Stability and performance enhancements of Electrokinetic-Fenton soil remediation

Electrokinetic process is a potential in situ soil remediation process which transports the contaminants via electromigration and electroosmosis. For organic compounds contaminated soil, Fenton’s reagent is utilized as a flushing agent in electrokinetic process (Electrokinetic-Fenton) so that removal of organic contaminants could be achieved by in situ oxidation/destruction. However, this process is not applied widely in industries as the stability issue for Fenton’s reagent is the main drawback. The aim of this mini review is to summarize the developments of Electrokinetic-Fenton process on enhancing the stability of Fenton’s reagent and process efficiency in past decades. Generally, the enhancements are conducted via four paths: (1) chemical stabilization to delay H2O2 decomposition, (2) increase of oxidant availability by monitoring injection method for Fenton’s reagent, (3) electrodes operation and iron catalysts and (4) operating conditions such as voltage gradient, electrolytes and H2O2 concentration. In addition, the types of soils and contaminants are also showing significant effect as the soil with low acid buffering capacity, adequate iron concentration, low organic matter content and low aromatic ring organic contaminants generally gives better efficiency.

Influence of fill factor variation in high shear granulation on the post granulation processes: Compression and tablet properties

This paper describes an investigation of the effect of fill factor; on the compaction behaviour of the granules during tableting and hence mechanical properties of tablets formed. The fill factor; which is the ratio of volume of wet powder material to vessel volume of the granulator, was used as an indicator of batch size. It has been established previously that in high shear granulation the batch size influences the size distribution and granule mechanical properties [1]. The work reported in this paper is an extension to the work presented in [1], hence granules from the same batches were used in production of tablets. The same tabletting conditions were employed during tabletting to allow a comparison of their properties. The compaction properties of the granules are inferred from the data generated during the tabletting process. The tablet strength and dissolution properties of the tablets were also measured. The results obtained show that the granule batch size affects the strength and dissolution of the tablets formed. The tablets produced from large batches were found to be weaker and had a faster dissolution rate. The fill factor was also found to affect the tablet to tablet variation of a non-functional active pharmaceutical ingredient included in the feed powder. Tablets produced from larger batches show greater variation compared to those from smaller batches.

Perception and Automatic Recognition of Laughter from Whole-Body Motion: Continuous and Categorical Perspectives

Despite its importance in social interactions, laughter remains little studied in affective computing. Intelligent virtual agents are often blind to users’ laughter and unable to produce convincing laughter themselves. Respiratory, auditory, and facial laughter signals have been investigated but laughter-related body movements have received less attention. The aim of this study is threefold. First, to probe human laughter perception by analyzing patterns of categorisations of natural laughter animated on a minimal avatar. Results reveal that a low dimensional space can describe perception of laughter “types”. Second, to investigate observers’ perception of laughter (hilarious, social, awkward, fake, and non-laughter) based on animated avatars generated from natural and acted motion-capture data. Significant differences in torso and limb movements are found between animations perceived as laughter and those perceived as non-laughter. Hilarious laughter also differs from social laughter. Different body movement features were indicative of laughter in sitting and standing avatar postures. Third, to investigate automatic recognition of laughter to the same level of certainty as observers’ perceptions. Results show recognition rates of the Random Forest model approach human rating levels. Classification comparisons and feature importance analyses indicate an improvement in recognition of social laughter when localized features and nonlinear models are used.

Compositional and Performance Mapping in Computer Chamber Music: A Case Study

The mapping problem is inherent to digital musical instruments (DMIs), which require, at the very least, an association between physical gestures and digital synthesis algorithms to transform human bodily performance into sound. This article considers the DMI mapping problem in the context of the creation and performance of a heterogeneous computer chamber music piece, a trio for violin, biosensors, and computer. Our discussion situates the DMI mapping problem within the broader set of interdependent musical interaction issues that surfaced during the composition and rehearsal of the trio. Through descriptions of the development of the piece, development of the hardware and software interfaces, lessons learned through rehearsal, and self-reporting by the participants, the rich musical possibilities and technical challenges of the integration of digital musical instruments into computer chamber music are demonstrated.

Environmental Operations Management and its links with Proactivity and Performance: A study of the UK Food Industry

Two important strands of research within the literature on Environmental Operations Management (EOM) relate to environmental approach and performance. Often in this research the links between environmental approach, environmental performance and EOM are considered separately with little consideration given to the interrelationships between them. This study develops and tests a theoretical framework that combines these two strands to explore how UK food manufacturers approach EOM. The framework considers the relationships between an environmentally pro-active strategic orientation, EOM and environmental and cost performance. A cross-sectional survey was developed to collect data from a sample of 1200 food manufacturing firms located within the UK. Responses were sought from production and operations managers who are knowledgeable about the environmental operations practices within their firms. A total of 149 complete and useable responses were obtained. The reliability and validity of the scales used in the survey were tested using exploratory factor analysis, prior to the testing of the hypotheses underpinning the theoretical framework using hierarchical regression analysis. Our results generate support for a link between environmental proactivity, environmental practices and performance, consistent with the natural resource-based view (NRBV) and a number of studies in the extant literature. In considering environmental proactivity as a standalone concept that influences the implementation of environmental practices outlined in the NRBV, our study generates some novel insights into these links. Further our results provide some interesting insights for managers within the food industry who can identify the potential benefits of certain practices for performance within this unique context.

Network Connectivity Proxy: Architecture, Implementation, and Performance Analysis

Several studies in the last decade have pointed out that many devices, such as computers, are often left powered on even when idle, just to make them available and reachable on the network, leading to large energy waste. The concept of network connectivity proxy (NCP) has been proposed as an effective means to improve energy efficiency. It impersonates the presence of networked devices that are temporally unavailable, by carrying out background networking routines on their behalf. Hence, idle devices could be put into low-power states and save energy. Several architectural alternatives and the applicability of this concept to different protocols and applications have been investigated. However, there is no clear understanding of the limitations and issues of this approach in current networking scenarios. This paper extends the knowledge about the NCP by defining an extended set of tasks that the NCP can carry out, by introducing a suitable communication interface to control NCP operation, and by designing, implementing, and evaluating a functional prototype.

The role of trust in relationship development and performance improvement

The importance of inter-organizational trust to project success has been increasingly highlighted in the construction industry. This study aims to explore the role of trust between project parties. It adopts a combination of quantitative and qualitative methodologies. Based on the analysis of the responses of a questionnaire survey, trust is demonstrated to have a significant contribution to the development of cooperative or collaborative relationships; fostering trust proves to have a major influence on the improvement of project performance; and some relationship and performance indicators are found to have closer associations with trust than others so that trust is more important to
the development of relationship and the improvement of performance in these aspects. The analysis of questionnaire responses also provides significant evidence for the reduction in monitoring and control following the increase of mutual trust. The questionnaire survey is followed by a series of expert interviews, both of which contribute to the establishment of a model that links trust with relationship and performance and distinguishes the new approach that is based on trust from the traditional mechanism that relies on monitoring and control.

New methods for studying perception and action coupling

To study perception and action, Gibson advocated that “the laboratory must be like life” (Gibson, 1979, p. 3). In other words, the interactive relationship between an organism and his/her envi- ronment must be maintained so that the behavior observed in an experimental context mirrors, as closely as possible, the behavior observed in a realistic sport setting. The concept of repre- sentative design introduced by Brunswik in 1956 emphasized the need to have experimental tasks that allow the player to pick up perceptual information that specifies a property of the environment-actor system (Araújo et al., 2005; see also Chapter 24). In this chapter we will provide a brief overview of the methodologies used to study perception and action in sport and present, in some detail, the opportunities new methodologies such as immersive, interactive vir- tual reality can offer researchers in sport expertise.

Multi-UAVs formation autopilot design and performance analysis under interconnection topologies

This paper employs a unique extension-decomposition-aggregation (EDA) scheme to solve the formation flight control problem for multiple unmanned aerial vehicles (UAVs). The corresponding decentralised longitudinal and lateral formation autopilots are novelly designed to maintain the overall formation stability when encountering changes of the formation error and topologies. The concept of propagation layer number (PLN) is also proposed to provide an intuitive criterion to judge which type of formation topology is more suitable to minimise formation error propagation (FEP). The criterion states that the smaller the PLN of the formation is, the quicker the response to the formation error is. A smaller PLN also means that the resulting topology provides better prevention to the FEP. Simulation studies of formation flight of multiple Aerosonde UAVs demonstrate that the designed formation controller based on the EDA strategy performs satisfactorily in maintaining the overall formation stable, and the bidirectional partial-mesh topology is found to provide the best overall response to the formation error propagation based on the PLN criterion.