Beyond the National Resource Privilege: towards an International Court of the Environment

The national resource privilege, which holds that states are allowed to control all the natural resources found in their territory, is a cornerstone of international politics. Supporters of the national resource privilege claim that without the privilege states would fail to be sovereign and self-determining entities which provide for the needs of their citizens. However, as this paper shows the case is not as simple as that. In fact, control over resources must be carefully unpacked. Doing so shows that states do not require full control over all resources found in their territory in order to be sovereign. Moreover, sovereignty and self-determination come with a set of responsibilities and duties attached. Based on these observations the paper will sketch the contours of an alternative resource governance scheme built around the idea of an International Court of the Environment.

Advanced Ceramic Substrate with Ordered and Designed Micro-Structure for Applications in Automotive Catalysts

This study describes an innovative monolith structure designed for applications in automotive catalysis using an advanced manufacturing approach developed at Imperial College London. The production process combines extrusion with phase inversion of a ceramic-polymer-solvent mixture in order to design highly ordered substrate micro-structures that offer improvements in performance, including reduced PGM loading, reduced catalyst ageing and reduced backpressure.

This study compares the performance of the novel substrate for CO oxidation against commercially available 400 cpsi and 900 cpsi catalysts using gas concentrations and a flow rate equivalent to those experienced by a full catalyst brick when attached to a vehicle. Due to the novel micro-structure, no washcoat was required for the initial testing and 13 g/ft3 of Pd was deposited directly throughout the substrate structure in the absence of a washcoat.

Initial results for CO oxidation indicate that the advanced micro-structure leads to enhanced conversion efficiency. Despite an 79% reduction in metal loading and the absence of a washcoat, the novel substrate sample performs well, with a light-off temperature (LOT) only 15 °C higher than the commercial 400 cpsi sample.

To test the effects of catalyst ageing on light-off temperature, each sample was aged statically at a temperature of 1000 °C, based on the Bench Ageing Time (BAT) equation. The novel substrate performed impressively when compared to the commercial samples, with a variation in light-off temperature of only 3% after 80 equivalent hours of ageing, compared to 12% and 25% for the 400 cpsi and 900 cpsi monoliths, respectively.

An anatomical study of the human lumbar ligamentum flavum

Objectives: A detailed investigation of the gross and microscopic anatomy of ligamentum flavum. Methods: Material included 14 lumbar vertebral columns obtained from the Anatomy Department, King Faisal University, Dammam during the period between January 2005 and January 2006. Height, width, and thickness of ligamenta flava were measured. A microscopic study was also performed. Computed tomography scan was carried out on the lumbar vertebrae of 30 patients for measuring the ligamentum flavum. Results: The anatomical results showed that the right and left ligamenta flava join in the midline forming an acute angle with a ventral opening. The ligamentum flavum is rectangular and has 4 borders and 2 surfaces. It is attached inferiorly to the superior edge and the postero-superior surface of the lamina below. It is attached superiorly to the inferior edge and the antero-inferior surface of the lamina above. Its height ranges from 14-22 mm. The width of its lower part ranges from 11-23 mm, and the thickness ranges from 3.5-6 mm. The histological results revealed that it is comprised chiefly of elastic fibres and some collagen fibres. Conclusion: The information reported in this study is of clinical value in the practice of lumbar epidural anesthesia or analgesia. Epidural puncture will be best performed through the lower and medial portion of the ligamentum flavum slightly lateral to the midline.

Mode of insertion of the abductor hallucis muscle in human feet and its arterial supply

The abductor hallucis flap is commonly used as a pedicled flap (distally or proximally based) in the management of ankle, heel, and mid-foot lesions, where it is ideally used for closing defects. This study investigates the anatomical details of this muscle regarding its various forms of insertion and its arterial supply in 15 cadaveric feet. Four types of insertion could be distinguished: type A, insertion at the proximal phalanx of the big toe (46.7%); type B, insertion by two slips into the base of the proximal phalanx and the sesamoid bone (33.3%); type C, insertion at the sesamoid bone (6.7%); And type D, the insertion is divided into superficial tendinous and deep fleshy parts which are attached to the base of the proximal phalanx and to the metatarsophalangeal joint capsule of the big toe, respectively (13.3%). As regards the arterial supply, three patterns were noticed: pattern A (40%) where the medial plantar artery (MPA) is divided into superficial and deep branches that supplied the muscle; pattern B (53.3%) where the MPA failed to produce a deep branch but instead continued as the superficial branch supplying the two ends of the muscle; and pattern C (6.6%) where the MPA continued as a deep branch supplying the muscle. A superficial branch of MPA provided a branch to the abductor hallucis muscle from its proximal part. In two specimens (13.3%), the lateral plantar artery shared in the supply of the most proximal part of the muscle. These results can be useful in determining the appropriate flap design based on the abductor hallucis type of insertion and the pattern of its arterial supply in the patients.

Wearable inkjet-printed antenna performance for medical applications at 868/915 MHz

The use of biosensors attached to the body for health monitoring is now readily accepted, and the merits of such systems and their potential impact on healthcare receive much attention. Wearable medical systems used in clinical applications to monitor vital signs must be comfortable to wear, yet have robust performance to ensure reliable communications links. Additionally, and vital to the success of these innovations, is that these solutions are disposable to avoid risk of patient infection and this means that they must be ultra-low cost. Antennas optimized for printing using conductive inks offer new exciting advances in making a truly disposable solution.

Prefab (and preserve): An investigation of retrofitting for Belfast's Victorian terraced social housing

This paper investigates the potential for the reuse of Belfast's existing Victorian terraced housing. The aim is to study methods behind retrofitting these unique pieces of architectural heritage, bringing them up to modern day standards with reduced energy costs and CO2 emissions in line with the Climate Change Act of 2008 (‘the Act’). It also highlights the characteristics of sustainable retrofitting examples and original prefabricated element, which enable the 19th-century properties to be re-adapted to suit modern day needs. The analysis builds on a report by Mark Hines Architects, in association with SAVE Britain's Heritage,1 in which the company explains the detrimental effect that the ‘Pathfinder’ scheme has had on English cities. Similarly, in Belfast, redevelopment schemes such as that in the ‘Village’ district have intended to replace undervalued terraced housing stock, and search for more sustainable options to retain these homes along with with the embodied energy and traditions attached to them.

Effects of baited crab pots on cultivated mussel (Mytilus edulis) survival rates

The shore crab, Carcinus maenas, is recognized as a voracious predator of blue mussels, Mytilus edulis, having the potential to greatly reduce stocks in the benthic cultivation industry. As a consequence, baited crab pots are often deployed on and around cultivated benthic mussel beds to trap and remove crabs, in an attempt to reduce predatory pressure. Little is known about how C. maenas behaves around crab pots, but for many other crustacean fisheries, the trapping efficiency of pots is often low. Crabs may be attracted towards but not enter pots, instead feeding on cultivated mussels outside pots on the surrounding substratum. We tested whether the rate of loss of mussels attached to plates differed in areas next to baited pots compared with unbaited pots and to areas without any pots, at two sea loughs (60 km apart) in Northern Ireland. In Strangford Lough, more mussels were lost from plates next to baited pots than the other treatments. In Carlingford Lough, however, we found no difference in the number of mussels lost from plates in any treatment. This difference could be attributed to the different assemblages of mobile benthic predators at the two loughs. The presence of the starfish Asterias rubens, which was absent from experimental sites in Carlingford Lough, was thought to be responsible for increased predation rates near baited pots in Strangford. It is, therefore, important to consider local predator communities when deploying crab pots as a predator mitigation technique to ensure predation rates are in fact reduced and not enhanced. This study is of relevance not only to attempts to limit predation on commercial stocks of benthic cultivated mussels but also in situations where baited traps are deployed close to species vulnerable to mobile benthic predators.

Conjugate Heat Transfer Analysis of an Internally Cooled Gas Turbine Vane

A conjugate heat transfer (CHT) method was used to perform the aerothermal analysis of an internally cooled turbine vane, and was validated against experimental and empirical data.
Firstly, validation of the method with regard to internal cooling was done by reproducing heat transfer test data in a channel with pin fin heat augmenters, under steady constant wall temperature. The computed Nusselt numbers for the two tested configurations (full length circular pin fins attached to both walls and partial pin fins attached to one wall only) showed good agreement with the measurements. Sensitivity to mesh density was evaluated under this simplified case in order to establish mesh requirements for the analysis of the full component.
Secondly, the CHT method was applied onto a turbine vane test case from an actual engine. The predicted vane airfoil metal temperature was compared to the measured thermal paint data and the in-house empirical predictions. The CHT results agreed well with the thermal paint data and showed better prediction than the current empirical modeling approach.

Monitoring of saliva pH using miniaturized sensing tools as an indicator of oral health

The monitoring of oral disease is important, not alone for oral health, but for the detection and prevention of
systemic disease. The link between oral health and systemic disease is the focus of many studies, with
indications emerging of a causal link [1]. For disease diagnostics, blood has typically been the fluid of choice
for analysis, the retrieval of which is invasive and therefore unsuitable for wearable technology. Analysis of
saliva, however, is less invasive than that of blood, requires little or no pre-treatment and is abundantly
available. A strong correlation has been found between the analytes of blood and saliva [2] with saliva
containing biomarkers for diseases such as diabetes, oral cancer and cardiovascular disease. The development of
an implantable multi-parametric wireless sensor, to monitor both salivary analytes and changes in gingival
temperature, is the aim of this research project.
The aim of our current study is to detect changes in salivary pH, using a gold electrode with a pHsensitive
iridium oxide layer, and an Ion Sensitive Field Effect Transistor probe. Characterisation studies were
carried out in artificial saliva (AS). A salivary pH of between 4.5pH-7.5pH [3], and gingival temperature
between 35°C-38°C [4], were identified as the target range of interest for the human oral environment. Sensor
measurements were recorded in solutions of varying pH and temperature. An ISFET probe was then implanted
into a prototype denture and characterised in AS. This study demonstrates the suitability of ISFET and gold
electrode pH sensors for incorporation into implantable oral sensors.
[1] G. Taylor and W. Borgnakke, “Periodontal disease: associations with diabetes, glycemic control and
complications,” Oral Dis., vol. 14, no. 3, pp. 191–203, Apr. 2008.
[2] E. Tékus, M. Kaj, E. Szabó, N. L. Szénási, I. Kerepesi, M. Figler, R. Gábriel, and M. Wilhelm,
“Comparison of blood and saliva lactate level after maximum intensity exercise,” Acta Biol. Hung., vol. 63
Suppl 1, pp. 89–98, 2012.
[3] S. Naveen, M. L. Asha, G. Shubha, A. Bajoria, and A. Jose, “Salivary Flow Rate, pH and Buffering
Capacity in Pregnant and Non Pregnant Women - A Comparative Study,” JMED Res., pp. 1–8, Feb. 2014.
[4] A. F. Holthuis and F. S. Chebib, “Observations on temperature and temperature patterns of the gingiva. I.
The effect of arch, region and health,” J. Periodontol., vol. 54, no. 10, pp. 624–628, Oct. 1983

Film, History and Memory

Film, History and Memory examines the relationship between film and history, exploring the multiplicity of ways in which films depict, contest, reinforce or subvert historical understanding. This volume broadens the focus from 'history', the study of past events, to 'memory', the processes – individual, generational, collective or state-driven – by which meanings are attached to the past. This approach acknowledges how the significance of the historical film lies less in its empirical qualities than in its powerful capacity to influence public thinking and discourses about the past, whether by shaping collective memory, popular history and social memory, or by retrieving suppressed or marginalized histories. This study aims to contribute to the growing literature on history and film through the breadth of its approach, both in disciplinary and geographical terms. Contributors are drawn not only from the discipline of history but also film studies, film practice, art history, languages and literature, and cultural studies.

A strategy towards professionalism in the dissecting room

The teaching and cultivation of professionalism is an integral part of medical education as professionalism is central to maintaining the public’s trust in the medical profession. Traditionally professional values would have been acquired through an informal process of socialisation and observation of role models. Recently, however, medical educators have accepted the responsibility to explicitly teach and effectively evaluate professionalism. A comprehensive working definition of the term professionalism and a universally agreed list of the constituent elements of professionalism are currently debated. The School of Medicine and Dentistry of The Queen’s University of Belfast uses an approach of self-directed learning for teaching anatomy, and students are given the opportunity to learn anatomy from human dissection. Self-directed learning teams have been found to be underutilised as educational strategies and presented an opportunity to utilise the first year dissection room teaching environment to nurture the development of the attributes of professionalism. An educational strategy based on role-playing was developed to engage all students around the dissection table. Students received comprehensive background reviews on professionalism, its attributes and the identification of such attributes in the context of the dissection room. Roles, with specific duties attached, were allocated to each team member. Circulating academic staff members directly observed student participation and gave formative feedback. Students were given the opportunity to reflect on their ability to identify the attributes and reflect on their own and their peer’s ability to develop and practise these attributes. This strategy indicated that small group learning teams in the dissection room utilise widely accepted principles of adult learning and offer an opportunity to create learning activities that will instil in students the knowledge, values, attitudes and behaviours that characterise medical professionalism. Anatomy faculty have a responsibility to nurture and exemplify professionalism and play a significant role in the early promotion and inculcation of professionalism. It remains imperative not only to assess this strategy but also to create opportunities for critical reflection and evaluation within the strategy. Key words: Medical Education – Professionalism – Anatomy - Reflective Practise – Role-play

Conical Horn Antenna with Spiral Phase Plate for Difference Pattern Generation

This paper describes the performance characteristics and experimental validation of a compact conical horn antenna with a dielectric cylinder spiral phase plate attached at its aperture. This performs the function of a spatial phase imprinting device creating a helical wave-front which results in a null in the far field radiation pattern of the antenna assembly.

Young people exiting homelessness: An exploration of process, meaning and definition

In the past decade in particular, research attention has shifted from an almost exclusive focus on routes or pathways into homelessness towards the investigation of exits from homelessness. As well as demonstrating the multiple paths possible for young people who become homeless, recent research, and longitudinal studies in particular, has contributed to a more nuanced understanding of the complexity of the homeless pathways of young people. Nonetheless, knowledge and understanding of the nature of homeless exits, and of the mechanisms that facilitate the transition out of homelessness, is far from complete. This paper explores the processes surrounding the exit routes taken by young people out of homelessness and the meanings attached by them to these housing transitions based on selected findings from an ongoing qualitative longitudinal study of homeless youth in Dublin, Ireland. More broadly, the paper considers the utility of distinguishing between the types of routes that young people take out of homelessness, with particular attention to the notions of ‘independent’ and ‘dependent’ exits. The paper aims to further the discussion and debate on the conceptualisation of homeless exits and also discusses a number of policy implications arising from the study's findings.

The Aran jumper: Crafting a Transatlantic Heritage

The garment we now recognise as the Aran jumper emerged as an international symbol of Ireland from the twin twentieth century transatlantic flows of migration and tourism. Its power as a heritage object derives from: 1) the myth commonly associated with the object, in which the corpse of a drowned fisherman is identified and claimed by his family due to the stitch patterns of his jumper (Pádraig Ó Síochain 1962; Annette Lynch and Mitchell Strauss 2014); 2) the meanings attached to those stitch patterns, which have been read, for example, as genealogical records, representations of the natural landscape and references to Christian and pre-Christian ‘Celtic’ religion (Heinz Kiewe 1967; Catherine Nash 1996); and 3) booming popular interest in textile heritage on both sides of the Atlantic, fed by the reframing of domestic crafts such as knitting as privileged leisure pursuits (Rachel Maines 2009; Jo Turney 2009). The myth of the drowned fisherman plays into transatlantic migration narratives of loss and reclamation, promising a shared heritage that needs only to be decoded. The idea of the garment’s surface acting as text (or map) situates it within a preliterate idyll of romantic primitivism, while obscuring the circumstances of its manufacture. The contemporary resurgence in home textile production as recreation, mediated through transnational online networks, creates new markets for heritage textile products while attracting critical attention to the processes through which such objects, and mythologies, are produced. The Aran jumper’s associations with kinship, domesticity and national character make it a powerful tool in the promotion of ancestral (or genealogical) tourism, through marketing efforts such as The Gathering 2013. Nash’s (2010; 2014) work demonstrates the potential for such touristic encounters to disrupt and enrich public conceptions of heritage, belonging and relatedness. While the Aran jumper has been used to commodify a simplistic sense of mutuality between Ireland and north America, it carries complex transatlantic messages in both directions.

Panning for Gold: The Standardizing Work of Filling “Autistic” Shells – Using institutional ethnography to explore textually mediated health relations in the diagnostic process of autism.

Health reform practices in Canada and elsewhere have restructured the purpose and use of diagnostic labels and the processes of naming such labels. Diagnoses are no longer only a means to tell doctors and patients what may be wrong and indicate potential courses of treatment; some diagnoses activate specialized services and supports for persons with a disability and those who provide care for them. In British Columbia, a standardized process of diagnosis with the outcome of an autism spectrum disorder gives access to government provided health care and educational services and supports. Such processes enter individuals into a complex of text mediated relations, regulated by the principles of evidence-based medicine. However, the diagnosis of autism in children is notoriously uncertain. Because of this ambiguity, standardizing the diagnostic process creates a hurdle in gaining help and support for parents who have children with problems that could lead to a diagnosis on the autism spectrum. Such processes and their organizing relations are problematized, explored and explicated below. Grounded in the epistemological and ontological shift offered by Dorothy E. Smith (1987; 1990a; 1999; 2005), this article reports on the findings of an institutional ethnographic study that explored the diagnostic process of autism in British Columbia. More specifically, this article focuses on the processes involved in going from mothers talking from their experience about their childrens problems to the formalized and standardized, and thus “virtually” produced, diagnoses that may or may not give access to services and supports in different systems of care. Two psychologists, a developmental pediatrician, a social worker – members of a specialized multidisciplinary assessment team – and several mothers of children with a diagnosis on the autism spectrum were interviewed. The implications of standardizing the diagnosis process of a disability that is not clear-cut and has funding attached are discussed. This ethnography also provides a glimpse of the implications of current and ongoing reforms in the state-supported health care system in British Columbia, and more generally in Canada, for people’s everyday doings.