Improved shear strength model for FRP-strengthened RC beams accounting for adverse FRP-steel interaction

RC beams shear-strengthened with externally-bonded FRP side strips or U-strips usually fail by debonding. As such debonding occurs in a brittle manner at relatively small shear crack widths, some of the internal steel stirrups may not have reached yielding at beam shear failure. Consequently, the internal steel stirrups cannot be fully utilized. This adverse shear interaction between internal steel stirrups and external FRP strips may significantly reduce the benefit of shear-strengthening FRP but has not been considered by any of the existing FRP strengthening design guidelines. In this paper, an improved shear strength model capable of accounting for the effect of the above shear interaction is first presented, in which the unfavorable effect of shear interaction is reflected through a reduction factor (i.e. shear interaction factor). Using a large test database established in the present study, the performance of the proposed model as well as that of three other shear strength models is then assessed. This assessment shows that the proposed shear strength model performs better than the three existing models. The assessment also shows that the inclusion of the proposed shear interaction factor in the existing models can significantly improve their performance.

Effects of unconfined concrete strength on FRP confinement of concrete

Research has shown that fibre reinforced polymer (FRP) wraps are effective for strengthening concrete columns for increased axial and flexural load and deformation capacity, and this technique is now used around the world. The experimental study presented in this paper is focused on the mechanics of FRP confined concrete, with a particular emphasis on the influence of the unconfined concrete compressive strength on confinement effectiveness and hoop strain efficiency. An experimental programme was undertaken to study the compressive strength and stress-strain behaviour of unconfined and FRP confined concrete cylinders of different concrete strength but otherwise similar mix designs, aggregates, and constituents. This was accomplished by varying only the water-to-cement ratio during concrete mixing operations. Through the use of high-resolution digital image correlation to measure both axial and hoop strains, the observations yield insights into the mechanics of FRP confinement of concretes of similar composition but with varying unconfined concrete compressive strength.

Novel manually made NSM FRP (MMFRP) bars for shear strengthening of RC beams

This paper presents an experimental study evaluating the effectiveness of the Near Surface Mounted (NSM) technique with innovative manually made FRP bars (MMFRP) for shear strengthening of RC beams. RC beams designed to fail in shear were tested in three-point bending. To delay the onset of MMFRP bar debonding, a new anchorage is also developed and tested. This paper reports the results of a series of tests on simply supported rectangular RC beams, strengthened in shear with MMFRP bar either with or without the proposed anchorage. The load-deflection responses of all test beams are plotted, in addition to selected strain results. Performance and the failure modes of the test beams are presented and discussed in this paper. The proposed MMFRP bars and end anchorage enhanced the shear capacity between 25 to 48% over the control specimen. Furthermore, the adoption of the proposed end anchorage of MMFRP bars significantly enhanced the ductility of the test specimens.

Risk-aware Planning in BDI Agents

The ability of an autonomous agent to select rational actions is vital in enabling it to achieve its goals. To do so effectively in a high-stakes setting, the agent must be capable of considering the risk and potential reward of both immediate and future actions. In this paper we provide a novel method for calculating risk alongside utility in online planning algorithms. We integrate such a risk-aware planner with a BDI agent, allowing us to build agents that can set their risk aversion levels dynamically based on their changing beliefs about the environment. To guide the design of a risk-aware agent we propose a number of principles which such an agent should adhere to and show how our proposed framework satisfies these principles. Finally, we evaluate our approach and demonstrate that a dynamically risk-averse agent is capable of achieving a higher success rate than an agent that ignores risk, while obtaining a higher utility than an agent with a static risk attitude.

Modelling Duqu 2.0 Malware using Attack Trees with Sequential Conjunction

In this paper we identify requirements for choosing a threat modelling formalisation for modelling sophisticated malware such as Duqu 2.0. We discuss the gaps in current formalisations and propose the use of Attack Trees with Sequential Conjunction when it comes to analysing complex attacks. The paper models Duqu 2.0 based on the latest information sourced from formal and informal sources. This paper provides a well structured model which can be used for future analysis of Duqu 2.0 and related attacks.

IEEE C37.118-2 Synchrophasor Communication Framework

Synchrophasors have become an important part of the modern power system and numerous applications have been developed covering wide-area monitoring, protection and control. Most applications demand continuous transmission of synchrophasor data across large geographical areas and require an efficient communication framework. IEEE C37.118-2 evolved as one of the most successful synchrophasor communication standards and is widely adopted. However, it lacks a predefined security mechanism and is highly vulnerable to cyber attacks. This paper analyzes different types of cyber attacks on IEEE C37.118-2 communication system and evaluates their possible impact on any developed synchrophasor application. Further, the paper also recommends an efficent security mechanism that can provide strong protection against cyber attacks. Although, IEEE C37.118-2 has been widely adopted, there is no clear understanding of the requirements and limitations. To this aim, the paper also presents detailed performance evaluation of IEEE C37.118-2 implementations which could help determine required resources and network characteristics before designing any synchrophasor application.

Contextual Intrusion Alerts for SCADA Networks

The complexity of modern SCADA networks and their associated cyber-attacks requires an expressive but flexible manner for representing both domain knowledge and collected intrusion alerts with the ability to integrate them for enhanced analytical capabilities and better understanding of attacks. This paper proposes an ontology-based approach for contextualized intrusion alerts in SCADA networks. In this approach, three security ontologies were developed to represent and store information on intrusion alerts, Modbus communications, and Modbus attack descriptions. This information is correlated into enriched intrusion alerts using simple ontology logic rules written in Semantic Query-Enhanced Web Rules (SQWRL). The contextualized alerts give analysts the means to better understand evolving attacks and to uncover the semantic relationships between sequences of individual attack events. The proposed system is illustrated by two use case scenarios.

k-fold Subsampling based Sequential Backward Feature Elimination

We present a new wrapper feature selection algorithm for human detection. This algorithm is a hybrid featureselection approach combining the benefits of filter and wrapper methods. It allows the selection of an optimalfeature vector that well represents the shapes of the subjects in the images. In detail, the proposed featureselection algorithm adopts the k-fold subsampling and sequential backward elimination approach, while thestandard linear support vector machine (SVM) is used as the classifier for human detection. We apply theproposed algorithm to the publicly accessible INRIA and ETH pedestrian full image datasets with the PASCALVOC evaluation criteria. Compared to other state of the arts algorithms, our feature selection based approachcan improve the detection speed of the SVM classifier by over 50% with up to 2% better detection accuracy.Our algorithm also outperforms the equivalent systems introduced in the deformable part model approach witharound 9% improvement in the detection accuracy

Coelum non animum muto? Milton's Neo-Latin Poetry and Catholic Italy

Milton’s Elegiarum Liber, the first half of his Poemata published in Poems of Mr John Milton Both English and Latin (1645), concludes with a series of eight Latin epigrams: five bitterly anti-Catholic pieces on the failed Gunpowder Plot of 1605, followed by three encomiastic poems hymning the praises of an Italian soprano, Leonora Baroni, singing in Catholic Rome. The disparity in terms of subject matter and tone is self-evident yet surprising in an epigrammatic series that runs sequentially. Whereas the gunpowder epigrams denigrate Rome, the Leonora epigrams present the city as a cultured hub of inclusivity, the welcome host of a Neapolitan soprano. In providing the setting for a human song that both enthrals its audience and attests to the presence of a divine power, Rome now epitomizes something other than brute idolatry, clerical habit or doctrine. And for the poet this facilitates an interrogation of theological (especially Catholic) doctrines. Coelum non animum muto, dum trans mare curro wrote the homeward-bound Milton in the autograph book of Camillo Cardoini at Geneva on 10 June 1639. But that this was an animus that could indeed acclimatize to religious and cultural difference is suggested by the Latin poems which Milton “patch [ed] up” in the course of his Italian journey. Central to that acclimatisation, as this chapter argues, is Milton’s quasi-Catholic self-fashioning. Thus Mansus offers a poetic autobiography of sorts, a self-inscribed vita coloured by intertextually kaleidoscopic links with two Catholic poets of Renaissance Italy and their patron; Ad Leonoram 1 both invokes and interrogates Catholic doctrine before a Catholic audience only to view the whole through the lens of a neo-Platonic hermeticism that may refreshingly transcend religious difference. Finally, Epitaphium Damonis, composed upon Milton’s return home, seems to highlight the potential interconnectedness of Protestant England and Catholic Italy, through the Anglo-Italian identity of its deceased subject, and through a pseudo-monasticism suggested by the poem’s possible engagement with the hagiography of a Catholic Saint. Perhaps continental travel and the physical encounter with the symbols, personages and institutions of the other have engendered in the Milton of the Italian journey a tolerance or, more accurately, the manipulation of a seeming tolerance to serve poetic and cultural ends.


First reviewer:
Haan: a fine piece by the senior neo-Latinist in Milton studies.

Second reviewer:
Chapter 7 is ... a high-spot of the collection. Its argument that in his Latin poetry Milton’s is a ‘quasi-Catholic self-fashioning’ stressing ‘the potential interconnectedness of Protestant England and Catholic Italy’ is striking and is advanced with learning, clarity and insight. Its sensitive exploration of the paradox of Milton’s coupling of humanistically complimentary and tolerant address to Roman Catholic friends with fiercely Protestant partisanship demonstrates that there is much greater complexity to his poetic persona than the self-construction and self-presentation of the later works would suggest. The essay is always adroit and sure-footed, often critically acute and illuminating (as, for example, in its discussion of the adjective and adverb mollis and molliter in Mansus, or in the identification in n. 99 of hitherto unnoticed Virgilian echoes). It has the added merits of being very well written, precise and apt in its citation of evidence, and absolutely central to the concerns of the volume.