Connected Life Courses:Influences on and Experiences of 'Midlife' In-Migration to Rural Areas

This paper aims to contribute to the theorisation of midlife migration into rural areas. Although the factors influencing migration are known to be variable at different stages of a person's life, much less well understood is how migration decisions at different stages of the life course are connected and how post-migration experiences may be influenced by an earlier life course stage. We argue that midlife migration decisions are the product of the migrant's lifetime experiences and influences up until that stage in their life alongside their expectations and aspirations for future life course stages. Using a case study of the Glens of Antrim (Northern Ireland), this paper specifically demonstrates the role of childhood memories to explain midlife migration to a rural area. In doing so, it argues that some findings more commonly associated with second-generation transnational migration are also equally relevant to migration within the UK. Roots migration and place attachment alongside the midlife migrant's post-migration sense of belonging and permanency are found to be influenced by the migrant's earlier memories, behaviours, and experiences.

Header design for flow equalization in microstructured reactors

To enhance the uniformity of fluid flow distribution in microreactors, a header configuration consisting of a cone diffuser connected to a thick-walled screen has been proposed. The thick-walled screen consists of two sections: the upstream section constitutes a set of elongated parallel upstream channels and the downstream section constitutes a set of elongated parallel downstream channels positioned at an angle of 90 with respect to the upstream channels. In this approach the problem of flow, equalization reduces to that of flow equalization in the first and second downstream channels of the thick-walled screen. In turn, this requires flow equalization in the corresponding cross sections of the upstream channels. The computational fluid dynamics analysis of the fluid flow maldistribution shows that eight parallel upstream channels with a width of 300-600 pm are required per 1 cm of length for flow equalization. The length to width ratio of these channels has to be > 15. The numerical results suggest that the proposed header-configuration can effectively improve the performance of the downstream microstructured devices, decreasing the ratio of the maximum flow velocity to the mean flow velocity from 2 to 1.005 for a wide range of Reynolds numbers (0.5-10). 2006 American Institute of Chemical Engineers AlChE J, 53: 28-38, 2007.

1D-Leaky Wave Antenna Employing Parallel-Plate Waveguide Loaded With PRS and HIS

A new type of one-dimensional leaky-wave antenna (LWA) with independent control of the beam-pointing angle and beamwidth is presented. The antenna is based on a simple structure composed of a bulk parallel-plate waveguide (PPW) loaded with two printed circuit boards (PCBs), each one consisting of an array of printed dipoles. One PCB acts as a partially reflective surface (PRS), and the other grounded PCB behaves as a high impedance surface (HIS). It is shown that an independent control of the leaky-mode phase and leakage rate can be achieved by changing the lengths of the PRS and HIS dipoles, thus resulting in a flexible adjustment of the LWA pointing direction and directivity. The leaky-mode dispersion curves are obtained with a simple Transverse Equivalent Network (TEN), and they are validated with three-dimensional full-wave simulations. Experimental results on fabricated prototypes operating at 15 GHz are reported, demonstrating the versatile and independent control of the LWA performance by changing the PRS and HIS parameters.

Comparison of parallel and perpendicular polarized counterpropagating light for suppressing high harmonic generation

The use of counterpropagating laser pulses to suppress high harmonic generation (HHG) is investigated experimentally for pulses polarized parallel or perpendicular to the driving laser pulse. It is shown for the first time that perpendicularly polarized pulses can suppress HHG. The intensity of the counterpropagating pulse required for harmonic suppression is found to be much larger for perpendicular polarization than for parallel polarization, in good agreement with simple models of the harmonic suppression. These results have applications to quasi-phase-matching of HHG with trains of counterpropagating pulses. (C) 2007 Optical Society of America.

Design criteria for a barrier-based gas-liquid flow distributor for parallel microchannels

This paper presents criteria for the design of a flow distributor for even distribution of gas and liquid flows over parallel microchannels. The design criteria are illustrated for the case of a nitrogen-water Taylor flow (1

Asymptotic modeling of short plane-parallel high-pressure glow discharge

Here a self-consistent continuum model is presented for a narrow gap plane-parallel dc glow discharge. The set of governing equations consisting of continuity and momentum equations for positive ions, fast (emitted by the cathode) and slow electrons (generated by fast electron impact ionization) coupled with Poisson's equation is treated by the technique of matched asymptotic expansions. Explicit results are obtained in the asymptotic limit: (chi delta) much less than 1, where chi = e Phi(a)/kT, delta = (r(D)/L)(2) (Phi(a) is the applied voltage, r(D) is the Debye radius) and pL much greater than 1(Hg mm cm), where p is the gas pressure and L is the gap length. In the case of high pressure, the electron energy relaxation length is much smaller than the gap length, and so the local field approximation is valid. The discharge space divides naturally into a cathode fall sheath, a quasineutral plasma region, and an anode fall sheath. The electric potential distribution obtained for each region in a (semi)analytical form is asymptotically matched to the adjoining regions in the region of overlap. The effects of the gas pressure, gap length, and applied voltage on the length of each region are investigated. (C) 2000 American Institute of Physics. [S1070-664X(00)01302-1].

Parallel Peptidome and Transcriptome Analyses of Amphibian Skin Secretions Using Archived Frozen Acid-Solvated Samples

Amphibian skin secretions are unique sources of bioactive peptides and their donor species are currently rapidly disappearing from the biosphere. Here, we report that both peptides and polyadenylated mRNAs from skin granular glands remain amenable to study in samples of stimulated skin secretions following their storage in 0.1 % aqueous trifluoroacetic acid at -20 °C for many years. Frozen acidified solutions of toad (Bombina variegata) skin secretions, stored for 12 years, were thawed and samples removed for direct reverse phase HPLC fractionation. Additional samples were removed, snap frozen and lyophilised for construction of cDNA libraries following polyadenylated mRNA capture using magnetic oligo-dT beads and reverse transcription. Using the bombesin and bradykinin peptides found in bombinid toad skin as models, individual variant peptides of each type were located in reverse phase HPLC fractions and their corresponding biosynthetic precursor-encoding mRNA transcripts were cloned from the cDNA library using a RACE PCR strategy. This study illustrates unequivocally that both amphibian skin secretion peptides and their biosynthetic precursor-encoding polyadenylated mRNAs are stable in frozen acid-solvated skin secretion samples for considerable periods of time-a finding that may have fundamental implications in the study of archived materials but also in the wider field of molecular biology.

Pull-out behaviour of axially loaded basalt fibre reinforced polymer (BFRP) rods bonded parallel to the grain of glulam elements

Synopsis: Bonded-in rod timber joints off er several advantages over conventional types of joint, including high local force transfer, very stiff connections, and improved ?re and aesthetic properties since the connection is completely hidden in the insulating timber members. More recently, the use of ?bre reinforced polymer (FRP) as a connecting rod, alternative to steel rods, in bonded-in rod connections for timber structures has been investigated. However, the investigation into the behaviour of such joints is limited, in particular, connections involving basalt ?bre reinforced polymers (BFRP) bars - which is the primary focus of this research. This paper presents an experimental programme conducted to investigate the behaviour of bonded-in BFRP bars loaded parallel to the grain of glulam members. Tensile pull-out tests were conducted to examine the effect of bonded length and bond stress-slip on the structural capacity of the connection. An analytical design expression for predicting pull-out capacity is proposed and the results have been compared with some established design equations. It was found that pull-out load increased approximately linearly with the bonded length, up to maximum which occurred at a bonded length of 15 times the hole diameter, and did not increase beyond this bonded length. The most signi?cant failure modes were failure at the timber/adhesive interface followed by pullout of the BFRP rod. Increased bonded lengths resulted in higher bond slip values compared to lower equivalent bonded lengths. The proposed design model gave the best predictions of pull-out capacity compared with other existing models.