Frequency selective surface using nested split ring slot elements as a lens with mechanically reconfigurable beam steering capability

The design is described of a double layer frequency selective surface which can produce a differential phase shift of 180 ° as the wave propagates through it at normal incidence. The hand of an applied circularly polarized signal is reversed due to the 180° phase shift, and it is demonstrated that the exit circularly polarized output signal can be phase advanced or phase retarded by 180 ° upon rotation of the elements comprising the structure. This feature allows the surface to act as a spatial phase shifter. In this paper the beam steering capabilities of a 10 × 10 array of such elements are demonstrated. Here the individual elements comprising the array are rotated relative to each other in order to generate a progressive phase shift. At normal incidence the 3 dB Axial Ratio Bandwidth for LHCP to RHCP conversion is 5.3% and the insertion loss was found to be -2.3 dB, with minimum axial ratio of 0.05 dB. This array is shown to be able to steer a beam from -40 ° to +40 ° while holding axial ratio at the pointing angle to below 4 dB. The measured radiation patterns match the theoretical calculation and full-wave simulation results. © 2010 IEEE.

SEROTONINERGIC AND PEPTIDERGIC NERVE ELEMENTS IN THE PROTOSCOLEX OF ECHINOCOCCUS-GRANULOSUS (CESTODA, CYCLOPHYLLIDEA)

The localisation and distribution of 5-hydroxytryptamine (5-HT, or serotonin) and neuropeptides in the nervous system of the protoscolex of the hydatid organism Echinococcus granulosus were determined by an indirect immunofluorescence technique. Nerve-cell bodies immunoreactive for 5-HT occurred in the lateral ganglia and in association with the lateral longitudinal nerve cords. 5-HT immunostaining was also evident in the central nerve ring, in the rostellar nerves and in the nerve plexus innervating the suckers. Of the antisera used to screen the protoscolex for neuropeptide immunoreactivity (IR), immunostaining was obtained with those raised against pancreatic polypeptide (PP), peptide YY (PYY), substance P (SP), peptide histidine isoleucine (PI-II) and vasoactive intestinal peptide (VIP). The most extensive pattern of IR occurred with antisera to PP and PYY. Immunoreactive nerve elements were evident in the lateral ganglia, central nerve ring, rostellar nerves, rostellar ganglia, sucker plexus and longitudinal nerve cords. The distribution of SP-, PHI- and VIP-IRs was more restricted: SP-IR occurred in the lateral ganglia and sucker nerves, whilst PHI- and VIP-immunoreactive nerve elements were associated with the lateral longitudinal nerve cords. Protoscoleces cultured in vitro for 29 days were also examined and neuroanatomical changes noted. A greater development of the longitudinal nerve cords and their cross-connectives in the body of the worm was evident, and a group of nerve cells were seen to develop at the posterior end of the main lateral nerve cords.

CYTOCHEMICAL DEMONSTRATION OF CHOLINERGIC, SEROTONINERGIC AND PEPTIDERGIC NERVE ELEMENTS IN GORGODERINA-VITELLILOBA (TREMATODA, DIGENEA)

Standard enzyme cytochemical and indirect immunocytochemical techniques have been used in conjunction with light and confocal scanning laser microscopy (CSLM) to visualize cholinergic, serotoninergic and peptidergic nerve elements in whole-mount preparations of the amphibian urinary-bladder fluke, Gorgoderina vitelliloba. Cholinesterase (ChE) activity was localized in paired anterior ganglia, a connecting dorsal commissure and in the origins of the ventral nerve cords. Cholinergic ganglia were also evident in shelled embryos in the uterus. Serotonin-immunoreactivity (IR) was more extensive than ChE activity and was identified in both the central and peripheral nervous systems. Serotoninergic nerve fibres were associated with the somatic musculature and female reproductive ducts. Antisera to nine mammalian peptides and one invertebrate (FMRFamide) peptide have been used to investigate the peptidergic nervous system in the parasite. Immunoreactivity was obtained to five peptides, namely pancreatic polypeptide (PP), peptide YY (PYY), neuropeptide Y (NPY), substance P (SP) and FMRFamide. Peptidergic nerve fibres were found to be more abundant than demonstrable cholinergic or serotoninergic nerve fibres. NPY-IR was identified only in the main components of the central nervous system. However, PP- and PYY-IR occurred in the anterior ganglia, dorsal commissure, main nerve cords and in numerous small varicose fibres that ramified throughout the worm. Additionally, PP-immunoreactive nerve fibres were found to innervate the musculature of the female reproductive tracts. Six sites of IR were found in the acetabulum, using antisera directed towards the C-terminal end of PP and PYY, and these matched with the distribution of six non-ciliated rosette-like papillae observed by scanning electron microscopy. SP- and FMRFamide-IR were identified in the CNS, and FMRFamide-immunopositive nerve fibres were also evident in association with the gonopore/cirrus region and with the terminal excretory pore. Results are discussed with respect to possible roles for each of the neurochemical types.

Characterization of IS2112, a new insertion sequence from Rhodococcus, and its relationship with mobile elements belonging to the IS110 family

A new insertion sequence (IS2112) was identified in the genome of the 1-haloalkane-utilizing bacterium Rhodococcus rhodochrous NCIMB 13064. The insertion element is 1415 bp long, does not contain terminal inverted repeats, and is not flanked by directly repeated sequences. IS2112 belongs to the IS110 family of transposable elements, and forms a separate subfamily, along with IS116, Two copies of IS2112 were found in R, rhodochrous NCIMB 13064 and one, two or three copies of a similar sequence were detected in five other 1-haloalkane-degrading Rhodococcus strains. There were no sequences homologous to IS2112 found in the l-haloalkane-degrading 'Pseudomonas pavonaceae' 170 and Rhodococcus sp, HA1 or in several Rhodococcus strains which do not utilize haloalkanes, IS2112 was originally found in plasmid pRTL1 of R. rhodochrous NCIMB 13064 which harbours genes encoding utilization of l-haloalkanes, and was located 5 kbp upstream of the haloalkane dehalogenase gene (dhaA), Although the second copy of IS2112 in strain NCIMB 13064 was also present on the pRTL1 plasmid, these sequences do not apparently comprise a single composite transposon encoding haloalkane utilization. An analysis of derivatives of NCIMB 13064 revealed that IS2112 was involved in genome rearrangements. IS2112 appeared to change its location as a result of transposition and as a result of other rearrangements of the NCIMB 13064 genome.

The Supremacy of the Sequence: Key Elements and Dimensions in the Process of Change

How single organizations manage the process of change and why only some of them are able to actually reach radical change are central questions in today’s theoretical debate. The role played by the process of change and its dimensions (namely, pace, sequence and linearity), however, has been poorly investigated. Drawing on archetype theory, this paper explores: (i) whether a specific pace of radical change exists; (ii) whether different outcomes of change are characterized by different sequences of change in key-structures and systems (iii) how the three dimensions of the process of change possibly interact. As an example of organizational change the study takes into consideration processes of accounting change in three departments of two Canadian and two Italian municipalities. The results suggest the supremacy of the sequence of implemented changes over the other two dimensions of the process in order to achieve a radical outcome of change.

Pull-out behaviour of axially loaded basalt fibre reinforced polymer (BFRP) rods bonded parallel to the grain of glulam elements

Synopsis: Bonded-in rod timber joints off er several advantages over conventional types of joint, including high local force transfer, very stiff connections, and improved ?re and aesthetic properties since the connection is completely hidden in the insulating timber members. More recently, the use of ?bre reinforced polymer (FRP) as a connecting rod, alternative to steel rods, in bonded-in rod connections for timber structures has been investigated. However, the investigation into the behaviour of such joints is limited, in particular, connections involving basalt ?bre reinforced polymers (BFRP) bars - which is the primary focus of this research. This paper presents an experimental programme conducted to investigate the behaviour of bonded-in BFRP bars loaded parallel to the grain of glulam members. Tensile pull-out tests were conducted to examine the effect of bonded length and bond stress-slip on the structural capacity of the connection. An analytical design expression for predicting pull-out capacity is proposed and the results have been compared with some established design equations. It was found that pull-out load increased approximately linearly with the bonded length, up to maximum which occurred at a bonded length of 15 times the hole diameter, and did not increase beyond this bonded length. The most signi?cant failure modes were failure at the timber/adhesive interface followed by pullout of the BFRP rod. Increased bonded lengths resulted in higher bond slip values compared to lower equivalent bonded lengths. The proposed design model gave the best predictions of pull-out capacity compared with other existing models.