeks 3 and 5 but not within week 4. Daytime observations showed that perches and strings were used frequently, with one bout of perching occurring approximately every 80 s/perch, and one bout of pecking at string occurring every 78 s/string on average. There was a significant effect of age on use of perches (P<0.001) and string (P<0.001), with perching peaking during week 5 and string pecking peaking during week 3. We conclude that commercial broilers in windowed houses with access to straw bales display an interest in additional enrichment stimuli in the form of perches and string, and therefore that these stimuli have the potential to improve welfare. In addition, provision of string as a pecking device appeared to positively influence walking ability. However, this effect was numerically small, was only shown in certain weeks and was not reflected in the other leg health measure (latency to lie). The results also showed an apparent negative effect of string and perches on the activity levels of birds (recorded away from the immediate vicinity of these enrichments) towards the end of the production cycle. These results emphasise the need for further research into optimum design and layout of enrichment stimuli for modern broilers in windowed houses to ensure that their provision leads to clear welfare benefits.

Implications of nanotechnology for the agri-food industry: Opportunities, benefits and risks

Nanotechnology has emerged as a technological advancement that could develop and transform the entire agri-food sector, with the potential to increase agricultural productivity, food security and economic growth for industries. Though as still a relatively new concept there are concerns over its safety, regulation and acceptance by the industry and consumers. This review set out to address the implications of nanotechnology for the agri-food industry by examining the potential benefits, risks and opportunities. Existing scientific gaps in knowledge are believed to be a prohibitive factor in addition to uncertainties in the level of awareness and attitudes towards the use of nanotechnology by the industry.

GPCR structure, function, drug discovery and crystallography: report from Academia-Industry International Conference (UK Royal Society) Chicheley Hall, 1-2 September 2014

G-protein coupled receptors (GPCRs) are the targets of over half of all prescribed drugs today. The UniProt database has records for about 800 proteins classified as GPCRs, but drugs have only been developed against 50 of these. Thus, there is huge potential in terms of the number of targets for new therapies to be designed. Several breakthroughs in GPCRs biased pharmacology, structural biology, modelling and scoring have resulted in a resurgence of interest in GPCRs as drug targets. Therefore, an international conference, sponsored by the Royal Society, with world-renowned researchers from industry and academia was recently held to discuss recent progress and highlight key areas of future research needed to accelerate GPCR drug discovery. Several key points emerged. Firstly, structures for all three major classes of GPCRs have now been solved and there is increasing coverage across the GPCR phylogenetic tree. This is likely to be substantially enhanced with data from x-ray free electron sources as they move beyond proof of concept. Secondly, the concept of biased signalling or functional selectivity is likely to be prevalent in many GPCRs, and this presents exciting new opportunities for selectivity and the control of side effects, especially when combined with increasing data regarding allosteric modulation. Thirdly, there will almost certainly be some GPCRs that will remain difficult targets because they exhibit complex ligand dependencies and have many metastable states rendering them difficult to resolve by crystallographic methods. Subtle effects within the packing of the transmembrane helices are likely to mask and contribute to this aspect, which may play a role in species dependent behaviour. This is particularly important because it has ramifications for how we interpret pre-clinical data. In summary, collaborative efforts between industry and academia have delivered significant progress in terms of structure and understanding of GPCRs and will be essential for resolving problems associated with the more difficult targets in the future.

Material Waste in the Northern Ireland Construction Industry: On-Site Management Causes and Methods of Prevention

The construction industry in Northern Ireland is one of the major contributors of construction waste to landfill each year. The aim of this research paper is to identify the core on-site management causes of material waste on construction sites in Northern Ireland and to illustrate various methods of prevention which can be adopted. The research begins with a detailed literature review and is complemented with the conduction of semi-structured interviews with 6 professionals who are experienced and active within the Northern Ireland construction industry. Following on from the literature review and interviews analysis, a questionnaire survey is developed to obtain further information in relation to the subject area. The questionnaire is based on the key findings of the previous stages to direct the research towards the most influential factors. The analysis of the survey responses reveals that the core causes of waste generation include a rushed program, poor handling and on-site damage of materials, while the principal methods of prevention emerge as the adequate storage, the reuse of material on-site and efficient material ordering. Furthermore, the role of the professional background in the shaping of perceptions relevant to waste management is also investigated and significant differences are identified. The findings of this research are beneficial for the industry as they enhance the understanding of construction waste generation causes and highlight the practices required to reduce waste on-site in the context of sustainable development.

Reducing SCADA System Nuisance Alarms in the Water Industry in Northern Ireland

The advancement of telemetry control for the water industry has increased the difficulty of 14 managing large volumes of nuisance alarms (i.e. alarms that do not require a response). The aim 15 of this study was to identify and reduce the number of nuisance alarms that occur for Northern 16 Ireland (NI) Water by carrying-out alarm duration analysis to determine the appropriate length of 17 persistence (an advanced alarm management tool) that could be applied. All data was extracted 18 from TelemWeb (NI Water’s telemetry monitoring system) and analysed in Excel. Over a 6 19 week period, an average of 40,000 alarms occurred per week. The alarm duration analysis, which 20 has never been implemented before by NI Water, found that an average of 57% of NI Water 21 alarms had a duration of <5 minutes. Applying 5 minute persistence; therefore, could prevent an 22 average 26,816 nuisance alarms per week. Most of these alarms were from wastewater assets.

The effect of level of straw bale provision on the behaviour and leg health of commercial broiler chickens

This study aimed to assess the effect of the number of straw bales (SBs) provided on the behaviour and leg health of commercial broiler chickens. Houses containing ~23 000 broiler chickens were assigned to one of two treatments: (1) access to 30 SBs per house, ‘30SB’ or (2) access to 45 SB per house, ‘45SB’. This equated to bale densities of 1 bale/44 m2 and 1 bale/29 m2 of floor space within houses, respectively. Treatments were applied in one of two houses on a commercial farm, and were replicated over six production cycles. Both houses had windows and were also artificially lit. Behaviour was observed in weeks 3 to5 of the cycle. This involved observations of general behaviour and activity, gait scores (0: perfect to 5: unable to walk) and latency to lie (measured in seconds from when a bird had been encouraged to stand). Production performance and environmental parameters were also measured. SB density had no significant effect on activity levels (P>0.05) or walking ability (P>0.05). However, the average latency to lie was greater in 30SB birds compared with 45SB birds (P<0.05). The incidence of hock burn and podo dermatitis, average BW at slaughter and levels of mortality and culling were unaffected by SB density (P>0.05). The results from this study suggest that increasing SB levels from 1 bale/44 m2 to 1 bale/29 m2 floor space does not lead to significant improvements in the welfare of commercial broiler chickens in windowed houses.