BRCA1 Immunohistochemical Staining as a Prognostic Indicator in Uterine Serous Carcinoma

OBJECTIVES: The objective of this study was to investigate the relationship between BRCA1 protein expression, as determined by immunohistochemistry, and clinical outcome in uterine serous carcinoma (USC). METHODS: A tissue microarray containing duplicate cores of 73 cases of USC was immunohistochemically stained with mouse anti-BRCA1 (Ab-1) mouse monoclonal (MS110) antibody. The cores were scored in a semiquantitative manner evaluating both the distribution and intensity of nuclear staining. BRCA1 protein expression was correlated with progression-free survival. RESULTS: Seventy-two of 73 cases were assessable, and there was a statistically significant decreased progression-free survival for those cases exhibiting tumor cell nuclei staining of 76% or greater (P = 0.0023). CONCLUSIONS: Our study illustrates that a low level of BRCA1 protein expression is a favorable prognostic indicator in USC, similar to what is observed in high-grade serous ovarian carcinoma. Further studies should focus on the BRCA1 status of USCs at a molecular level and also investigate whether BRCA1 protein expression is associated with response to chemotherapy in USC.

The Palisades is a key reference site for the middle Pleistocene of eastern Beringia: New evidence from paleomagnetics and regional tephrostratigraphy

The Palisades, in central Alaska, is one of the most prominent exposures of Quaternary sediments on the Yukon River. Perennially-frozen silt and sand at the Palisades are presently thought to preserve paleoenvironmental records from the Holocene to ~Marine Isotope Stage (MIS) 8 and, beneath a major unconformity, the earliest Pleistocene (~2 Ma). We present new paleomagnetic and tephrochronologic constraints that substantially revise the age of the sediments at the Palisades. We describe 15 new tephra beds, including five beds below the prominent PAL tephra that correlate to known tephra with independent age control from other sites in eastern Beringia. These five known tephra include Chester Bluff tephra, which is present in east-central Alaska and the Yukon, and the newly named Alyeska Pipeline and Taylor Highway tephra from central Alaska; all are constrained to the middle Pleistocene. Paleomagnetic transects from the base of the bluff to the MIS 5e forest bed yield normal polarity, with the exception of a brief reversal event between Old Crow tephra (124 ± 10 ka) and the MIS 5e forest bed that is likely the first documentation of the Blake paleomagnetic event in Alaskan loess. The detailed tephrostratigraphy and paleomagnetic data collectively suggest that most of the sedimentary record at the Palisades is middle Pleistocene in age. The Palisades thus preserves a rare record of late to middle Pleistocene paleoenvironments with multiple regionally distributed tephra beds. © 2013 Elsevier Ltd.

Titans

A large-scale, site-specific play for the opening of the Titanic Belfast building. A shipyard preacher, desperate to be reunited with his wife and daughter, performs an arcane rite on the centenary of the sinking of the Titanic, meeting souls connected with the sinking of the ship.

The prediction of process-induced deformation in a thermoplastic composite in support of manufacturing simulation

Digital manufacturing techniques can simulate complex assembly sequences using computer-aided design-based, as-designed' part forms, and their utility has been proven across several manufacturing sectors including the ship building, automotive and aerospace industries. However, the reality of working with actual parts and composite components, in particular, is that geometric variability arising from part forming or processing conditions can cause problems during assembly as the as-manufactured' form differs from the geometry used for any simulated build validation. In this work, a simulation strategy is presented for the study of the process-induced deformation behaviour of a 90 degrees, V-shaped angle. Test samples were thermoformed using pre-consolidated carbon fibre-reinforced polyphenylene sulphide, and the processing conditions were re-created in a virtual environment using the finite element method to determine finished component angles. A procedure was then developed for transferring predicted part forms from the finite element outputs to a digital manufacturing platform for the purpose of virtual assembly validation using more realistic part geometry. Ultimately, the outcomes from this work can be used to inform process condition choices, material configuration and tool design, so that the dimensional gap between as-designed' and as-manufactured' part forms can be reduced in the virtual environment.

'Changing attitudes with a little imagination': Imagined contact effects on young children's intergroup bias

The current research tested a recent development in social psychology, namely 'imagined contact', among young children (n = 123, 5 to 10 years). Children imagined interacting with a physically disabled child, or did not take part in this activity (the control group). Compared with the control group, children who engaged in 'imagined contact' subsequently showed reduced intergroup bias in their general attitude and ratings of warmth and competence. Imagined contact also led to more positive intended friendship behavior towards the disabled, but only among 5 – 6 year olds. This provides partial support for our hypothesis that younger children, perhaps as a result of their lack of outgroup experience, are more likely to benefit from imagined contact. Implications for the development of attitudes towards the disabled, imagined contact theory and the development of classroom-based prejudice-reduction techniques based on imagined contact are discussed.

Exhibiting Maritime Histories: Titanic Belfast in the Post-Conflict City

The sinking of the RMS Titanic in 1912 represents one of the most infamous maritime disasters in the history of shipping. Yet despite it entering the public imagination in the decades after its sinking, until recently it has all but been erased from the collective memory of the people of Belfast, the city in which it was built. In a post-conflict context, however, Belfast has begun to re-imagine the role of the ship in the city’s history, most particularly in the re-development of the docklands area and its designation as the Titanic Quarter, and through its landmark project the Titanic Belfast museum. This paper will trace the economic, social and political context from which the Titanic was built, and the role that this played in silencing any very public commemoration of its sinking until after the signing of the Belfast Agreement. The ‘story’ told in the new museum will be analysed from this perspective and will illustrate how the wounds of the Troubles continue to inform the interpretation of the city’s divided past.

Determining optimal duration of seed translocation periods for benthic mussel (Mytilus edulis) cultivation using physiological and behavioural measures of stress

During the benthic cultivation process of Mytilus edulis (blue mussels), wild mussel seed is often transplanted from naturally occurring subtidal beds to sheltered in-shore waters to be grown to a commercial size. The survival of these relaid mussels is ultimately a function of their quality and physiological condition upon relaying and it has been recognised that mussels can suffer from a loss in condition following transportation. We investigated whether the process of being transported to ongrowing plots had a negative effect on the physiological health and resultant behaviour of mussels by simulating transportation conditions in a controlled experiment. Mussels were kept, out of water, in plastic piping to recreate translocation conditions and further, we tested if depth held in a ship hold (0, 1.5 and 3 m) and length of time emersed (12, 24 and 48 h) affected mussel condition and behaviour. Physiological condition was assessed by quantifying mussel tissue pH and whole tissue glucose, glycogen, succinate and propionate concentrations. The rate of byssogenesis was also quantified to estimate recovery following a period of re-immersion. The depth at which mussels were held did not affect any of the physiological indicators of mussel stress but short-term byssus production was affected. Mussels held at 3 m produced fewer byssus threads during the first 72 h following re-immersion compared with mussels at 0 m (i.e. not buried) suggesting that depth held can impede recovery following transportation. Duration of emersion affected all stress indicators. Specifically, mussels held out of water for 48 h had a reduced physiological condition compared with those emersed for just 12 h. This work has practical implications for the benthic cultivation industry and based on these results we recommend that mussels are held out of water for less than 24 h prior to relaying to ensure physiological health and resultant condition is preserved.

The Vertical Distribution and Evolution of Slam Pressure on an Oscillating Wave Surge Converter

The accurate definition of the extreme wave loads which act on offshore structures represents a significant challenge for design engineers and even with decades of empirical data to base designs upon there are still failures attributed to wave loading. The environmental conditions which cause these loads are infrequent and highly non-linear which means that they are not well understood or simple to describe. If the structure is large enough to affect the incident wave significantly further non-linear effects can influence the loading. Moreover if the structure is floating and excited by the wave field then its responses, which are also likely to be highly non-linear, must be included in the analysis. This makes the description of the loading on such a structure difficult to determine and the design codes will often suggest employing various tools including small scale experiments, numerical and analytical methods, as well as empirical data if available.
Wave Energy Converters (WECs) are a new class of offshore structure which pose new design challenges, lacking the design codes and empirical data found in other industries. These machines are located in highly exposed and energetic sites, designed to be excited by the waves and will be expected to withstand extreme conditions over their 25 year design life. One such WEC is being developed by Aquamarine Power Ltd and is called Oyster. Oyster is a buoyant flap which is hinged close to the seabed, in water depths of 10 to 15m, piercing the water surface. The flap is driven back and forth by the action of the waves and this mechanical energy is then converted to electricity.
It has been identified in previous experiments that Oyster is not only subject to wave impacts but it occasionally slams into the water surface with high angular velocity. This slamming effect has been identified as an extreme load case and work is ongoing to describe it in terms of the pressure exerted on the outer skin and the transfer of this short duration impulsive load through various parts of the structure.
This paper describes a series of 40th scale experiments undertaken to investigate the pressure on the face of the flap during the slamming event. A vertical array of pressure sensors are used to measure the pressure exerted on the flap. Characteristics of the slam pressure such as the rise time, magnitude, spatial distribution and temporal evolution are revealed. Similarities are drawn between this slamming phenomenon and the classical water entry problems, such as ship hull slamming. With this similitude identified, common analytical tools are used to predict the slam pressure which is compared to that measured in the experiment.

Bis(1,4,7-trithiacyclononane-S,S ',S '')nickel(II) dibromide tetrahydrate

The Ni-II centre in the cation of the title compound, [Ni(C6H12S3)(2)]Br-2. 4H(2)O, occupies a crystallographic inversion centre and is octahedrally coordinated by six S-donors from two [9]aneS(3) ligands. Ni-S distances range from 2.3749 (16) to 2.4077 (15) Angstrom and S-Ni-S angles where both thia donors belong to the same ligand lie in a narrow range between 88.09 (5) and 88.67 (6)degrees. The water molecules participate in extensive hydrogen bonding with each other and with the Br- anions to form double chains with eight- and 12-membered hydrogen-bonded rings running along the crystallographic a direction.

Inactivating mutations in an SH2 domain-encoding gene in X-linked lymphoproliferative syndrome

X-linked lymphoproliferative syndrome (XLP) is an inherited immunodeficiency characterized by increased susceptibility to Epstein-Barr virus (EBV). In affected males, primary EBV infection leads to the uncontrolled proliferation of virus-containing B cells and reactive cytotoxic T cells, often culminating in the development of high-grade lymphoma. The XLP gene has been mapped to chromosome band Xq25 through linkage analysis and the discovery of patients harboring large constitutional genomic deletions. We describe here the presence of small deletions and intragenic mutations that specifically disrupt a gene named DSHP in 6 of 10 unrelated patients with XLP. This gene encodes a predicted protein of 128 amino acids composing a single SH2 domain with extensive homology to the SH2 domain of SHIP, an inositol polyphosphate 5-phosphatase that functions as a negative regulator of lymphocyte activation. DSHP is expressed in transformed T cell lines and is induced following in vitro activation of peripheral blood T lymphocytes. Expression of DSHP is restricted in vivo to lymphoid tissues, and RNA in situ hybridization demonstrates DSHP expression in activated T and B cell regions of reactive lymph nodes and in both T and B cell neoplasms. These observations confirm the identity of DSHP as the gene responsible for XLP, and suggest a role in the regulation of lymphocyte activation and proliferation. Induction of DSHP may sustain the immune response by interfering with SHIP-mediated inhibition of lymphocyte activation, while its inactivation in XLP patients results in a selective immunodeficiency to EBV.

Introducing the CTA concept

The Cherenkov Telescope Array (CTA) is a new observatory for very high-energy (VHE) gamma rays. CTA has ambitions science goals, for which it is necessary to achieve full-sky coverage, to improve the sensitivity by about an order of magnitude, to span about four decades of energy, from a few tens of GeV to above 100 TeV with enhanced angular and energy resolutions over existing VHE gamma-ray observatories. An international collaboration has formed with more than 1000 members from 27 countries in Europe, Asia, Africa and North and South America. In 2010 the CTA Consortium completed a Design Study and started a three-year Preparatory Phase which leads to production readiness of CTA in 2014. In this paper we introduce the science goals and the concept of CTA, and provide an overview of the project. © 2013 Elsevier B.V. All rights reserved.