Designing for dementia : an assessment of the impact of the physical environment on wayfinding success for residents in long term care settings

It is acknowledged that one of the consequences of the ageing process is cognitive decline, which leads to an increase in the incidence of illnesses such as dementia. This has become ever more relevant due to the projected increase in the ageing demographic. Dementia affects visuo-spatial perception, causing difficulty with wayfinding, even during the early stages of the disease. The literature widely recognises the physical environment’s role in alleviating symptoms of dementia and improving quality of life for residents. It also identifies the lack of available housing options for older people with dementia and consequently the current stock is ill-equipped to provide adequate support.
Recent statistics indicate that 80% of those residing in nursing or residential care homes have some form of dementia or severe memory problems. The shift towards institutional care settings, the need for specialist support and care, places a greater impetus on the need for a person-centred approach to tackle issues related to wayfinding and dementia.
This thesis therefore aims to improve design for dementia in nursing and residential care settings in the context of Northern Ireland. This will be undertaken in order to provide a better understanding of how people with dementia experience the physical environment and to highlight features of the design that assist with wayfinding. Currently there are limited guidelines on design for dementia, meaning that many of these are theoretical, anecdotal and not definitive. Hence a greater verification to address the less recognised design issues is required. This is intended to ultimately improve quality of life, wellbeing, independence and uphold the dignity of people with dementia living in nursing or residential care homes.
The research design uses a mixed methods approach. A thorough preparation and consideration of ethical issues informed the methodology. The various facets were also trialled and piloted to identify any ethical, technological, methodological, data collection and analysis issues. The protocol was then amended to improve or resolve any of the aforementioned issues. Initially a questionnaire based on leading design recommendations was conducted with home managers. Semi-structured interviews were developed from this and conducted with staff and resident’s next of kin. An evidence-based approach was used to design a study which used ethnographic methods, including a wayfinding task. This followed a repeated measures design which would be used to actively engage residents with dementia in the research. Complementary to the wayfinding task, conversational and semi-structured interviews were used to promote dialogue and direct responses with the person with dementia. In addition to this, Space Syntax methodologies were used to examine the physical properties of the architectural layout. This was then cross-examined with interview responses and data from the wayfinding tasks.
A number of plan typologies were identified and were determined as synonymous with decision point types which needed to be made during the walks. The empirical work enabled the synthesis of environmental features which support wayfinding.
Results indicate that particular environmental features are associated with improved performance on the wayfinding tasks. By enhancing design for dementia, through identifying the attributes, challenges with wayfinding may be overcome and the benefits of the physical environment can be seen to promote wellbeing.
The implications of this work mean that the environmental features which have been highlighted from the project can be used to inform guidelines, thus adding to existing knowledge. Future work would involve the dissemination of this information and the potential for it to be made into design standards or regulations which champion design for dementia. These would increase awareness for designers and stakeholders undertaking new projects, extensions or refurbishments.
A person-centred, evidence-based design was emphasised throughout the project which guaranteed an in-depth study. There were limitations due to the available resources, time and funding. Future research would involve testing the identified environmental features within a specific environment to enable measured observation of improvements.

THE SAAF STUDY: evaluation of the Safeguarding Children Assessment and Analysis Framework (SAAF), compared with management as usual, for improving outcomes for children and young people who have experienced, or are at risk of, maltreatment: study protocol for a randomised controlled trial

Background: Serious case reviews and research studies have indicated weaknesses in risk assessments conducted by child protection social workers. Social workers are adept at gathering information but struggle with analysis and assessment of risk. The Department for Education wants to know if the use of a structured decision-making tool can improve child protection assessments of risk.

Methods/design: This multi-site, cluster-randomised trial will assess the effectiveness of the Safeguarding Children Assessment and Analysis Framework (SAAF). This structured decision-making tool aims to improve social workers' assessments of harm, of future risk and parents' capacity to change. The comparison is management as usual.

Inclusion criteria: Children's Services Departments (CSDs) in England willing to make relevant teams available to be randomised, and willing to meet the trial's training and data collection requirements.

Exclusion criteria: CSDs where there were concerns about performance; where a major organisational restructuring was planned or under way; or where other risk assessment tools were in use.

Six CSDs are participating in this study. Social workers in the experimental arm will receive 2 days training in SAAF together with a range of support materials, and access to limited telephone consultation post-training. The primary outcome is child maltreatment. This will be assessed using data collected nationally on two key performance indicators: the first is the number of children in a year who have been subject to a second Child Protection Plan (CPP); the second is the number of re-referrals of children because of related concerns about maltreatment. Secondary outcomes are: i) the quality of assessments judged against a schedule of quality criteria and ii) the relationship between the three assessments required by the structured decision-making tool (level of harm, risk of (re) abuse and prospects for successful intervention).

Discussion: This is the first study to examine the effectiveness of SAAF. It will contribute to a very limited literature on the contribution that structured decision-making tools can make to improving risk assessment and case planning in child protection and on what is involved in their effective implementation.

Methods and Metrics for Fair Server Assessment under Real-Time Financial Workloads

We present a rigorous methodology and new metrics for fair comparison of server and microserver platforms. Deploying our methodology and metrics, we compare a microserver with ARM cores against two servers with ×86 cores running the same real-time financial analytics workload. We define workload-specific but platform-independent performance metrics for platform comparison, targeting both datacenter operators and end users. Our methodology establishes that a server based on the Xeon Phi co-processor delivers the highest performance and energy efficiency. However, by scaling out energy-efficient microservers, we achieve competitive or better energy efficiency than a power-equivalent server with two Sandy Bridge sockets, despite the microserver's slower cores. Using a new iso-QoS metric, we find that the ARM microserver scales enough to meet market throughput demand, that is, a 100% QoS in terms of timely option pricing, with as little as 55% of the energy consumed by the Sandy Bridge server.

A Numerical and Experimental Assessment of the Use of a Turbine Utilizing Splitter Blades for an Automotive Variable Geometry Turbocharger

Automotive manufacturers require improved part load engine performance to further improve fuel economy. For a swing vane VGS (Variable Geometry Stator) turbine this means a more closed stator vane, to deal with the low MFRs (Mass Flow Rates), high PRs (Pressure Ratios) and low rotor rotational speeds. During these conditions the turbine is operating at low velocity ratios. As more energy is available at high pressure ratios and during lower turbocharger rotational speeds, a turbine which is efficient at these conditions is desirable. Another key aspect for automotive manufacturers is engine responsiveness. High inertia designs result in “turbo lag” which means an increased time before the target boost pressure is reached. Therefore, designs with improved performance at low velocity ratios, reduced inertia or an increased swallowing capacity are the current targets for turbocharger manufacturers.

To try to meet these design targets a CFD (Computational Fluid Dynamics) study was performed on a turbine wheel using splitter blades. A number of parameters were investigated. These included splitter blade merdional length, blade number and blade angle distribution.

The numerical study was performed on a scaled automotive VGS. Three different stator vane positions have been analysed. A single passage CFD model was developed and used to provide information on the flow features affecting performance in both the stator vanes and turbine.

Following the CFD investigation the design with the best compromise in terms of performance, inertia and increased MFP (Mass Flow Parameter) was selected for manufacture and testing. Tests were performed on a scaled, low temperature turbine test rig. The aerodynamic flow path of the gas stand was the same as that investigated during the CFD. The test results revealed a design which had similar performance at the closed stator vane positions when compared to the baseline wheel. At the maximum MFR stator vane condition a drop of −0.6% pts in efficiency was seen. However, 5.5% increase in MFP was obtained with the additional benefit of a drop in rotor inertia of 3.7%, compared to the baseline wheel.

Assessment of the double-skin façade passive thermal buffer effect.

Double Skin Façades (DSFs) are becoming increasingly popular architecture for commercial office buildings. Although DSFs are widely accepted to have the capacity to offer significant passive benefits and enable low energy building performance, there remains a paucity of knowledge with regard to their operation. Identification of the most determinant architectural parameters of DSFs is the focus of ongoing research. This paper presents an experimental and simulation study of a DSF installed on a commercial building in Dublin, Ireland. The DSF is south facing and acts to buffer the building from winter heat losses, but risks enhancing over-heating on sunny days. The façade is extensively monitored during winter months. Computational Fluid Dynamic (CFD) models are used to simulate the convective operation of the DSF. This research concludes DSFs as suited for passive, low energy architecture in temperature climates such as Ireland but identifies issues requiring attention in DSF design.

An efficient and robust case sorting for algorithm for transient stability assessment

An efficient and robust case sorting algorithm based on Extended Equal Area Criterion (EEAC) is proposed in this paper for power system transient stability assessment (TSA). The time-varying degree of an equivalent image system can be deduced by comparing the analysis results of Static EEAC (SEEAC) and Dynamic EEAC (DEEAC), the former of which neglects all time-varying factors while the latter partially considers the time-varying factors. Case sorting rules according to their transient stability severity are set combining the time-varying degree and fault messages. Then a case sorting algorithm is designed with the “OR” logic among multiple rules, based on which each case can be identified into one of the following five categories, namely stable, suspected stable, marginal, suspected unstable and unstable. The performance of this algorithm is verified by studying 1652 contingency cases from 9 real Chinese provincial power systems under various operating conditions. It is shown that desirable classification accuracy can be achieved for all the contingency cases at the cost of very little extra computational burden and only 9.81% of the whole cases need to carry out further detailed calculation in rigorous on-line TSA conditions.

Repeatability and reliability of new air and water permeability tests for assessing the durability of high-performance concretes

This paper reports on the accuracy of new test methods developed to measure the air and water permeability of high-performance concretes (HPCs). Five representative HPC and one normal concrete (NC) mixtures were tested to estimate both repeatability and reliability of the proposed methods. Repeatability acceptance was adjudged using values of signal-noise ratio (SNR) and discrimination ratio (DR), and reliability was investigated by comparing against standard laboratory-based test methods (i.e., the RILEM gas permeability test and BS EN water penetration test). With SNR and DR values satisfying recommended criteria, it was concluded that test repeatability error has no significant influence on results. In addition, the research confirmed strong positive relationships between the proposed test methods and existing standard permeability assessment techniques. Based on these findings, the proposed test methods show strong potential to become recognized as international methods for determining the permeability of HPCs.

Novel system for distant assessment of cataract surgical quality in rural China

BACKGROUND: This study aims to assess the quality of various steps of manual small incision cataract surgery and predictors of quality, using video recordings.
DESIGN: This paper applies a retrospective study.
PARTICIPANTS: Fifty-two trainees participated in a hands-on small incision cataract surgery training programme at rural Chinese hospitals.
METHODS: Trainees provided one video each recorded by a tripod-mounted digital recorder after completing a one-week theoretical course and hands-on training monitored by expert trainers. Videos were graded by two different experts, using a 4-point scale developed by the International Council of Ophthalmology for each of 12 surgical steps and six global factors. Grades ranged from 2 (worst) to 5 (best), with a score of 0 if the step was performed by trainers.
MAIN OUTCOME MEASURES: Mean score for the performance of each cataract surgical step rated by trainers.
RESULTS: Videos and data were available for 49/52 trainees (94.2%, median age 38 years, 16.3% women and 77.5% completing > 50 training cases). The majority (53.1%, 26/49) had performed ≤ 50 cataract surgeries prior to training. Kappa was 0.57∼0.98 for the steps (mean 0.85). Poorest-rated steps were draping the surgical field (mean ± standard deviation = 3.27 ± 0.78), hydro-dissection (3.88 ± 1.22) and wound closure (3.92 ± 1.03), and top-rated steps were insertion of viscoelastic (4.96 ± 0.20) and anterior chamber entry (4.69 ± 0.74). In linear regression models, higher total score was associated with younger age (P = 0.015) and having performed >50 independent manual small incision cases (P = 0.039).
CONCLUSIONS: More training should be given to preoperative draping, which is poorly performed and crucial in preventing infection. Surgical experience improves ratings.© 2015 Royal Australian and New Zealand College of Ophthalmologists.

The Effect of Seat Location in Lecture Theatres on Academic Performance

The purpose of this research study was to investigate and identify possible patterns relating to academic performance on the effects of university students self-selecting where to sit in a lecture theatre.
The key research questions are:
1. Does seating position affect student performance?
2. Do the most academically able and engaged students regularly sit at the front of lecture theatres?
Academic achievement
Preliminary results suggest significant assessment score differences between those that sit at the front and those that sit further the back. Of those that received a grade of 75%+ (Grade A) 6.67% regularly sat at the back. With the same group 46.67% regularly sat at the front. Of the group that scored less than 50% (Grade D) 0% of students regularly sat at the front. 12.50% regularly sat in the middle zones with 37.50% sitting at the back. It was also observed that the remaining numbers did not consistently sit in the same zone.

Temporal movement
There is little evidence of movement between seating zones of the Grade A group throughout the 24 week period. However there was considerable movement with the Grade D group. Although still under analysis there appears be a pattern of students in this group graduating towards the back seating positions over the course of the programme.

Engagement
The frequency of completed entries on PinPoint was also used as an indicator of engagement. With the Grade A group 75% of them regularly completed an entry whereas in the Grade D group this drops to less than 50%.
Further analysis on the attitudinal factors in relational to seating position and performance are ongoing, but preliminary results suggest that those students that scored highly in attitude tended to sit at the front and middle sections.
It would indeed appear that the more highly engaged and academically capable students voluntarily sit at the front for most lectures. Interestingly as the course progresses those who had lesser engagement and below average midterm results tend to began to sit progressively toward the back. If this is a repeatable pattern then a linear regression analysis of the seating positions and midterm results could help predict students in danger of failing.

Automated retinal image quality assessment on the UK Biobank dataset for epidemiological studies

Morphological changes in the retinal vascular network are associated with future risk of many systemic and vascular diseases. However, uncertainty over the presence and nature of some of these associations exists. Analysis of data from large population based studies will help to resolve these uncertainties. The QUARTZ (QUantitative Analysis of Retinal vessel Topology and siZe) retinal image analysis system allows automated processing of large numbers of retinal images. However, an image quality assessment module is needed to achieve full automation. In this paper, we propose such an algorithm, which uses the segmented vessel map to determine the suitability of retinal images for use in the creation of vessel morphometric data suitable for epidemiological studies. This includes an effective 3-dimensional feature set and support vector machine classification. A random subset of 800 retinal images from UK Biobank (a large prospective study of 500,000 middle aged adults; where 68,151 underwent retinal imaging) was used to examine the performance of the image quality algorithm. The algorithm achieved a sensitivity of 95.33% and a specificity of 91.13% for the detection of inadequate images. The strong performance of this image quality algorithm will make rapid automated analysis of vascular morphometry feasible on the entire UK Biobank dataset (and other large retinal datasets), with minimal operator involvement, and at low cost.