Evolving southwest African response to abrupt deglacial North Atlantic climate change events

Climate change during the last deglaciation was strongly influenced by the „bipolar seesaw‟, producing antiphase climate responses between the North and South Atlantic. However, mounting evidence demands refinements of this model, with the occurrence of abrupt events in southern low to mid latitudes occurring in-phase with North Atlantic climate. Improved constraints on the north-south phasing and spatial extent of these events are therefore critical to
understanding the mechanisms that propagate abrupt events within the climate system. We present a 19,400 year multi-proxy record of climate change obtained from a rock hyrax midden in southernmost Africa. Arid anomalies in phase with the Younger Dryas and 8.2 ka events are apparent, indicating a clear shift in the influence of the bipolar seesaw, which diminished as the Earth warmed, and was succeeded after ~14.6 ka by the emergence of a dominant interhemispheric atmospheric teleconnection.

Effect of nanosilica addition on the fresh properties and shrinkage of mortars with fly ash and superplasticizer

The ongoing use of various mineral additions along with chemical admixtures such as superplasticizers justifies the need for further research. Understanding and quantifying their effects and possible synergies on the fresh and hardened properties of cement-based materials is necessary, especially if some of these components are known to have a pozzolanic effect. This paper describes and models the fresh and hardened properties of cement mortars including nanosilica and fly ash, and relates their properties to the proportioning of these materials and the superplasticizer dosage. Mini-slump, Marsh cone and Lombardi cone tests were used to examine the properties of the fresh mortars, and to assess density, plastic shrinkage, and drying shrinkage up to 20 days. The equations presented in this paper make it possible to optimize mortar proportionings to the required levels of performance in both fresh and hardened states.

The Role of Water Content and Paste Proportion on Physico-mechanical Properties of Alkali Activated Fly Ash–Ggbs Concrete

The growth of the construction industry worldwide poses a serious concern on the sustainability of the building material production chain, mainly due to the carbon emissions related to the production of Portland cement. On the other hand, valuable materials from waste streams, particularly from the metallurgical industry, are not used at their full potential. Alkali activated concrete (AAC) has emerged in the last years as a promising alternative to traditional Portland cement based concrete for some applications. However, despite showing remarkable strength and durability potential, its utilisation is not widespread, mainly due to the lack of broadly accepted standards for the selection of suitable mix recipes fulfilling design requirements, in particular workability, setting time and strength. In this paper, a contribution towards the design development of AAC synthetized from pulverised fuel ash (60%) and ground granulated blast furnace slag (40%) activated with a solution of sodium hydroxide and sodium silicate is proposed. Results from a first batch of mixes indicated that water content influences the setting time and that paste content is a key parameter for controlling strength development and workability. The investigation indicated that, for the given raw materials and activator compositions, a minimum water to solid (w/s) ratio of 0.37 was needed for an initial setting time of about 1 hour. Further work with paste content in the range of 30% to 33% determined the relationship between workability and strength development and w/s ratio and paste content. Strengths in the range of 50 - 60 MPa were achieved.

Factors influencing the compressive strengths of fly ash based geopolymers

Several factors affecting the reactivity of pulverised fuel ash (pfa) as a precursor for geopolymer concrete have been investigated. These include physical and chemical properties of various pfa sources, inclusion of ground granulated blast furnace slag (ggbs), chemical activator dosages and curing temperature. Alkali-activated pfa was found to require elevated curing temperatures and high alkali concentrations. A mixture of sodium hydroxide and sodium silicate was used and this was shown to result in high strengths, as high as 70 MPa at 28-days. The presence of silicates in solution was found to be a key factor. Detailed physical and chemical characterisation was carried out on thirteen pfa sources from the UK. The most important factor affecting the reactivity was found to be the particle size of pfa. The loss on ignition (LOI) and the amorphous content are also important parameters that need to be considered for the selection of pfa for use in geopolymer concrete. The partial replacement of pfa by ground granulated blast furnace slag (ggbs) was found to be beneficial in not only avoiding the need for elevated curing temperatures but also in improving compressive strengths. Microstructural characterisation with scanning electron microscope (SEM) coupled with energy dispersive X-ray spectroscopy (EDS) was performed on pfa/ggbs pastes. The reaction product of pfa and ggbs in these binary systems was calcium aluminium silicate hydrate gel (C-A-S-H) with inclusion of Na in the structure.

Forecasting invasions: resource use by mussels informs invasion patterns along the South African coast

Invasive species are often more able to rapidly and efficiently utilise resources than natives, and comparing per capita resource use at different resource densities among invaders and trophically analogous natives could allow for reliable predictions of invasiveness. In South Africa, invasion by the Mediterranean mussel Mytilus galloprovincialis has transformed wave-exposed shores, negatively affecting native mussel species. Currently, South Africa is experiencing a second mussel invasion with the recent detection of the South American Semimytilus algosus. We tested per capita uptake of an algal resource by invading M. galloprovincialis, S. algosus, and the native Aulacomya atra at different algal concentrations and temperatures, representing the west and south coasts of South Africa, to examine whether their per capita resource use could be a predictor of their spread and subsequent invasiveness. Regardless of temperature, M. galloprovincialis was the most efficient consumer, significantly reducing algal cells compared to the other species when the resource was presented in both low and high starting densities. Furthermore, these findings aligned with a greater biomass of M. galloprovincialis on the shore in comparison with the other species. Resource use by the new invader S. algosus was dependent on the density of resource and, although this species was efficient at low algal concentrations at cooler temperatures, this pattern broke down at higher algal densities. This was once more reflected in lower biomass in surveys of this species along the cool west coast. We therefore forecast that S. algosus will be become established along the south coast; however, we also predict that M. galloprovincialis will maintain dominance on these shores.

Review of Slavery by Any Other Name: African Life under Company Rule in Colonial Mozambique.

Book review of Slavery by Any Other Name: African Life under Company Rule in Colonial Mozambique, by Eric Allina, Charlottesville, University of Virginia Press, 2012, 255 pp., £44.50, ISBN 978-0-8139-3272-9.

ANRIL Variants and Aggressive Periodontitis in European and African Populations

Introduction: The chromosome 9p21 locus has been identified as a marker of coronary artery disease. In this locus studies have focused on variations in the ANRIL gene that has also been identified as a strong candidate for association with aggressive periodontitis (AgP).
Objective: To investigate possible associations between gene variants of ANRIL and AgP in European and African populations.
Methods: European AgP cases (n= 213) and age-matched periodontally healthy controls (n= 81) were recruited from centres in the United Kingdom (Belfast, Glasgow, Newcastle and London). African AgP cases (n= 95) and controls (n= 105) were recruited in Khartoum, Sudan. Five single nucleotide polymorphisms (SNPs) in ANRIL were genotyped using Sequenom and analysed using Haploview with permutation testing to correct for multiple candidates. Odds ratios (OR) and 95% confidence intervals (95%CI) were calculated.
Results: In the European subjects there was a significant association between rs518394 (p=0.0013; OR = 1.81, 95%CI 1.26-2.61) and rs1333049 (p=0.0028; OR = 1.75, 95%CI 1.21-2.52) and AgP. These associations remained significant after permutation testing. In addition there was an association between rs 1360590 (p=0.035) and AgP in females. In the African subjects there was a significant association between only one SNP rs1537415 and AgP (p=0.036; OR = 1.59, 95%CI 1.04-2.43), however, this was not significant following permutation testing. There were no significant associations with rs3217992 in either population.
Conclusions: SNP variants in the ANRIL locus were shown to be significantly associated with AgP in a European population and for the first time in an African population confirming this as the best replicated locus for aggressive periodontitis.

Antibacterial Activity of Peptides from the African Volcano Frog

Introduction: Cationic, α- helical antimicrobial peptides found in skin secretions of the African Volcano Frog, Xenopus amieti include magainin-AM1, peptide glycine-leucine-amide (PGLa-AM1) and caerulein-precursor fragment (CPF-AM1). Objectives: The principle objective of this study was to determine the antibacterial activity of these peptides against a range of aerobic and anaerobic and oral pathogens. Secondary objectives were to establish their lipopolysaccharide (LPS) binding activity and determine potential cytotoxic effects against host cells. Methods: Magainin-AM1, PGLa-AM1 and CPF-AM1 were assessed for their antimicrobial activity against Fusobacteriim nucleatum, Streptococcus mutans, Lactobacillus acidophilus, Enterococcus faecalis and Streptococcus milleri using a double layer radial diffusion assay. The propensity for each peptide to bind LPS was determined using an indirect ELISA. The potential cytotoxicity of the peptides against human pulp cells in vitro was determined using the 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Results: Magainin-AM1, PGLa-AM1 and CPF-AM1 displayed potent antimicrobial activity against all the bacterial pathogens tested, with Magainin-AM1 being the least effective. PGLa-AM1 was most potent against S. mutans, with a minimum inhibitory concentration (MIC) of 1.2 μM. PGLa-AM1 and CPF-AM1 were both very active against F. nucleatum with MIC values of 1.5 μM and 2.2 μM respectively. The LPS binding ability of the peptides varied depending on the bacterial source of the LPS, with PGLa-AM-1 being the most effective at binding LPS. Cytotoxicity studies revealed all three peptides lacked cytotoxic effects at the concentrations tested. Conclusions: The peptides magainin-AM1, PGLa-AM1 and CPF-AM1 from the African Volcano Frog, Xenopus amieti displayed potent antimicrobial activity and LPS binding activity against a range of oral pathogens with little cytotoxic effects. These peptides merit further studies for the development of novel therapeutics to combat common oral bacterial infections.

Antifungal Activity of Peptides From the African Volcano Frog

Background: Candidal species, particularly Candida albicans are common pathogens in the oral cavity and perioral region. Many of the manifestations of candidiasis are associated with the formation of Candida biofilms on host surfaces and/or implanted biomaterials. Biofilms are clinically important due to their increased resistance to therapeutic intervention and the ability of cells within the biofilm to withstand host immune defences.
Objectives: The present study was designed to investigate the antifungal activity of two peptides found in skin secretions of the African volcano frog (Xenopus amieti) against the type strain of C. albicans NCTC 3179.
Methods: The antifungal activity of magainin-AM1 and peptide glycine-leucine-amide (PGLa-AM1) against C. albicans NCTC 3179 was studied in both planktonic and biofilm forms. Radial diffusion assays were used to obtain the minimum inhibitory concentration (MIC) of magainin-AM1 and PGLa-AM1 against planktonic C. albicans. Time kill assays were used to determine the time dependent fungicidal action of the peptides at both 4oC and 37oC. A 96 well microtitre plate model for candidal biofilm formation was employed to study the ability of the peptides to disrupt the early biofilm development (up to 24 hours) compared with the antifungal drug fluconazole. Biofilm formation was determined quantitatively using the crystal violet assay.
Results: Both magainin-AM1 and PGLa-AM1 demonstrated inhibitory activity against Candida albicans, with MIC values of 24.3 uM and 7.5uM respectively. Time-kill assays revealed bactericidal activity of both peptides at 37oC and 4oC. Magainin-AM1 and PGLa-AM1 inhibited biofilm formation in microtitre plate assays. The peptides were particularly effective during early biofilm establishment when compared with fluconazole treatment.
Conclusions: Magainin-AM1 and PGLa-AM1 are active against C albicans in both planktonic and biofilm forms. Further testing of this peptide family against candidal biofilms is recommended.