US Patent: Method of manufacture of a composite concrete article

A method of manufacturing a composite concrete article comprising forming a textile structure, removing material from regions of the textile structure to create voids in the textile structure and incorporating the textile structure into a body of wet uncured concrete such that the concrete flows into the voids created in the textile structure, embedding the textile structure into the concrete, whereby the textile structure defines at least a portion of a surface of the cured concrete article.

The effect of manufacture and assembly joining methods on stiffened panel performance

This paper describes the simulation of representative aircraft wing stiffened panels under axial compression loading, to determine the effects of varying the manufacturing shape and assembly joining methods on stiffened panel performance. T-stiffened and Z-stiffened panels are modelled in Abaqus simulating integral, co-cured and mechanically fastened joints. The panels are subject to an edge compressive displacement along the stiffener axis until failure and the ultimate failure load and buckling performance is assessed for each. Integral panels consistently offer the highest performance. Co-cured panels demonstrate reduced performance (3-5% reduction in ultimate load relative to integral) caused by localised cohesive failure and skin-stiffener separation. The mechanically fastened panels are consistently the weakest joint (19-25% reduction in ultimate load relative to integral) caused primarily by inter-rivet buckling between fasteners

Developing an information booklet to meet the needs of intensive care patients and relatives

Changes in the economic climate and the delivery of health care require that pre-operative information programmes are effective and efficiently implemented. In order to be effective the pre-operative programme must meet the information needs of intensive care unit (ICU) patients and their relatives. Efficiency can be achieved through a structured pre-operative programme which provides a framework for teaching. The need to develop an ICU information booklet in a large teaching hospital in Northern Ireland has become essential to provide relevant information and improve the quality of service for patients and relatives, as set out in the White Paper, ‘Working for Patients’, (DoH, 1989). The first step in establishing a patient education programme was to ascertain patients' and relatives' informational needs. A ‘needs assessment’ identified the pre-operative information needs of ICU patients and their relatives (McGaughey, 1994) and the findings were used to plan and publish an information booklet. The ICU booklet provides a structure for pre-operative visits to ensure that patients and relatives information needs are met.

Microneedle arrays as transdermal and intradermal drug delivery systems: Materials science, manufacture and commercial development

Transdermal drug delivery offers a number of advantages for the patient, due not only its non-invasive and convenient nature, but also factors such as avoidance of first pass metabolism and prevention of gastrointestinal degradation. It has been demonstrated that microneedle arrays can increase the number of compounds amenable to transdermal delivery by penetrating the skin's protective barrier, the stratum corneum, and creating a pathway for drug permeation to the dermal tissue below. Microneedles have been extensively investigated in recent decades for drug and vaccine delivery as well as minimally invasive patient monitoring/diagnosis. This review focuses on a range of critically important aspects of microneedle technology, namely their material composition, manufacturing techniques, methods of evaluation and commercial translation to the clinic for patient benefit and economic return. Microneedle research and development is finally now at the stage where commercialisation is a realistic possibility. However, progress is still required in the areas of scaled-up manufacture and regulatory approval.

High volume fabrication of laser targets using MEMS techniques

The latest techniques for the fabrication of high power laser targets, using processes developed for the manufacture of Micro-Electro-Mechanical System (MEMS) devices are discussed. These laser targets are designed to meet the needs of the increased shot numbers that are available in the latest design of laser facilities. Traditionally laser targets have been fabricated using conventional machining or coarse etching processes and have been produced in quantities of 10s to low 100s. Such targets can be used for high complexity experiments such as Inertial Fusion Energy (IFE) studies and can have many complex components that need assembling and characterisation with high precision. Using the techniques that are common to MEMS devices and integrating these with an existing target fabrication capability we are able to manufacture and deliver targets to these systems. It also enables us to manufacture novel targets that have not been possible using other techniques. In addition, developments in the positioning systems that are required to deliver these targets to the laser focus are also required and a system to deliver the target to a focus of an F2 beam at 0.1Hz is discussed.

“I am in a constant state of insecurity trying to make ends meet, like our service users”: Shared austerity reality between social workers and service users: Towards a preliminary conceptualization

This article introduces the concept of an emerging shared austerity reality, which refers to the socio-economic context of austerity that is shared both by social workers and service users, albeit to different degrees. Traditionally, the concept of the shared reality has been utilized to encompass the experiences of welfare professionals working in situations where both they and service users are exposed to the adverse effects of a natural disaster, war or terrorist attack. Here, the concept of shared reality is expanded through the introduction of the context of austerity. Drawing on 21 in-depth interviews with public sector social work practitioners in Greece it discusses, among other things, social anxieties about their children’s future, and their inability to take care of their elderly relatives that suggest an emerging shared austerity reality, reflecting the deterioration of socio-economic conditions. The paper ends with a discussion about the possibilities of alliance and division that emerge from the concept and future research directions. Moreover, it concludes with a reflection on the role of the social work profession and recent political developments in Greece in anti-austerity struggles.