Corporate Social Responsibility within the Northern Ireland Construction Industry: A Regional Review

As the construction industry continues to struggle with a poor societal image, many organizations have adopted a positive corporate social responsibility (CSR) towards their surrounding environment, with the objective of improving their persona within social circles. The aim of this research is to identify and document the various approaches adopted by UK contractors in relation to their international counterparts to aid in the identification of possible future benefits which may be exploitable.
In order to acquire the relevant information, a number of qualitative methodologies are adopted including a review of the current literature on the topic along with a detailed semi-structured interview with a UK based industry professional that specializes in corporate social responsibility. Through assessing the findings using qualitative analysis software, it is possible to disseminate the information, resulting in the identification of key findings. This research concludes that a number of factors profoundly affect corporate social responsibility within the UK versus other regions. These factors are identified as the effect of the recession, implementation and reporting along with competitiveness within the sector.
The impaction for practice within the UK construction sector of this research is that it enables various industry leaders to actively consider the findings of the research while also vigorously encouraging the establishment and development of corporate social responsibility, not only within their respective organizations, but within the construction industry as a whole. This would not only result in a more environmentally sustainable industry, but would also raise the awareness of the sector locally, nationally and internationally, therefore improving the overall perception of the sector on a variety of levels. This will ultimately lead to a more sustainable, environmentally friendly and collective industry while also considering the needs of one of its most important external stakeholders – the local community.

Meeting the Requirements of the CDM Regulations: Identification of Critical Success Factors of Small to Medium Sized Contractor’ Compliance in the UK Construction Industry

The Construction Design and Management (CDM) Regulations (2007) is one of the most important set of health and safety regulations in the construction industry today. The aim of this research is to examine critical success factors for CDM compliance in small to medium size contractors in the UK construction industry. The objectives of the research include the identification of critical barriers in doing so along with the identification of success factors where CDM is incorporated. A mixed method approach is adopted in the identification and categorisation of the various factors encompassing a literature review, interviews and questionnaire survey. The key finding which emerge is the lack of knowledge and understanding with regards the CDM regulations with the recommendation to encourage small and medium contractor compliance through illustrating the benefits attainable. The practicality of the research is evident based on the significant uptake in the CDM by larger contractors, yet the research indicates that further insight and guidance is required to educate and inform those working within small to medium sized contractors in the UK. Where such acknowledgement and compliance is adopted, it is envisaged that this sector will benefit from reduced incidents and accidents, increased productivity while ultimately leading to a safer and more productive industry as a whole.

A Review of Meditation in the Irish Construction Industry: Critical Success Factors in Competencies and Processes

The construction industry notoriously excels at dispute creation – both in Ireland and world wide. This paper exams mediation in the Irish construction industry based around critical success factors in the competencies and processes required by mediators operating in the construction industry. Through conducting the relevant analysis, it was possible to extract and outline the resulting critical success factors in process and competencies of mediators in the Irish construction industry. This was achieved through a review of the literature, followed by detailed interviews from industry experts to elicit and highlight the core competencies required. To aid in the study, qualitative analysis using mind mapping software was adopted, thus assisting the identification of the key factors. Following analysis, facilitative mediation was identified as best suited for the industry in question; recommendations and experience were key for mediator selection and five and six factors were identified for mediator skills and mediation critical success factors respectively. The results returned are similar to those determined by authors in other countries and provide a good reference point for the development the industry. By following the findings of this report mediators and parties in dispute can improve processes and be more successful in outcomes. In this study the author shows that mediation is an effective and appropriate method of resolving disputes within the Irish construction industry.

NEC Contracting: Evaluation of the Inclusion of Dispute Review Boards in lieu of Adjudication in the Construction Industry in the United Kinddom

The construction industry is renowned for spending vast sums in the resolution of disputes, but never in the prevention. The purpose of this paper is to analyse the New Engineering Contract (NEC) to determine whether or not adjudication has become misaligned with the contract’s objective of promoting effective management. In doing so, the paper examines dispute review boards in order to ascertain if they could be a viable alternative to adjudication. A sequential mixed methodology is adopted including a detailed literature review, eight semi-structured interviews, culminating in the circulation and analysis of a questionnaire, to record the significance of the factors identified. The research concludes that the majority of individuals agree that dispute review boards would be more aligned with the NEC. The familiarity of members, the potential to curb rogue behaviour of parties and the proactive nature of the board are flagged as positive features, however the cost aspect requires further investigation. The reservations made in the study about adjudication, such as the priority given to speed over accuracy and also the adversarial nature of the process, suggest that a preventative step prior to proceeding to adjudication would coincide more with the three core themes of the NEC Contract and therefore, be a positive addition.

Early Implementation of Building Information Modeling into a Cold-Formed Steel Company: Providing Novel Project Management Techniques and Solutions to Industry

The ability of building information modeling (BIM) to positively impact projects in the AEC through greater collaboration and integration is widely acknowledged. This paper aims to examine the development of BIM and how it can contribute to the cold-formed steel (CFS) building industry. This is achieved through the adoption of a qualitative methodology encompassing a literature review, exploratory interviews with industry experts, culminating in the development of e-learning material for the sector. In doing so, the research team have collaborated with one of the United Kingdom’s largest cold-formed steel designer/fabricators. By demonstrating the capabilities of BIM software and providing technical and informative videos in its creation, this project has found two key outcomes. Firstly, to provide invaluable assistance in the transition from traditional processes to a fully collaborative 3D BIM as required by the UK Government under the “Government Construction Strategy” by 2016 in all public sector projects. Secondly, to demonstrate BIM’s potential not only within CFS companies, but also within the AEC sector as a whole. As the flexibility, adaptability and interoperability of BIM software is alluded to, the results indicate that the introduction and development of BIM and the underlying ethos suggests that it is a key tool in the development of the industry as a whole.

Wear analysis and prediction of the life of a riveting die used in the automotive industry

Knowledge on the life span of the riveting dies used in the automotive industry is sparse. It is often the case that only when faulty products are produced are workers aware that their tool needs to be changed. This is of course costly both in terms of time and money. Responding to this challenge, this paper proposes a methodology which integrates wear and stress analysis to quantify the life of a riveting die. Experiments are carried out to measure the applied load required to split a rivet. The obtained results (i.e. force curves) are used to validate the wear mechanisms of the die observed using scanning electron microscopy. Sliding, impact, and adhesive wears are observed on the riveting die after a certain number of riveting cycles. The stress distribution on the die during riveting is simulated using a finite element (FE) approach. In order to confirm the accuracy of the FE model, the experimental force results are compared with the ones produced from FE simulation. The maximum and minimum von Mises' stresses generated from the FE model are input into a Goodman diagram and an S-N curve to compute the life of the riveting die. It is found that the riveting die is predicted to run for 4 980 000 cycles before failure.

Application of fibre assemblies as damping elements in the automotive industry

This investigation aims to characterise the damping properties of the nonwoven materials with potential applications in automotive and aerospace industry. Nonwovens are a popular choice for many applications due to their relatively low manufacturing cost and unique properties. It is known that nonwovens are efficient energy dispersers for certain applications such as acoustic damping and ballistic impact. It is anticipated that these energy absorption properties could eventually be used to provide damping for mechanical vibrations. However the behaviour of nonwovens under dynamic load and vibration has not been investigated before. Therefore we intend to highlight these aspects of the behaviour of the nonwovens through this research. In order to obtain an insight to the energy absorption properties of the nonwoven fabrics, a range of tests has been performed. Forced vibration of the cantilever beam is used to explore damping over a range of resonance modes and input amplitudes. The tests are conducted on aramid, glass fibre and polyester fabrics with a range of area densities and various coatings. The tests clarified the general dynamic behaviour of the fabrics tested and the possible response in more real application condition as well. The energy absorption in both thickness and plane of the fabric is tested. The effects of the area density on the results are identified. The main absorption mechanism is known to be the friction. The frictional properties are improved by using a smaller fibre denier and increasing fibre length, this is a result of increasing contact surface between fibres. It is expected the increased friction result in improving damping. The results indicate different mechanism of damping for fiber glass fabrics compared to the aramid fabrics. The frequency of maximum efficiency of damping is identified for the fabrics tested. These can be used to recommend potential applications.

Italy's got talent. How Italian leading companies in confectionery industry overcame the crisis

The crisis that spread worldwide since 2007 started from the financial sector and ended to affect also real economy. This process has attracted the attention of many scholars seeking to study its causes and impacts. Notwithstanding many works on this topic, the impact of the crisis on specific industries is still rather unexplored. The present work seeks to address this issue by analyzing the confectionery industry, with particular emphasis for Italian market leaders, Ferrero S.p.A. and Perfetti Van Melle S.r.l.. The aim of the study is to assess if they have been successful in tackling the crisis, keeping a satisfactory level of profitability associated to a good financial health notwithstanding ongoing difficulties. Moreover, we seek to analyze the strategies the companies employed to survive the crisis. The concern of the paper is both quantitative and qualitative. Thus, we calculated a complete set of indicators using a specific methodology for financial statement analysis which has been conceived especially for studying Italian firms; these data have been integrated with other information retrieved from the annual reports of the companies (especially the notes to the accounts and the directors’ report). The analysis highlights that both the firms benefit from a good financial health, with Perfetti Van Melle presenting a large amount of liquidity. On the contrary, liquidity should be the main concern of Ferrero because of an excessive reliance on current liabilities. Both the firms have a good level of profitability, even if Perfetti Van Melle’s one is decreasing. The key-strategies for the success of these firms are ongoing investments in state-of-the-art plant and machinery, an increasing use of equity as the main source of funding, along with huge investments in research and advertising.

Is a single item stress measure independently associated with subsequent severe injury: a prospective cohort study of 16,385 forest industry employees

Background: A previous review showed that high stress increases the risk of occupational injury by three- to five-fold. However, most of the prior studies have relied on short follow-ups. In this prospective cohort study we examined the effect of stress on recorded hospitalised injuries in an 8-year follow-up.
Methods: A total of 16,385 employees of a Finnish forest company responded to the questionnaire. Perceived stress was measured with a validated single-item measure, and analysed in relation recorded hospitalised injuries from 1986 to 2008. We used Cox proportional hazard regression models to examine the prospective associations between work stress, injuries and confounding factors.
Results: Highly stressed participants were approximately 40% more likely to be hospitalised due to injury over the follow-up period than participants with low stress. This association remained significant after adjustment for age, gender, marital status, occupational status, educational level, and physical work environment.
Conclusions: High stress is associated with an increased risk of severe injury.

Optimisation of Environment-friendly SCFRC mixes use in precast Concrete Industry

The concept of green concrete has been progressively introduced in concrete technology. At the same time, new generations of superplasticisers have become widely available and self-compacting concrete is being increasingly implemented. The aim of this research is to study the impact that different sustainable materials have on both fresh and hardened properties of Self-Compacting Fibre Reinforced Concrete (SCFRC) in order to implement their use in a precast concrete company. Different combinations of cement, mineral additions (active and inert), polypropylene fibres, superplasticisers, and aggregates have been considered. Fresh state performance has been assessed by means of: slump flow test, V-funnel, and J-ring. Concrete compressive strength values at different ages have been retained as representative of the material's performance in its hardened state. All these properties have been correlated with SCFRC proportioning parameters. The importance of interactions between mineral additions and between these and superplasticiser is emphasised, as well as the different consequences of using powders as cement replacement or as mineral additions.

Optimisation of Environment-friendly SCFRC mixes use in precast Concrete Industry (PDF Download Available). Available from: http://www.researchgate.net/publication/263304799_Optimisation_of_Environment-friendly_SCFRC_mixes_use_in_precast_Concrete_Industry [accessed Jun 5, 2015].

Government Influence on the Construction Industry during the Economic Recession 2007 - 2013

Due to the high degree of international and economic integration across the globe, the 2007 global financial crisis quickly spread, causing recessions and widespread credit restrictions in advanced nations. During recessions, economic fluctuations cause dramatic changes to the market structure of industries, in particular, that of the construction sector. These structural changes can be further influenced by government strategies and policies; which if used incorrectly, can serve to fuel and exacerbate downturns. In contrasting form, during an economic recession, government strategies and policies can also be used to aid in exiting such economic turbulence. From an extensive review of literature it became apparent that very little research offered a comprehensive and systematic overview of Irish and UK construction related government policies and strategies adopted during recessions; hence the emergence of this topic. As part of an ongoing research PhD, the purpose of this paper is to collate and group Irish and UK Government strategies and policies adopted for the construction sector during the recession period 2007-2013; resulting in the establishment of a construction industry development framework and a taxonomic framework. The results reveal serious problems with the national strategic plan for the Irish construction industry, given that there is no overseeing body or target dates for implementation of the proposed actions. Furthermore, both countries failed to prioritize the proposed key actions within their strategic plans. The findings of this paper can be applied in the context of the construction sector to address shortcomings in the respective sub-sectors, while also aiding policy makers and company executives in mapping out future strategic milestones.