Arsenic mobilization from iron oxyhydroxides is regulated by organic matter carbon to nitrogen (C:N) ratio

Arsenic (As) is mobilized from delta and floodplain aquifer sediments throughout S.E. Asia via reductive dissolution of As bound to iron (Fe) oxyhydroxides. The reductive driving force is organic carbon, but its source and constitution is uncertain. Here batch incubation experiments were conducted to investigate the role of organic matter (OM) carbon:nitrogen (C:N) ratio on the mobilization of arsenic, Fe and N from As dosed, Fe oxyhydroxide coated sands. As mobilization into pore waters from the sand was strongly regulated by the C:N ratio of the OM, and also the concentration of OM present. The lower the C:N, the more As released. Fe and ammonium release were similarly dependent on the quality and quantity of OM, but Fe mobilization was more rapid and ammonium release slower than As suggesting that the mobilization of these 3 moieties although interdependent, were not directly linked. It was concluded that low C:N ratios for OM responsible for reducing aquifers were As in groundwater is observed were likely.

Second-to-Fourth Digit Ratio and Impulsivity: A Comparison between Offenders and Nonoffenders

Personality characteristics, particularly impulsive tendencies, have long been conceived as the primary culprit in delinquent behavior. One crucial question to emerge from this line of work is whether impulsivity has a biological basis. To test this possibility, 44 male offenders and 46 nonoffenders completed the Eysenck Impulsivity Questionnaire, and had their 2D:4D ratio measured. Offenders exhibited smaller right hand digit ratio measurements compared to non-offenders, but higher impulsivity scores. Both impulsivity and 2D:4D ratio measurements significantly predicted criminality (offenders vs. nonoffenders). Controlling for education level, the 2D:4D ratio measurements had remained a significant predictor of criminality, while impulsivity scores no longer predicted criminality significantly. Our data, thus, indicates that impulsivity but not 2D:4D ratio measurements relate to educational attainment. As offenders varied in their number of previous convictions and the nature of their individual crimes, we also tested for differences in 2D:4D ratio and impulsivity among offenders. Number of previous convictions did not correlate significantly with the 2D:4D ratio measurements or impulsivity scores. Our study established a link between a biological marker and impulsivity among offenders (and lack thereof among non-offenders), which emphasise the importance of studying the relationship between biological markers, impulsivity and criminal behavior.

Prospective, Randomized Assessment of Transfer of Training (ToT) and Transfer Effectiveness Ratio (TER) of Virtual Reality Simulation Training for Laparoscopic Skill Acquisition

OBJECTIVES:: We assessed the effectiveness of ToT from VR laparoscopic simulation training in 2 studies. In a second study, we also assessed the TER. ToT is a detectable performance improvement between equivalent groups, and TER is the observed percentage performance differences between 2 matched groups carrying out the same task but with 1 group pretrained on VR simulation. Concordance between simulated and in-vivo procedure performance was also assessed. DESIGN:: Prospective, randomized, and blinded. PARTICIPANTS:: In Study 1, experienced laparoscopic surgeons (n = 195) and in Study 2 laparoscopic novices (n = 30) were randomized to either train on VR simulation before completing an equivalent real-world task or complete the real-world task only. RESULTS:: Experienced laparoscopic surgeons and novices who trained on the simulator performed significantly better than their controls, thus demonstrating ToT. Their performance showed a TER between 7% and 42% from the virtual to the real tasks. Simulation training impacted most on procedural error reduction in both studies (32- 42%). The correlation observed between the VR and real-world task performance was r > 0·96 (Study 2). CONCLUSIONS:: VR simulation training offers a powerful and effective platform for training safer skills.

Genetic association suggests that SMOC1 mediates between prenatal sex hormones and digit ratio

Men and women differ statistically in the relative lengths of their index and ring fingers; and the ratio of these lengths has been used as a biomarker for prenatal testosterone. The ratio has been correlated with a wide range of traits and conditions including prostate cancer, obesity, autism, ADHD, and sexual orientation. In a genome-wide association study of 979 healthy adults, we find that digit ratio is strongly associated with variation upstream of SMOC1 (rs4902759: P = 1.41 × 10(-8)) and a meta-analysis of this and an independent study shows a probability of P = 1.5 × 10(-11). The protein encoded by SMOC1 has recently been shown to play a critical role in limb development; its expression in prostate tissue is dependent on sex hormones, and it has been implicated in the sexually dimorphic development of the gonads. We put forward the hypothesis that SMOC1 provides a link between prenatal hormone exposure and digit ratio.

PtRuO/Ti anodes with a varying Pt:Ru ratio for direct methanol fuel cells

PtRuO/Ti anodes with a varying Pt:Ru ratio were prepared by thermal deposition of a PtRuO catalyst layer onto a Ti mesh for the direct methanol fuel cell (DMFC). The morphology and structure of the catalyst layers were analyzed by SEM, EDX, and XRD. The catalyst coating layers became porous with increase of the Ru content, and showed oxide and alloy characteristics. The relative activities of the PtRuO/Ti electrodes were assessed and compared using half-cell tests and single DMFC experiments. The results showed that these electrodes were very active for the methanol oxidation and that the optimum Ru surface coverage was ca. 38% for a DMFC operating at 20-60 °C. © 2006 Elsevier B.V. All rights reserved.

PtRu/Ti anodes with varying Pt:Ru ratio prepared by electrodeposition for the direct methanol fuel cell

PtRu/Ti anodes with varying Pt : Ru ratio were prepared by electrodeposition of a thin PtRu catalyst layer onto Ti mesh for a direct methanol fuel cell (DMFC). The morphology and structure of the catalyst layers were analyzed by SEM, EDX and XRD. The catalyst coating layer shows an alloy character. The relative activities of the PtRu/Ti electrodes were assessed and compared in half cell and single DMFC experiments. The results show that these electrodes are very active for the methanol oxidation and that the optimum Ru surface coverage was ca. 9 at.% for DMFC operating at 20°C and 11 at.% at 60°C. The PtRu/Ti anode shows a performance comparable to that of the conventional carbon-based anode in a DMFC operating with 0.25 M or 0.5 M methanol solution and atmosphere oxygen gas at 90°C. © the Owner Societies 2006.

Determination of geographical origin of distillers dried grains and solubles using isotope ratio mass spectrometry

In recent years distillers dried grains and solubles (DDGS), co-products of the bio-ethanol and beverages industries, have become globally traded commodity for the animal feed sector. As such it is becoming increasingly important to be able to trace the geographical origin of commodities in case of a contamination incident or authenticity issue arise. In this study, 137 DDGS samples from a range of different geographical origins (China, USA, Canada and European Union) were collected and analyzed. Isotope ratio mass spectrometry (IRMS) was used to analyze the DDGS for ²H/¹H, ¹³C/¹²C, ¹⁵N/¹⁴N, ¹⁸O/¹⁶O and ³⁴S/³²S isotope ratios which can vary depending on geographical origin and processing. Univariate and multivariate statistical techniques were employed to investigate the feasibility of using the IRMS data to determine botanical and geographical origin of the DDGS. The results indicated that this commodity could be differentiated according to their place of origin by the analysis of stable isotopes of hydrogen, carbon, nitrogen and oxygen but not with sulfur. By adding data to the models produced in this study, potentially an isotope databank could be set up for traceability procedures for DDGS, similar to the one established already for wine which will help in feed and food security issues arising worldwide.

The effect of variability in the powder/liquid ratio on the strength of zinc phosphate cement

Aim. To investigate (a) variability in powder/liquid proportioning and (b) effect of variability on diametral tensile strength (DTS), in a zinc phosphate cement. Statistical analyses (α = 0.05) were by Student's t-test in the case of powder/liquid ratio and one-way ANOVA and Tukey HSD for pair-wise comparisons of mean DTS. The Null hypotheses were that (a) the powder-liquid mixing ratios would not differ from the manufacturer's recommended ratio (b) DTS of the set cement samples using the extreme powder/liquid ratios would not differ from those made using the recommended ratio. 

Methodology. 34 dental students dispensed the components according to the manufacturer's instructions. The maximum and minimum powder/liquid ratios, together with the manufacturer's recommended ratio, were used to prepare samples for DTS testing. 

Results. Powder/liquid ratios ranged from 2.386 to 1.018. The mean ratio (1.644) was not significantly different from the recommended value of 1.718 (P = 0.189). DTS values for the maximum and minimum ratios were both significantly different from each other (P < 0.001) and from the mean value obtained from the recommended ratio (P < 0.001). 

Conclusions. Variability exists in powder/liquid ratio for hand dispensed zinc phosphate cement. This variability can affect the DTS of the set material.

Method for separating emulsions.

A method for breaking an emulsion of an ionic liq. which is a salt that is in the liq. state at a temp. below 1500°, and an oil, comprising the steps of (a) irradiating the emulsion with microwave radiation; (b) sepg. the emulsion into an ionic liq. phase and an oil phase; and (c) recovering at least one of the phases. The microwave radiation may occur in the presence of an addnl. heating source, an electrostatic field, an acoustic field, or a combination thereof. [on SciFinder(R)]