Artificial Impedance Surfaces for Reduced Dispersion in Antenna Feeding Systems

An impedance surface is presented that reduces the dispersion experienced upon propagation of broadband pulses within rectangular waveguides. The surface impedance is selected so that, within a frequency range, the transverse resonance condition is satisfied for longitudinal wavenumber that varies linearly with frequency. A synthesis procedure for practical surface topologies consisting of periodic dipole arrays is described. An example involving a finite structure is employed to illustrate the reduced dispersion. Numerical simulation results obtained from in-house mode-matching method as well as HFSS are presented. A prototype is fabricated and tested experimentally validating the theoretical predictions.

Quality factor of E-plane periodically loaded waveguide resonators and filter applications

The quality factor of microwave resonators miniaturised by virtue of periodic loading is assessed. Five X-band resonators in E-plane technology with different miniaturisation factors have been designed to resonate at approximately the same frequency. The loaded quality factor is extracted from the fractional bandwidth and subsequently employed to estimate the unloaded quality factor. The study reveals that the unloaded quality factor drops approximately linearly with the miniaturisation. Subsequently design guidelines for E-plane filters with periodically loaded resonators are provided by means of an example involving a fifth-order filter. Full-wave simulated and experimental results are presented to validate the study.

Feeding and digestive strategies in deposit-feeding holothurians

Deposit-feeding holothurians employ a range of feeding and digestive strategies depending on the Particular environment to which they are adapted. Habitat and feeding specialisation is reflected in the tentacles, which show high diversity.

Tentacular diversity in deep-sea deposit-feeding holothurians: implications for biodiversity in the deep sea

The tentacles of deep-sea holothurians show a wide range of morphological diversity. The present paper examines gross tentacle morphology in surface deposit feeding holothurians from a range of bathymetric depths. Species studied included the elasipods: Oneirophanta mutabilis, Psychropotes longicauda and Benthogone rosea and the aspidochirotids: Paroriza prouhoi, Pseudostichopus sp., Bathyplotes natans and Paroriza pallens. The sympatric abyssal species Oneirophanta mutabilis, Psychropotes longicauda and Pseudostichopus sp. show subtle differences in diet and the structure and filling patterns of the gut that suggest differences in feeding strategies which may represent one mechanism to overcome competition for food resources in an environment where nutrient resources are considered to be, at least periodically, limiting. Interspecific differences in tentacle functional morphology and digestive strategies, which reflects taxonomic diversity could be explained in terms of Sanders'; Stability–Time Hypothesis. Since different tentacle types will turn over sediments to different extents, their impact on sedimentary communities will be enormous so that high diversity in meiofaunal communities may be explained most simply by Dayton and Hessler's Biological Disturbance Hypothesis.

Further observations on tentacular feeding mechanisms in holothurians

Resource partitioning by aspidochirote holothurians from Beacon Island, Western Australia is largely on the basis of distinct macro- and micro-habitat preferences. Where two or more species occur together or overlap, food partitioning may be by using distinct feeding techniques (Holothuria cinerascens (Brandt), H. impatiens (Forskal) and H. difficilis Semper) or by particle selectivity (H. cf. pervicax Selenka and H. hartmeyeri Erwe). Methods of particle handling by the majority of species studied are similar, involving the use of tentacular nodules on sediment deposits but H. cinerascens collects particles from suspension in a dendrochirote-like tentacle. The nature and rôle of surface secretions are considered for both types of tentacles and the taxonomic value of tentacle form in the Holothurioidea questioned.

Deposit-feeding mechanisms and resource partitioning in tropical holothurians

Aspidochirote holothurians found on tropical reef flats feed on particulate deposits which form a variety of substrata. The synaptid holothurian Opheodesoma grisea (Semper) feeds in a similar manner by scraping deposits from the surfaces of sea grasses. Distributional and gut content analyses showed that species partitioning is on the basis of substratum and particle size preference. Scanning electron microscopy revealed that the tentacles of aspidochirotes have a nodular surface while those of O. grisea have a tessellated surface structure. The twelve different species examined were shown to have different tentacular surface textures which bore an apparent relationship with the mean particle sizes selected by the different species. Light microscope studies of tentacle sections confirmed earlier observations on the extent of the water vascular system in aspidochirote and pinnate tentacles. From these observations a functional interpretation is proposed for tentacular operation and the means of particle selection in such holothurians.

Comparison of Experimental PIV Data and CFD Simulations for Flow in a Diesel Particulate Filter Inlet Diffuser

Flow maldistribution of the exhaust gas entering a Diesel Particulate Filter (DPF) can cause uneven soot distribution during loading and excessive temperature gradients during the regeneration phase. Minimising the magnitude of this maldistribution is therefore an important consideration in the design of the inlet pipe and diffuser, particularly in situations where packaging constraints dictate bends in the inlet pipe close to the filter, or a sharp diffuser angle. This paper describes the use of Particle Image Velocimetry (PIV) to validate a Computational Fluid Dynamic (CFD) model of the flow within the inlet diffuser of a DPF so that CFD can be used with confidence as a tool to minimise this flow maldistribution. PIV is used to study the flow of gas into a DPF over a range of steady state flow conditions. The distribution of flow approaching the front face of the substrate was of particular interest to this study. Optically clear diffusing cones were designed and placed between pipe and substrate to allow PIV analysis to take place. Stereoscopic PIV was used to eliminate any error produced by the optical aberrations caused by looking through the curved wall of the inlet cone. In parallel to the experiments, numerical analysis was carried out using a CFD program with an incorporated DPF model. Boundary conditions for the CFD simulations were taken from the experimental data, allowing an experimental validation of the numerical results. The CFD model incorporated a DPF model, the cement layers seen in segmented filters and the intumescent matting that is commonly used to pack the filter into a metal casing. The mesh contained approximately 580,000 cells and used the realizable ?-e turbulence model. The CFD simulation predicted both pressure drop across the DPF and the velocity field within the cone and at the DPF face with reasonable accuracy, providing confidence in the use the CFD in future work to design new, more efficient cones.

Stable breeding despite variable feeding in two sympatric auk species

Capsule Despite substantial inter-annual and inter-specific variance in the composition of chick diet, the breeding success of Guillemots (Common Murres) Uria aalge and Razorbills Alca torda remained constant from 2008 to 2010.
Aims To examine inter-specific and inter-annual differences in breeding success, chick provisioning behaviour and predation between two sympatric auk species.
Methods Focal observations of breeding auks at Rathlin Island, Northern Ireland, during 2008, 2009 and 2010 recorded reproductive success, reasons for breeding failure, prey composition and quality and chick provisioning rates.
Results Breeding success of both species was stable over the three years, despite significant variance in the composition and quality of the diet provided to chicks. Razorbills experienced greater rates of failure than Guillemots owing to chick loss and had lower overall breeding success.
Conclusion Guillemot and Razorbill breeding success was independent of the composition and quality of prey items delivered to chicks. Inter-specific differences in reproductive success may have been attributed to greater rates of predation at Razorbill rather than Guillemot nests.