Radiative rates and electron impact excitation rates for transitions in Cr VIII

Aims. In this paper we report on calculations of energy levels, radiative rates, oscillator strengths, line strengths, and effective collision strengths for transitions among the lowest 362 levels of the (1s22s22p6) 3s23p5, 3s3p6, 3s23p43d, 3s3p53d, 3s23p33d2, 3s3p43d2, 3p63d, and 3s23p44 configurations of Cr viii. Methods. The general-purpose relativistic atomic structure package (grasp) and flexible atomic code (fac) are adopted for the calculations. Results. Radiative rates, oscillator strengths, and line strengths are reported for all electric dipole (E1), magnetic dipole (M1), electric quadrupole (E2), and magnetic quadrupole (M2) transitions among the 362 levels. Comparisons are made with earlier available results and the accuracy of the data is assessed. Additionally, lifetimes for all 362 levels are listed, although comparisons with other theoretical results are limited to only a few levels. Our energy levels are estimated to be accurate to better than 3% (within 0.4 Ryd), whereas results for other parameters are probably accurate to better than 20%. Finally, electron impact collision strengths and excitation rates are computed for all transitions over a wide energy (temperature) range. For these calculations, FAC is adopted and results in the form of effective collision strengths are reported over a wide temperature range of 105.0−106.6 K.

Energy levels, radiative rates and electron impact excitation rates for transitions in He-like Cl XVI, K XVIII, Ca XIX and Sc XX.

We report calculations of energy levels, radiative rates and electron impact excitation cross
sections and rates for transitions in He-like Cl XVI, K XVIII, Ca XIX and Sc XX. The grasp
(general-purpose relativistic atomic structure package) is adopted for calculating energy levels
and radiative rates. To determine the collision strengths and subsequently the excitation rates,
the Dirac atomic R-matrix code (darc) is used. Oscillator strengths, radiative rates and line
strengths are reported for all E1, E2, M1 and M2 transitions among the lowest 49 levels of
each ion. Collision strengths are averaged over a Maxwellian velocity distribution and the
effective collision strengths obtained listed over a wide temperature range up to 107.4 K.
Comparisons are made with similar data obtained from the flexible atomic code (fac) to
highlight the importance of resonances, included in calculations with darc, in the
determination of effective collision strengths. Discrepancies between the collision strengths
from darc and fac, particularly for forbidden transitions, are also discussed. Additionally,
theoretical lifetimes are listed for all the 49 levels of the above four ions.

Comparative Characterisation of 3-D Hydroxyapatite Scaffolds Developed via Replication of Synthetic Polymer Foams and Natural Marine Sponges

The production of complex inorganic forms, based on naturally occurring scaffolds offers an exciting avenue for the construction of a new generation of ceramic-based bone substitute scaffolds. The following study reports an investigation into the architecture (porosity, pore size distribution, pore interconnectivity and permeability), mechanical properties and cytotoxic response of hydroxyapatite bone substitutes produced using synthetic polymer foam and natural marine sponge performs. Infiltration of polyurethane foam (60 pores/in2) using a high solid content (80wt %), low viscosity (0.126Pas) hydroxyapatite slurry yielded 84-91% porous replica scaffolds with pore sizes ranging from 50µm - 1000µm (average pore size 577µm), 99.99% pore interconnectivity and a permeability value of 46.4 x10-10m2. Infiltration of the natural marine sponge, Spongia agaricina, yielded scaffolds with 56- 61% porosity, with 40% of pores between 0-50µm, 60% of pores between 50-500µm (average pore size 349 µm), 99.9% pore interconnectivity and a permeability value of 16.8 x10-10m2. The average compressive strengths and compressive moduli of the natural polymer foam and marine sponge replicas were 2.46±1.43MPa/0.099±0.014GPa and 8.4±0.83MPa /0.16±0.016GPa respectively. Cytotoxic response proved encouraging for the HA Spongia agaricina scaffolds; after 7 days in culture medium the scaffolds exhibited endothelial cells (HUVEC and HDMEC) and osteoblast (MG63) attachment, proliferation on the scaffold surface and penetration into the pores. It is proposed that the use of Spongia agaricina as a precursor material allows for the reliable and repeatable production of ceramic-based 3-D tissue engineered scaffolds exhibiting the desired architectural and mechanical characteristics for use as a bone 3 scaffold material. Moreover, the Spongia agaricina scaffolds produced exhibit no adverse cytotoxic response.

Chemical and mechanical stability of sodium sulfate activated slag after exposure to elevated temperature

The chemical and mechanical stability of slag activated with two different concentrations of sodium sulfate (Na₂SO₄) after exposure to elevated temperatures ranging from 200 to 800 °C with an increment of 200 °C has been examined. Compressive strengths and pH of the hardened pastes before and after the exposure were determined. The various decomposition phases formed were identified using X-ray diffraction, thermogravimetric analysis and scanning electron microscopy. The results indicated that Na₂SO₄ activated slag has a better resistance to the degradation caused by exposure to elevated temperature up to 600 °C than Portland cement system as its relative strengths are superior. The finer slag and higher Na₂SO₄ concentration gave better temperature resistance. Whilst the pH of the hardened pastes decreased with an increase in temperature, it still maintained a sufficiently high pH for the protection of reinforcing bar against corrosion.

A review and psychometric evaluation of pregnancy-specific stress measures

Considerable evidence has accumulated on the association between pregnancy-specific stress and adverse birth outcomes with an increasing number of measures of pregnancy-specific stress being developed internationally. However, the introduction of these measures has not always been theoretically or psychometrically grounded, resulting in questions about the quality and direction of such research. This review summarizes evidence on the reliability and validity of pregnancy-specific stress measures identified between 1980 and October 2010. Fifteen pregnancy-specific stress measures were identified. Cronbach’s alpha coefficient ranged from 0.51–0.96 and predictive validity data on preterm birth were reported for five measures. Convergent validity data suggest that pregnancy-specific stress is related to, but distinct from, global stress. Findings from this review consolidate current knowledge on pregnancy-specific stress as a consistent predictor of premature birth. This review also advances awareness of the range of measures of pregnancy-specific stress and documents their strengths and limitations based on published reliability and validity data. Careful consideration needs to be given as to which measures to use in future research to maximize the development of stress theory in pregnancy and appropriate interventions for women who experience stress in pregnancy. An international, strategic collaboration is recommended to advance knowledge in this area of study.

Energy levels, wavefunction compositions and electric dipole transitions in neutral Ca

A configuration-interaction approach, based on the use of B-spline basis sets combined with a model potential including monoelectronic and dielectronic core polarization effects, is employed to calculate term energies and wavefunctions for neutral Ca. Results are reported for singlet and triplet bound states, and some quasi-bound states above the lowest ionization limit, with angular momentum up to L = 4. Comparison with experiment and with other theoretical results shows that this method yields the most accurate energy values for neutral Ca obtained to date. Wavefunction compositions, necessary for labelling the levels, and the effects of semi-empirical polarization potentials on the wavefunctions are discussed, as are some recent identifications of doubly-excited states. It is shown that taking into account dielectronic core polarization changes the energies of the lowest terms in Ca significantly, in general by a few hundred cm(-1), the effect decreasing rapidly for the higher bound states. For Rydberg states with n approximate to 7 the accuracy of the results is often better than a few cm(-1). For series members (or perturbers) with a pronounced 3d character the error can reach 150 cm(-1). The wavefunctions are used to calculate oscillator strengths and lifetimes for a number of terms and these are compared with existing measurements. The agreement is good but points to a need for improved measurements.

Cystic fibrosis research in allied health and nursing professions

This report is the result of the "Allied Health and Nursing Professions Working Group" meeting which took place in Verona, Italy, November 2009, which was organised by the European Cystic Fibrosis Society, and involved 32 experts. The meeting was designed to provide a "roadmap" of high priority research questions that can be addressed by Allied Health Professionals (AHP) and nursing. The other goal was to identify research skills that would be beneficial to AHP and nursing researchers and would ultimately improve the research capacity and capability of these professions. The following tasks were accomplished: 1) a Delphi survey was used to identify high priority research areas and themes, 2) common research designs used in AHP and nursing research were evaluated in terms of their strengths and weaknesses, 3) methods for assessing the clinimetric and psychometric properties, as well as feasibility, of relevant outcome measures were reviewed, and 4) a common skill set for AHPs and nurses undertaking clinical research was agreed on and will guide the planning of future research opportunities. This report has identified important areas and themes for future research which include: adherence; physical activity/exercise; nutritional interventions; interventions for the newborn with CF and evaluation of outcome measures for use in AHP and nursing research. It has highlighted the significant challenges AHPs and nurses experience in conducting clinical research, and proposes strategies to overcome these challenges. It is hoped that this report will encourage research initiatives that assess the efficacy/effectiveness of AHP and nursing interventions in order to improve the evidence base. This should increase the quality of research conducted by these professions, justify services they currently provide, and expand their skills in new areas, with the ultimate goal of improving care for patients with CF.

Enhancing social work students’ learning experience and readiness to undertake practice learning.

This project set out to evaluate the effectiveness of social work education by analysing student perceptions of the strengths and limitations of their education and training on the Bachelor of Social Work, Queen’s University, Belfast (QUB) at different stages of their ‘learning journey’ through the programme.
The author’s primary aim in undertaking this study was to contribute evidence-based understanding of the challenges and opportunities students identified themselves within contemporary practice environments. A secondary aim was to test the effectiveness of key approaches, theories and learning tools in common usage in social work education. The authors believe the outcomes generated by the project demonstrate the value of systematically researching student perceptions of their learning experience and feel the study provides important lessons which should help to inform the future development of social work education not only locally but in other parts of the UK.

A streamlined life-cycle assessment and decision tool for used tyres recycling

In order to achieve progress towards sustainable resource management, it is essential to evaluate options for the reuse and recycling of secondary raw materials, in order to provide a robust evidence base for decision makers. This paper presents the research undertaken in the development of a web-based decision-support tool (the used tyres resource efficiency tool) to compare three processing routes for used tyres compared to their existing primary alternatives. Primary data on the energy and material flows for the three routes, and their alternatives were collected and analysed. The methodology used was a streamlined life-cycle assessment (sLCA) approach. Processes included were: car tyre baling against aggregate gabions; car tyre retreading against new car tyres; and car tyre shred used in landfill engineering against primary aggregates. The outputs of the assessment, and web-based tool, were estimates of raw materials used, carbon dioxide emissions and costs. The paper discusses the benefits of carrying out a streamlined LCA and using the outputs of this analysis to develop a decision-support tool. The strengths and weakness of this approach are discussed and future research priorities identified which could facilitate the use of life cycle approaches by designers and practitioners.

A systematic review of systematic reviews to improve maternal mental health and well-being

Objective: to identify non-invasive interventions in the perinatal period that could enable midwives to offer effective support to women within the area of maternal mental health and well-being.

Methods: a total of 9 databases were searched: MEDLINE, PubMed, EBSCO (CINAHL/British Nursing Index), MIDIRS Online Database, Web of Science, The Cochrane library, CRD (NHS EED/DARE/HTA), Joanne Briggs Institute and EconLit. A systematic search strategy was formulated using key MeSH terms and related text words for midwifery, study aim, study design and mental health. Inclusion criteria were articles published from 1999 onwards, English language publications and articles originating from economically developed countries, indicated by membership of the Organisation for Economic Co-operation and Development (OECD). Data were independently extracted using a data collection form, which recorded data on the number of papers reviewed, time frame of the review, objectives, key findings and recommendations. Summary data tables were set up outlining key data for each study and findings were organised into related groups. The methodological quality of the reviews was assessed based on predefined quality assessment criteria for reviews.

Findings: 32 reviews were identified as examining interventions that could be used or co-ordinated by midwives in relation to some aspect of maternal mental health and well-being from the antenatal to the postnatal period and met the inclusion criteria. The review highlighted that based on current systematic review evidence it would be premature to consider introducing any of the identified interventions into midwifery training or practice. However there were a number of examples of possible interventions worthy of further research including midwifery led models of care in the prevention of postpartum depression, psychological and psychosocial interventions for treating postpartum depression and facilitation/co-ordination of parent-training programmes. No reviews were identified that supported a specific midwifery role in maternal mental health and well-being in pregnancy, and yet, this is the point of most intensive contact.

Key conclusions and implications for practice: This systematic review of systematic reviews provides a valuable overview of the current strengths and gaps in relation to maternal mental health interventions in the perinatal period. While there was little evidence identified to inform the current role of midwives in maternal mental health, the review provides the opportunity to reflect on what is achievable by midwives now and in the future and the need for high quality randomised controlled trials to inform a strategic approach to promoting maternal mental health in midwifery.

On the required shape corrections to the local density and generalized gradient approximations to the Kohn-Sham potentials for molecular response calculations of (hyper)polarizabilities and excitation energies

It is well known that shape corrections have to be applied to the local-density (LDA) and generalized gradient (GGA) approximations to the Kohn-Sham exchange-correlation potential in order to obtain reliable response properties in time dependent density functional theory calculations. Here we demonstrate that it is an oversimplified view that these shape corrections concern primarily the asymptotic part of the potential, and that they affect only Rydberg type transitions. The performance is assessed of two shape-corrected Kohn-Sham potentials, the gradient-regulated asymptotic connection procedure applied to the Becke-Perdew potential (BP-GRAC) and the statistical averaging of (model) orbital potentials (SAOP), versus LDA and GGA potentials, in molecular response calculations of the static average polarizability alpha, the Cauchy coefficient S-4, and the static average hyperpolarizability beta. The nature of the distortions of the LDA/GGA potentials is highlighted and it is shown that they introduce many spurious excited states at too low energy which may mix with valence excited states, resulting in wrong excited state compositions. They also lead to wrong oscillator strengths and thus to a wrong spectral structure of properties like the polarizability. LDA, Becke-Lee-Yang-Parr (BLYP), and Becke-Perdew (BP) characteristically underestimate contributions to alpha and S-4 from bound Rydberg-type states and overestimate those from the continuum. Cancellation of the errors in these contributions occasionally produces fortuitously good results. The distortions of the LDA, BLYP, and BP spectra are related to the deficiencies of the LDA/GGA potentials in both the bulk and outer molecular regions. In contrast, both SAOP and BP-GRAC potentials produce high quality polarizabilities for 21 molecules and also reliable Cauchy moments and hyperpolarizabilities for the selected molecules. The analysis for the N-2 molecule shows, that both SAOP and BP-GRAC yield reliable energies omega(i) and oscillator strengths f(i) of individual excitations, so that they reproduce well the spectral structure of alpha and S-4.(C) 2002 American Institute of Physics.

Validation of Next Generation Sequencing Technologies in Comparison to Current Diagnostic Gold Standards for BRAF, EGFR and KRAS Mutational Analysis

Next Generation Sequencing (NGS) has the potential of becoming an important tool in clinical diagnosis and therapeutic decision-making in oncology owing to its enhanced sensitivity in DNA mutation detection, fast-turnaround of samples in comparison to current gold standard methods and the potential to sequence a large number of cancer-driving genes at the one time. We aim to test the diagnostic accuracy of current NGS technology in the analysis of mutations that represent current standard-of-care, and its reliability to generate concomitant information on other key genes in human oncogenesis. Thirteen clinical samples (8 lung adenocarcinomas, 3 colon carcinomas and 2 malignant melanomas) already genotyped for EGFR, KRAS and BRAF mutations by current standard-of-care methods (Sanger Sequencing and q-PCR), were analysed for detection of mutations in the same three genes using two NGS platforms and an additional 43 genes with one of these platforms. The results were analysed using closed platform-specific proprietary bioinformatics software as well as open third party applications. Our results indicate that the existing format of the NGS technology performed well in detecting the clinically relevant mutations stated above but may not be reliable for a broader unsupervised analysis of the wider genome in its current design. Our study represents a diagnostically lead validation of the major strengths and weaknesses of this technology before consideration for diagnostic use.

Realist evaluation - promise, problems and practicalities

Realist evaluation is an innovative, multi-method approach to evaluating the effectiveness of complex health care interventions that is having an increasing impact on the research community. Drawing on their experience doing four realist evaluations in diverse areas of healthcare, the authors offer a comprehensive overview and critique of essential theory and practice. The first paper (Realist review and realist evaluation: an introduction) introduces the main components of the approach and shows how realist review can support realist evaluation. The second paper (Concepts and methodology for realist evaluation: help or hindrance?) provides further detail on the key concepts, shows how they can be operationalised, and discusses the advantages and difficulties of using these ideas. Following these two papers introducing and illustrating the major concepts, the third paper (Realist Evaluation: a critical realist critique) takes a step back to re-consider realist evaluation in relation to its critical realist roots, asking whether it leads to evaluators abandoning the attempt to understand (and if necessary challenge) the underlying values of health care interventions and contenting themselves merely with explicating the factors that help or hinder implementation. The fourth and final paper (Data analysis and theory development in realist evaluation) plunges back into the tangled undergrowth of multiple-method data collection and shows how disparate forms of data can be synthesised for theory development, and the results presented in a form that is useful to practitioners and policy-makers.

Selection and Treatment of Data for Radiocarbon Calibration: An Update to the International Calibration (IntCal) Criteria

High-quality data from appropriate archives are needed for the continuing improvement of radiocarbon calibration curves. We discuss here the basic assumptions behind 14C dating that necessitate calibration and the relative strengths and weaknesses of archives from which calibration data are obtained. We also highlight the procedures, problems and uncertainties involved in determining atmospheric and surface ocean 14C/12C in these archives, including a discussion of the various methods used to derive an independent absolute timescale and uncertainty. The types of data required for the current IntCal database and calibration curve model are tabulated with examples.

Models of Mental Health

A good understanding of the different theoretical models is essential when working in the field of mental health. Not only does it help with understanding experiences of mental health difficulties and to find meaning, but it also provides a framework for expanding our knowledge of the field.

As part of the Foundations of Mental Health Practice series, this book provides a critical overview of the theoretical perspectives relevant to mental health practice. At the core of this book is the idea that no single theory is comprehensive on its own and each theory has its limitations. Divided in to two parts, Part I explores traditional models of mental health and covers the key areas: bio-medical perspectives, psychological perspectives and social perspectives, whilst Part II looks at contemporary ideas that challenge and push these traditional views. The contributions, strengths and limitations of each model are explored and, as a result, the book encourages a more holistic, open approach to understanding and responding to mental health issues.

Together, these different approaches offer students and practitioners a powerful set of perspectives from which to approach their study and careers. Each model is covered in a clear and structured way with supporting exercises and case studies. It is an essential text for anyone studying or practising in the field of mental health, including social workers, nurses and psychologists.