The electron pressure in the outer atmosphere of ∈ Eri (K2 V)

Observations of ? Eri (K2 V) have been made with the Space Telescope Imaging Spectrograph on the Hubble Space Telescope. The spectra obtained show a number of emission lines which can be used to determine, or place limits on, the electron density and pressure. Values of the electron pressure are required in order to make quantitative models of the transition region and inner corona from absolute line fluxes, and to constrain semi-empirical models of the chromosphere. Using line flux ratios in Si II and O IV a mean electron pressure of P = NT = 4.8 × 10 cm K is derived. This value is compatible with the lower and upper limits to P found from flux ratios in C III, O V and Fe XII. Some inconsistencies which may be because of small uncertainties in the atomic data used are discussed.

Modelling the H Lyman lines in evolved late-type stars

The importance of partial redistribution (PRD) in the modelling of the Lyman a and Lyman ß emission lines of hydrogen in stellar atmospheres is examined using simple atmospheric models of a range of late-type stars. These models represent the subgiant Procyon (F5 IV-V), and the two giants ß Gem (K0 III) and a Tau (K5 III). These stars are selected to span a wide range of surface gravities: 1.25 <log g <4.00. The calculations are performed using the computer code MULTI with the modifications made by Hubeny & Lites. It is found that PRD effects are highly significant, both in the direct prediction of the Lyman line profiles and in the application of hydrostatic equilibrium to calculate the atmospheric electron density in static atmospheric models.

A Strain-Driven Morphotropic Phase Boundary in BiFeO3

Piezoelectric materials, which convert mechanical to electrical energy and vice versa, are typically characterized by the intimate coexistence of two phases across a morphotropic phase boundary. Electrically switching one to the other yields large electromechanical coupling coefficients. Driven by global environmental concerns, there is currently a strong push to discover practical lead-free piezoelectrics for device engineering. Using a combination of epitaxial growth techniques in conjunction with theoretical approaches, we show the formation of a morphotropic phase boundary through epitaxial constraint in lead-free piezoelectric bismuth ferrite (BiFeO3) films. Electric field-dependent studies show that a tetragonal-like phase can be reversibly converted into a rhombohedral-like phase, accompanied by measurable displacements of the surface, making this new lead-free system of interest for probe-based data storage and actuator applications.

Physical characterisation and component release of poly(vinyl alcohol)-tetrahydroxyborate hydrogels and their applicability as potential topical drug delivery systems

Poly(vinyl alcohol)-tetrahydroxyborate (PVA-THB) hydrogels are dilatant formulations with potential for topical wound management. To support this contention, the physical properties, rheological behaviour and component release of candidate formulations were investigated. Oscillatory rheometry and texture profile analysis were used at room temperature and 37 °C. Results showed that it was possible to control the rheological and textural properties by altering component concentration and modifying the type of PVA polymer used. Hydrogels made using PVA grades with higher degrees of hydrolysis displayed favourable characteristics from a wound healing perspective. In vitro release of borate and PVA were assessed in order to evaluate potential clinical dosing of free species originating from the hydrogel structure. Component diffusion was influenced by both concentration and molecular weight, where relevant, with up to 5% free PVA cumulative release observed after 30 min. The results of this study demonstrated the importance of poly(vinyl alcohol) selection for ensuring appropriate gel formation in PVA-THB hydrogels. The benefits of higher degrees of hydrolysis, in particular, included lower excipient release and reduced bioadhesion. The unique physical characteristics of these hydrogels make them an appealing delivery vehicle for chronic and acute wound management purposes.

Tubular cathode prepared by a dip-coating method for low temperature DMFC

A novel tubular cathode for the direct methanol fuel cell (DMFC) is proposed, based on a tubular titanium mesh. A dip-coating method has been developed for its fabrication. The tubular cathode is composed of titanium mesh, a cathode diffusion layer, a catalyst layer, and a recast Nafion® film. The titanium mesh is present at the inner circumference of the diffusion layer, while the recast Nafion® film is at the outer circumference of the catalyst layer. A DMFC single cell with a 3.5 mgPt cm tubular cathode was able to perform as well, in terms of power density, as a conventional planar DMFC. A peak power density of 9 mW cm was reached under atmospheric air at 25 °C. © 2006 WILEY-VCH Verlag GmbH & Co. KGaA.

The marginal willingness-to-pay for attributes of a hypothetical HIV vaccine

This paper estimates the marginal willingness-to-pay for attributes of a hypothetical HIV vaccine using discrete choice modeling. We use primary data from 326 respondents from Bangkok and Chiang Mai, Thailand, in 2008–2009, selected using purposive, venue-based sampling across two strata. Participants completed a structured questionnaire and full rank discrete choice modeling task administered using computer-assisted personal interviewing. The choice experiment was used to rank eight hypothetical HIV vaccine scenarios, with each scenario comprising seven attributes (including cost) each of which had two levels. The data were analyzed in two alternative specifications: (1) best-worst; and (2) full-rank, using logit likelihood functions estimated with custom routines in Gauss matrix programming language. In the full-rank specification, all vaccine attributes are significant predictors of probability of vaccine choice. The biomedical attributes of the hypothetical HIV vaccine (efficacy, absence of VISP, absence of side effects, and duration of effect) are the most important attributes for HIV vaccine choice. On average respondents are more than twice as likely to accept a vaccine with 99% efficacy, than a vaccine with 50% efficacy. This translates to a willingness to pay US$383 more for a high efficacy vaccine compared with the low efficacy vaccine. Knowledge of the relative importance of determinants of HIV vaccine acceptability is important to ensure the success of future vaccination programs. Future acceptability studies of hypothetical HIV vaccines should use more finely grained biomedical attributes, and could also improve the external validity of results by including more levels of the cost attribute.

Do Children Who Experience Regret Make Better Decisions? A Developmental Study of the Behavioral Consequences of Regret

Although regret is assumed to facilitate good decision making, there is little research directly addressing this assumption. Four experiments (N = 326) examined the relation between children's ability to experience regret and the quality of their subsequent decision making. In Experiment 1 regret and adaptive decision making showed the same developmental profile, with both first appearing at about 7 years. In Experiments 2a and 2b, children aged 6–7 who experienced regret decided adaptively more often than children who did not experience regret, and this held even when controlling for age and verbal ability. Experiment 3 ruled out a memory-based interpretation of these findings. These findings suggest that the experience of regret facilitates children's ability to learn rapidly from bad outcomes.

“I miss being spoon-fed”. A comparison of transition from school to university education from the perspective of undergraduate pharmacy students

Background: The transition from school to university can be challenging and there is increasing concern among academics that students are inadequately prepared for entry to university courses.Aims: To investigate students’ views on transition from school to university education.Method: A focus group was conducted with first-year students and analysed using thematic analysis. Students were invited to participate in an electronic questionnaire; responses were analysed via SPSS for Windows. The Mann– Whitney U test was utilised with p<0.05 set as significant.Results: A response rate of 60% (88/147) was obtained for the questionnaire. Differences included staff-student interactions, learning methods, examination preparation and feedback provision. Many (85%) agreed that the main emphasis in school was on examination preparation; 29.6% considered this to be the case at university (z=-8.315; p<0.05). Most students (95.4%) considered the feedback they received at school helped improve performance; this decreased to 50% when asked about feedback at university (z=-8.326; p<0.05).Conclusion: Students appear to be insufficiently prepared for the demands of higher education. They desire various aspects of their university educational experience to be more akin to that of school, including: a greater level of individual attention, increased access to teaching staff, and further clarification and transparency about the standard required to pass exams. Further work can now be done by academic staff to aid the transition and improve the learning experience.

Multi-Level Wordline Driver for Low Power SRAMs in Nano-Scale CMOS Technology

In this paper, a multi-level wordline driver scheme is presented to improve SRAM read and write stability while lowering power consumption during hold operation. The proposed circuit applies a shaped wordline voltage pulse during read mode and a boosted wordline pulse during write mode. During read, the applied shaped pulse is tuned at nominal voltage for short period of time, whereas for the remaining access time, the wordline voltage is reduced to a lower level. This pulse results in improved read noise margin without any degradation in access time which is explained by examining the dynamic and nonlinear behavior of the SRAM cell. Furthermore, during hold mode, the wordline voltage starts from a negative value and reaches zero voltage, resulting in a lower leakage current compared to conventional SRAM. Our simulations using TSMC 65nm process show that the proposed wordline driver results in 2X improvement in static read noise margin while the write margin is improved by 3X. In addition, the total leakage of the proposed SRAM is reduced by 10% while the total power is improved by 12% in the worst case scenario of a single SRAM cell. The total area penalty is 10% for a 128Kb standard SRAM array.

The current state of abortion law and practice in Northern Ireland

This paper reviews current abortion law and practice in Northern Ireland (NI). It explores the origins of NI's abortion law and its complexity in relation to current practice. it reviews issues relating to women seeking terminations in NI and Great Britain and reviews attempts by the Family Planning Association NI to require the Department of Health and Social Services and Public Safety NI to provide guidance for health professionals engaged in this practice. The paper also discusses some of the issues surrounding abortion in NI and seeks to explain why this subject is causing controversy and debate, especially following a judicial review in February and Marie Stopes opening a termination service in Belfast.

Automatic extraction of reduced-order models from CFD simulations for building energy modelling

Accurate modelling of the internal climate of buildings is essential if Building Energy Management Systems (BEMS) are to efficiently maintain adequate thermal comfort. Computational fluid dynamics (CFD) models are usually utilised to predict internal climate. Nevertheless CFD models, although providing the necessary level of accuracy, are highly computationally expensive, and cannot practically be integrated in BEMS. This paper presents and describes validation of a CFD-ROM method for real-time simulations of building thermal performance. The CFD-ROM method involves the automatic extraction and solution of reduced order models (ROMs) from validated CFD simulations. ROMs are shown to be adequately accurate with a total error below 5% and to retain satisfactory representation of the phenomena modelled. Each ROM has a time to solution under 20seconds, which opens the potential of their integration with BEMS, giving real-time physics-based building energy modelling. A parameter study was conducted to investigate the applicability of the extracted ROM to initial boundary conditions different from those from which it was extracted. The results show that the ROMs retained satisfactory total errors when the initial conditions in the room were varied by ±5°C. This allows the production of a finite number of ROMs with the ability to rapidly model many possible scenarios.

Some Understanding of Fischer-Tropsch Synthesis from Density Functional Theory Calculations

The combination of density functional theory (DFT) calculations and kinetic analyses is a very useful approach to study surface reactions in heterogeneous catalysis. The present paper reviews some recent work applying this approach to Fischer-Tropsch (FT) synthesis. Emphasis is placed on the following fundamental issues in FT synthesis: (i) reactive sites for both hydrogenation and C-C coupling reactions; (ii) reaction mechanisms including carbene mechanism, CO-insertion mechanism and hydroxyl-carbene mechanism; (iii) selectivity with a focus on CH(4) selectivity, alpha-olefin selectivity and chain growth probability; and (iv) activity.

Effect of contact pressure on fretting fatigue behavior of Ti-1023

With a new test facility, we have investigated fretting fatigue properties of Ti-1023 titanium alloy at different contact pressure. Both fatigue fracture and fretting scar were analyzed by scanning electron microscopy (SEM). Moreover, the depth of crack initiation area in fatigue fracture has been analyzed quantitatively, to investigate the relationship between the depth of crack initiation area and the fretting fatigue strength. The changing trends of the depth of crack initiation area and fretting fatigue strength with the increase of contact pressure show obvious opposite correlations. The depth of crack initiation area increases rapidly with the increase of contact pressure at low contact pressure (smaller than 10 MPa), and the fretting fatigue strength drops rapidly. At the contact pressure of 10–45 MPa, both the depth of crack initiation area and the fretting fatigue strength do not vary significantly. Contact pressure influences fatigue strength through influencing the initiation of fatigue crack. The main damage patterns are fatigue flake and plow.