Strengthening timber beams with near surface mounted carbon fiber reinforced polymer rods

Many timber structures may require strengthening due to either decay and aging or an increase of load. This paper presents an experimental study in which eleven timber beams were tested, including three unstrengthened reference beams and eight beams strengthened with NSM CFRP bars. The test parameters include the position of NSM (tensile face or the bottom of the sides), the number of CFRP bars (1 or 2), and additional anchorage of NSM CFRP bars (steel wire U anchors or CFRP U strips). The test results show that the ultimate flexural strength of the timber beams were increased by 14%∼85% with an average of 47% due to NSM CFRP bar strengthening. Their deflection corresponding to the peak load was increased by 33% in average.

Improved shear strength model for FRP-strengthened RC beams accounting for adverse FRP-steel interaction

RC beams shear-strengthened with externally-bonded FRP side strips or U-strips usually fail by debonding. As such debonding occurs in a brittle manner at relatively small shear crack widths, some of the internal steel stirrups may not have reached yielding at beam shear failure. Consequently, the internal steel stirrups cannot be fully utilized. This adverse shear interaction between internal steel stirrups and external FRP strips may significantly reduce the benefit of shear-strengthening FRP but has not been considered by any of the existing FRP strengthening design guidelines. In this paper, an improved shear strength model capable of accounting for the effect of the above shear interaction is first presented, in which the unfavorable effect of shear interaction is reflected through a reduction factor (i.e. shear interaction factor). Using a large test database established in the present study, the performance of the proposed model as well as that of three other shear strength models is then assessed. This assessment shows that the proposed shear strength model performs better than the three existing models. The assessment also shows that the inclusion of the proposed shear interaction factor in the existing models can significantly improve their performance.

Effects of unconfined concrete strength on FRP confinement of concrete

Research has shown that fibre reinforced polymer (FRP) wraps are effective for strengthening concrete columns for increased axial and flexural load and deformation capacity, and this technique is now used around the world. The experimental study presented in this paper is focused on the mechanics of FRP confined concrete, with a particular emphasis on the influence of the unconfined concrete compressive strength on confinement effectiveness and hoop strain efficiency. An experimental programme was undertaken to study the compressive strength and stress-strain behaviour of unconfined and FRP confined concrete cylinders of different concrete strength but otherwise similar mix designs, aggregates, and constituents. This was accomplished by varying only the water-to-cement ratio during concrete mixing operations. Through the use of high-resolution digital image correlation to measure both axial and hoop strains, the observations yield insights into the mechanics of FRP confinement of concretes of similar composition but with varying unconfined concrete compressive strength.

Novel manually made NSM FRP (MMFRP) bars for shear strengthening of RC beams

This paper presents an experimental study evaluating the effectiveness of the Near Surface Mounted (NSM) technique with innovative manually made FRP bars (MMFRP) for shear strengthening of RC beams. RC beams designed to fail in shear were tested in three-point bending. To delay the onset of MMFRP bar debonding, a new anchorage is also developed and tested. This paper reports the results of a series of tests on simply supported rectangular RC beams, strengthened in shear with MMFRP bar either with or without the proposed anchorage. The load-deflection responses of all test beams are plotted, in addition to selected strain results. Performance and the failure modes of the test beams are presented and discussed in this paper. The proposed MMFRP bars and end anchorage enhanced the shear capacity between 25 to 48% over the control specimen. Furthermore, the adoption of the proposed end anchorage of MMFRP bars significantly enhanced the ductility of the test specimens.

Risk-aware Planning in BDI Agents

The ability of an autonomous agent to select rational actions is vital in enabling it to achieve its goals. To do so effectively in a high-stakes setting, the agent must be capable of considering the risk and potential reward of both immediate and future actions. In this paper we provide a novel method for calculating risk alongside utility in online planning algorithms. We integrate such a risk-aware planner with a BDI agent, allowing us to build agents that can set their risk aversion levels dynamically based on their changing beliefs about the environment. To guide the design of a risk-aware agent we propose a number of principles which such an agent should adhere to and show how our proposed framework satisfies these principles. Finally, we evaluate our approach and demonstrate that a dynamically risk-averse agent is capable of achieving a higher success rate than an agent that ignores risk, while obtaining a higher utility than an agent with a static risk attitude.

Modelling Duqu 2.0 Malware using Attack Trees with Sequential Conjunction

In this paper we identify requirements for choosing a threat modelling formalisation for modelling sophisticated malware such as Duqu 2.0. We discuss the gaps in current formalisations and propose the use of Attack Trees with Sequential Conjunction when it comes to analysing complex attacks. The paper models Duqu 2.0 based on the latest information sourced from formal and informal sources. This paper provides a well structured model which can be used for future analysis of Duqu 2.0 and related attacks.

IEEE C37.118-2 Synchrophasor Communication Framework

Synchrophasors have become an important part of the modern power system and numerous applications have been developed covering wide-area monitoring, protection and control. Most applications demand continuous transmission of synchrophasor data across large geographical areas and require an efficient communication framework. IEEE C37.118-2 evolved as one of the most successful synchrophasor communication standards and is widely adopted. However, it lacks a predefined security mechanism and is highly vulnerable to cyber attacks. This paper analyzes different types of cyber attacks on IEEE C37.118-2 communication system and evaluates their possible impact on any developed synchrophasor application. Further, the paper also recommends an efficent security mechanism that can provide strong protection against cyber attacks. Although, IEEE C37.118-2 has been widely adopted, there is no clear understanding of the requirements and limitations. To this aim, the paper also presents detailed performance evaluation of IEEE C37.118-2 implementations which could help determine required resources and network characteristics before designing any synchrophasor application.

Contextual Intrusion Alerts for SCADA Networks

The complexity of modern SCADA networks and their associated cyber-attacks requires an expressive but flexible manner for representing both domain knowledge and collected intrusion alerts with the ability to integrate them for enhanced analytical capabilities and better understanding of attacks. This paper proposes an ontology-based approach for contextualized intrusion alerts in SCADA networks. In this approach, three security ontologies were developed to represent and store information on intrusion alerts, Modbus communications, and Modbus attack descriptions. This information is correlated into enriched intrusion alerts using simple ontology logic rules written in Semantic Query-Enhanced Web Rules (SQWRL). The contextualized alerts give analysts the means to better understand evolving attacks and to uncover the semantic relationships between sequences of individual attack events. The proposed system is illustrated by two use case scenarios.

k-fold Subsampling based Sequential Backward Feature Elimination

We present a new wrapper feature selection algorithm for human detection. This algorithm is a hybrid featureselection approach combining the benefits of filter and wrapper methods. It allows the selection of an optimalfeature vector that well represents the shapes of the subjects in the images. In detail, the proposed featureselection algorithm adopts the k-fold subsampling and sequential backward elimination approach, while thestandard linear support vector machine (SVM) is used as the classifier for human detection. We apply theproposed algorithm to the publicly accessible INRIA and ETH pedestrian full image datasets with the PASCALVOC evaluation criteria. Compared to other state of the arts algorithms, our feature selection based approachcan improve the detection speed of the SVM classifier by over 50% with up to 2% better detection accuracy.Our algorithm also outperforms the equivalent systems introduced in the deformable part model approach witharound 9% improvement in the detection accuracy

'That Puissant City': John Milton's Roman Sojourns 1638-1639

John Milton’s sojourns in Rome (1638-9) are attested by his comments in Defensio Secunda, by the minutes of the English College, by Latin encomia which he received from Roman academicians, and, not least, by his Latin letter to Lucas Holstenius (19/29 March 1639), and several Latin poems which he composed in the course of his residency in the capital city: Ad Salsillum, and three Latin epigrams extolling the praises of the virtuosa soprano, Leonora Baroni. Read together, these texts serve to reveal much about Milton’s participation in, and reaction to, the ‘Puissant City’, (History of Britain, Bk 2).

The present monograph presents fresh evidence of Milton's integration into the academic and cultural life of seventeenth-century Rome. It argues that his links with two Roman academies: the Accademia dei Fantastici and Accademia degli Umoristi constitute a sustained participation in an academic community paralleling that of his independently attested performance in Florentine academies (on which I have published extensively). It also investigates his links with Alessandro Cherubini, David Codner, Giovanni Batista Doni, and the Baroni circle hymned in three published anthologies.

Chapter 1: Milton and the Accademia dei Fantastici investigates the cultural climate surrounding Milton's Ad Salsillum by examining two of that academy's publications: the Poesie dei Signori Accademici Fantastici di Roma (Rome, 1637) and the Academia Tenuta da Fantastici a. 12 di Maggio 1655 (Rome, 1655), the latter celebrating the creation of Fabio Chigi as Pope Alexander VII on 5 April 1655. Read in a new light, Milton’s self-fashioning, it is argued, takes its place not only alongside Salzilli’s encomium in Milton's honour, and his Italian sonnets in the 1637 Poesie, but also in relation to other poems in that collection, and the academy's essentially Catholic eulogistic trend. The chapter also provides fresh evidence of Salzilli’s survival of the illness described in Milton’s poem by his epistolary correspondence with Tomaso Stigliani.

Chapter 2: Milton and the Vatican argues for links between Milton’s Latin letter to Holstenius and a range of Holstenius’ published works: his edition of the axioms of the later Pythagoreans gifted by him to Milton, and his published neo-Platonic works. This is achieved by mutual appropriation of Similitudes in a series of Miltonic similes, the anabasis/katabasis motifs in a reworking of the Platonic theory of the transmigration of souls, and allusion to etymological details highlighted in Holstenius’ published editions. The chapter also reveals Milton’s alertness to typographical procedures and, by association, to Holstenius’ recent role (1638) as Director of the press of the Biblioteca Vaticana.

Chapter 3: Milton and the Accademia degli Umoristi argues for Milton’s likely participation in this Roman academy, as suggested by his links with its members. His three Latin epigrams in praise of Leonora Baroni, the only female member of the Umoristi, have hitherto been studied in relation to the 1639 Applausi in her honour. In a new reading, Milton, it is suggested, invokes and interrogates Catholic doctrine before a Catholic audience only to view the whole through the lens of a neo-Platonic Hermeticism (by echoing the phraseology of the sixteenth-century Franciscan Hannibal Rosselli) that refreshingly transcends religious difference. Crucially, the hitherto neglected L’Idea della Veglia (Rome, 1640) includes further encomiastic verse, sonnets to, and by Leonora, and details of the conversazioni hosted by her family at the precise time of Milton’s Roman sojourns. Milton may well have been a participant. The chapter concludes in an assessment of his links with the youthful prodigy Alessandro Cherubini, and of his audience with Francesco Barberini.

Chapter 4: Milton at a Roman Opera analyses the potential impact of ‘Chi Soffre, Speri’, which he attended on 18/28 February 1639, mounted by Francesco Barberini to inaugurate the recently completed theatre of the Palazzo Barberini. A detailed analysis of the opera's libretto, music, and theatricality casts a backward glance to Milton's Comus, and a forward glance to Paradise Lost. It also assesses Milton’s musical interests at this time, as attested by his links with Doni, and his purchase of works by Monteverdi and others.

Chapter 5: Milton’s English Connections in Rome develops the work of Miller and Chaney by investigating Milton’s co-diners at the English College in Rome on 30 October 1638, and by analysing his links between David Codner (alias Matteo Selvaggio), and the family of Jane Savage, Marchioness of Winchester, lamented by Milton in 1631. It also assesses his potential relations with the Englishman Thomas Gawen, who ‘accidentally sometimes fell into the company of John Milton’ (Antony Wood).

Le origini di Gubbio (Gubbio, Italy):The origins of Gubbio

6 month exhibition in Palazzo dei Consoli, Gubbio consisting of major archaeological discoveries and c.250 objects+ text and photographs.

Il Neolitico di Umbria - gallery, San Marco Gubbio.:Neolithic text and selection of material for display and interpretation

2009-10 Perugia – provision of material and data for gallery and information panels in Perugia Museo dei Provincia

La contabilità come mezzo per diffondere i valori religiosi. Il caso della diocesi di Ferrara del XV secolo.

Il tema del ruolo della contabilità nella Chiesa, con particolare riferimento al legame esistente tra contabilità e valori religiosi, non appare ad oggi sufficientemente studiato, soprattutto se si considera l’importanza economica e sociale di tale istituzione nel passato e nel presente. Il lavoro intende contribuire a tale indagine analizzando la realtà della Diocesi di Ferrara del XV secolo. Il Quattrocento rappresenta per la Chiesa italiana un’epoca di grande importanza, in quanto caratterizzato da un tentativo di riforma promosso da Papa Eugenio IV, volto a combattere la dilagante corruzione morale all’interno del clero e a riportare quest’ultimo alla sua funzione pastorale. L’appello pontificio venne accolto con particolare attenzione da due vescovi ferraresi, Giovanni Tavelli da Tossignano e Francesco Dal Legname, che attraverso le loro visite pastorali cercarono di divulgare i valori della riforma nella propria Diocesi. La promozione della nuova moralità, nell’esperienza ferrarese, era basata anche sulla diffusione degli strumenti contabili, mezzo essenziale per mettere in luce l’operato dei diversi membri del clero ed in particolare l’utilizzo da parte loro dei beni della Chiesa. Attraverso lo studio di documenti originali del XV secolo, scritti in lingua latina, il contributo si propone di mettere in luce come la contabilità possa assumere un ruolo complementare alla promozione dei valori religiosi.