Magnetic and electronic structure of TICo2S2

An extensive investigation of the ferromagnetic compound TlCo2S2 has resulted in new information on the electronic and magnetic structure. Electronic structure calculations showed that magnetic ordering is energetically favorable with a clear driving force for ferromagnetic coupling within the cobalt layers. TlCo2S2 is metallic and the conductivity is due to holes in the valence band. XPS single crystal measurements did not show evidence of mixed oxidation states of cobalt. Neutron powder diffraction resulted in a ferromagnetic structure with the magnetic moment in the ab-plane. The derived magnetic moment of the cobalt atom is 0.65(2) mu(B) at 10 K and is in very good agreement with the value, mu(sat) = 0.65(1) mu(B) at 10 K, inferred from the magnetic hysteresis curve. (C) 2004 Elsevier Inc. All rights reserved.

A Bayesian framework for age modeling of radiocarbon-dated peat deposits: Case studies from the Netherlands

Recently, Bayesian statistical software has been developed for age-depth modeling (wiggle-match dating) of sequences of densely spaced radiocarbon dates from peat cores. The method is described in non-statistical terms, and is compared with an alternative method of chronological ordering of 14C dates. Case studies include the dating of the start of agriculture in the northeastern part of the Netherlands, and of a possible Hekla-3 tephra layer in the same country. We discuss future enhancements in Bayesian age modeling.

Knowledge and perceived competence among nurses caring for the dying in long-term care homes

Background: The quality of care provided to dying long-term care (LTC) residents is often inadequate, which may be due to the lack of formal training that LTC staff receive in palliative care (PC). This cross-sectional study assessed PC knowledge and self-efficacy in ability to provide PC in a sample of registered nurses working in LTC homes. Method: A survey was conducted in four LTC homes in October 2009 to June 2010. Nursing staff knowledge of PC was evaluated using the Palliative Care Quiz for Nurses (PCQN). The Self-Efficacy in End-of-Life Care Survey (S-EOLC) was used to measure nursing staff confidence in their ability to provide PC. Findings: Close to 60% of the nursing staff participated (69 of 119). The participants did not score highly on the PCQN: the average correct score ranged from 52.50% to 63.41% across the homes. There were no significant differences between the homes for the mean number of correct responses on the PCQN (P=0.329) or mean scores for the three S-EOLC subscales. Rank ordering of the percentage of correct PCQN answers by item and LTC home demonstrated that similar misconceptions were held across homes. Conclusion: Despite their confidence in PC practice, the participants' PC knowledge gap reveals a need for PC training for staff working in LTC homes. The PC education and training provided should both include a gerontological perspective and address the expertise and knowledge already held by staff.

Controlling magnetoelectric coupling by nanoscale phase transformation in strain engineered bismuth ferrite

The magnetoelectric coupling in multiferroic materials is promising for a wide range of applications, yet manipulating magnetic ordering by electric field proves elusive to obtain and difficult to control. In this paper, we explore the prospect of controlling magnetic ordering in misfit strained bismuth ferrite (BiFeO3, BFO) films, combining theoretical analysis, numerical simulations, and experimental characterizations. Electric field induced transformation from a tetragonal phase to a distorted rhombohedral one in strain engineered BFO films has been identified by thermodynamic analysis, and realized by scanning probe microscopy (SPM) experiment. By breaking the rotational symmetry of a tip-induced electric field as suggested by phase field simulation, the morphology of distorted rhombohedral variants has been delicately controlled and regulated. Such capabilities enable nanoscale control of magnetoelectric coupling in strain engineered BFO films that is difficult to achieve otherwise, as demonstrated by phase field simulations.

Lorentz TEM investigation of the switching behavior in artificial spin ice building blocks

Frustration – the inability to simultaneously satisfy all interactions – occurs in a wide range of systems including neural networks, water ice and magnetic systems. An example of the latter is the so called spin-ice in pyrochlore materials [1] which have attracted a lot of interest not least due to the emergence of magnetic monopole defects when the ‘ice rules’ governing the local ordering breaks down [2]. However it is not possible to directly measure the frustrated property – the direction of the magnetic moments – in such spin ice systems with current experimental techniques. This problem can be solved by instead studying artificial spin-ice systems where the molecular magnetic moments are replaced by nanoscale ferromagnetic islands [3-8]. Two different arrangements of the ferromagnetic islands have been shown to exhibit spin ice behaviour: a square lattice maintaining four moments at each vertex [3,8] and the Kagome lattice which has only three moments per vertex but equivalent interactions between them [4-7]. Magnetic monopole defects have been observed in both types of lattices [7-8]. One of the challenges when studying these artificial spin-ice systems is that it is difficult to arrive at the fully demagnetised ground-state [6-8].
Here we present a study of the switching behaviour of building blocks of the Kagome lattice influenced by the termination of the lattice. Ferromagnetic islands of nominal size 1000 nm by 100 nm were fabricated in five island blocks using electron-beam lithography and lift-off techniques of evaporated 18 nm Permalloy (Ni80Fe20) films. Each block consists of a central island with four arms terminated by a different number and placement of ‘injection pads’, see Figure 1. The islands are single domain and magnetised along their long axis. The structures were grown on a 50 nm thick electron transparent silicon nitride membrane to allow TEM observation, which was back-coated with a 5 nm film of Au to prevent charge build-up during the TEM experiments.
To study the switching behaviour the sample was subjected to a magnetic field strong enough to magnetise all the blocks in one direction, see Figure 1. Each block obeys the Kagome lattice ‘ice-rules’ of “2-in, 1-out” or “1-in, 2-out” in this fully magnetised state. Fresnel mode Lorentz TEM images of the sample were then recorded as a magnetic field of increasing magnitude was applied in the opposite direction. While the Fresnel mode is normally used to image magnetic domain structures [9] for these types of samples it is possible to deduce the direction of the magnetisation from the Lorentz contrast [5]. All images were recorded at the same over-focus judged to give good Lorentz contrast.
The magnetisation was found to switch at different magnitudes of the applied field for nominally identical blocks. However, trends could still be identified: all the blocks with any injection pads, regardless of placement and number, switched the direction of the magnetisation of their central island at significantly smaller magnitudes of the applied magnetic field than the blocks without injection pads. It can therefore be concluded that the addition of an injection pad lowers the energy barrier to switching the connected island, acting as a nucleation site for monopole defects. In these five island blocks the defects immediately propagate through to the other side, but in a larger lattice the monopoles could potentially become trapped at a vertex and observed [10].
References

[1] M J Harris et al, Phys Rev Lett 79 (1997) p.2554.
[2] C Castelnovo, R Moessner and S L Sondhi, Nature 451 (2008) p. 42.
[3] R F Wang et al, Nature 439 (2006) 303.
[4] M Tanaka et al, Phys Rev B 73 (2006) 052411.
[5] Y Qi, T Brintlinger and J Cumings, Phys Rev B 77 (2008) 094418.
[6] E Mengotti et al, Phys Rev B 78 (2008) 144402.
[7] S Ladak et al, Nature Phys 6 (2010) 359.
[8] C Phatak et al, Phys Rev B 83 (2011) 174431.
[9] J N Chapman, J Phys D 17 (1984) 623.
[10] The authors gratefully acknowledge funding from the EPSRC under grant number EP/D063329/1.

Structure of molten 1,3-dimethylimidazolium chloride using neutron diffraction

The model room temperature ionic liquid, 1,3-dimethylimidazolium chloride, has been studied by neutron diffraction for the first time. The diffraction data are used to derive a structural model of this liquid using Empirical Potential Structure Refinement. The model obtained indicates that significant charge ordering is present in the liquid salt and that the local order in this liquid closely resembles that found in the solid state. As in the crystal structure, hydrogen-bonding interactions between the ring hydrogens and the chloride dominate the structure. The model is compared with the data reported previously for both simple alkyl substituted imidazolium halides and binary mixtures with AlCl3. (C) 2003 American Institute of Physics.

Three narratives in search of a city: Researching Belfast's 'post-conflict' transitions

This paper highlights the role of narratives in expressing, shaping and ordering urban life, and as tools for analysing urban conflicts. The paper distinguishes analytically between two prominent epistemological meta-narratives in contemporary urban studies and multiple ontological narratives in a given city-in this case Belfast. The first meta-narrative represents cities as sites of deepening coercion, violence and inequality and the second sees them as engines of new forms of transnational capitalism. Both are marked by the strategy of specifying 'exemplar' or 'paradigm' cities. The core of the paper addresses how these two meta-narratives map onto and interact with, three contemporary ontological narratives of urban regeneration in Belfast. We conceive of narratives-epistemological and ontological-as analytical tools and objects of analysis but also as tools for social action for competing political and economic interests and coalitions. While in the urban studies literature Belfast is typically studied as an exemplar 'conflict city', it is now being promoted as a 'new capitalist city'. In the context of post-Agreement Belfast, we explore not only the 'pull' of exemplar narratives but also resistances to them that are linked to multiple and hybrid senses of place in the city. We conclude that any significant move beyond the exigencies of rampant commodification or recurring inter-communal antagonism must firstly, encourage new forms of grassroots place-making and, secondly, reform of Belfast's (and Northern Ireland's) fragmented governance structures. © 2013 Copyright Taylor and Francis Group, LLC.

Studies of the Room-Temperature Multiferroic Pb(Fe0.5Ta0.5)0.4(Zr0.53Ti0.47)0.6O3: Resonant Ultrasound Spectroscopy, Dielectric, and Magnetic Phenomena

Recently, lead iron tantalate/lead zirconium titanate (PZTFT) was demonstrated to possess large, but unreliable, magnetoelectric coupling at room temperature. Such large coupling would be desirable for device applications but reproducibility would also be critical. To better understand the coupling, the properties of all 3 ferroic order parameters, elastic, electric, and magnetic, believed to be present in the material across a range of temperatures, are investigated. In high temperature elastic data, an anomaly is observed at the orthorhombic mm2 to tetragonal 4mm transition, Tot = 475 K, and a softening trend is observed as the temperature is increased toward 1300 K, where the material is known to become cubic. Thermal degradation makes it impos- sible to measure elastic behavior up to this temperature, however. In the low temperature region, there are elastic anomalies near ≈40 K and in the range 160–245 K. The former is interpreted as being due to a magnetic ordering transition and the latter is interpreted as a hysteretic regime of mixed rhom- bohedral and orthorhombic structures. Electrical and magnetic data collected below room temperature show anomalies at remarkably similar temperature ranges to the elastic data. These observations are used to suggest that the three order parameters in PZTFT are strongly coupled.

Nucleation-Induced Self-Assembly of Multiferroic BiFeO3-CoFe2O4 Nanocomposites

Large areas of perfectly ordered magnetic CoFe2O4 nanopillars embedded in a ferroelectric BiFeO3 matrix were successfully fabricated via a novel nucleation-induced self-assembly process. The nucleation centers of the magnetic pillars are induced before the growth of the composite structure using anodic aluminum oxide (AAO) and lithography-defined gold membranes as hard mask. High structural quality and good functional properties were obtained. Magneto-capacitance data revealed extremely low losses and magneto-electric coupling of about 0.9 mu C/cmOe. The present fabrication process might be relevant for inducing ordering in systems based on phase separation, as the nucleation and growth is a rather general feature of these systems.

Clamping-induced changes of domain morphology in 88%Pb(Zn1/3Nb2/3)O3-12%PbTiO3 (invited)

Domain microstructures in single crystal lamellae of 88%Pb(Zn1/3Nb2/3)O3-12%PbTiO3 (cut from bulk using focused ion beam milling) have been mapped using both piezoresponse force microscopy and transmission electron microscopy. Dramatic changes from mottled microstructures typical of relaxors to larger scale domains typical of ferroelectrics have been noted. Stresses associated with substrate clamping are suspected as the cause for the transition from short- to long-range polar order, akin to effects induced by cation ordering achieved by thermal quenching.

Measuring the significance of inconsistency in the Viewpoints framework

Measuring inconsistency is crucial to effective inconsistency management in software development. A complete measurement of inconsistency should focus on not only the degree but also the significance of inconsistency. However, most of the approaches available only take the degree of inconsistency into account. The significance of inconsistency has not yet been given much needed consideration. This paper presents an approach for measuring the significance of inconsistency arising from different viewpoints in the Viewpoints framework. We call an individual set of requirements belonging to different viewpoints a combined requirements collection in this paper. We argue that the
significance of inconsistency arising in a combined requirements collection is closely associated with global priority levels of requirements involved in the inconsistency. Here we assume that the global priority level of an individual requirement captures the relative importance of every viewpoint including this requirement as well as the local priority level of the requirement within the viewpoint. Then we use the synthesis of global priority levels of all the requirements in a combined collection to measure the significance of the
collection. Following this, we present a scoring matrix function to measure the significance of inconsistency in an inconsistent combined requirements collection, which describes the contribution made by each subset of the requirements collection to the significance of the set of requirements involved in the inconsistency. An ordering relationship between inconsistencies of two combined requirements collections, termed more significant than, is also presented by comparing their significance scoring matrix functions. Finally, these techniques were implemented in a prototype tool called IncMeasurer, which we developed as a proof of concept.

Establishing a nurse practitioner collaborative: evolution, development, and outcomes

The first Australian palliative care nurse practitioner (NP) was endorsed in 2003. In 2009 the Victoria Department of Health funded the development of the Victorian Palliative Care Nurse Practitioner Collaborative (VPCNPC). Its aim was to promote the NP role, develop resources, and provide education and mentorship to NPs, nurse practitioner candidates (NPCs), and health service managers. Four key objectives were developed: identify the demographic profile of palliative care NPCs in Victoria; develop an education curriculum and practical resources to support the training and education of palliative care NPCs and NPs; provide mentorship to NPs, NPCs, and service managers; and ensure effective communication with all key stakeholders. An NPC survey was also conducted to explore NPC demographics, models of care, the hours of study required for the role, the mentoring process, and education needs. This paper reports on the establishment of the VPCNPC, the steps taken to achieve its objectives, and the results of the survey. The NP role in palliative care in Australia continues to evolve, and the VPCNPC provides a structure and resources to clearly articulate the benefits of the role to nursing and clinical services. The advanced clinical practice role of the nurse practitioner (NP) has been well established in North America for several decades and across a range of specialties (Ryan-Woolley et al, 2007; Poghosyan et al, 2012). The NP role in Australia and the UK is a relatively new initiative that commenced in the early 2000s (Gardner et al, 2009). There are over 1000 NPs across all states and territories of Australia, of whom approximately 130 work in the state of Victoria (Victorian Government Health Information, 2012). Australian NPs work across a range of specialties, including palliative, emergency, older person, renal, cardiac, respiratory, and mental health care. There has been increasing focus nationally and internationally on developing academic programmes specifically for nurses working toward NP status (Gardner et al, 2006). There has been less emphasis on identifying the comprehensive clinical support requirements for NPs and NP candidates (NPCs) to ensure they meet all registration requirements to achieve and/or maintain endorsement, or on articulating the ongoing requirements for NPs once endorsed. Historically in Australia there has been a lack of clarity and limited published evidence on the benefits of the NP role for patients, carers, and health services (Quaglietti et al, 2004; Gardner and Gardner, 2005; Bookbinder et al, 2011; Dyar et al, 2012). An NP is considered to be at the apex of clinical nursing practice. The NP role typically entails comprehensively assessing and managing patients, prescribing medicines, making direct referrals to other specialists and services, and ordering diagnostic investigations (Australian Nursing and Midwifery Council, 2009). All NPs in Australia are required to meet the following generic criteria: be a registered nurse, have completed a Nursing and Midwifery Board of Australia approved postgraduate university Master's (nurse practitioner) degree programme, and be able to demonstrate a minimum of 3 years' experience in an advanced practice role (Nursing and Midwifery Board of Australia, 2011). An NPC in Victoria is a registered nurse employed by a service or organisation to work toward meeting the academic and clinical requirements for national endorsement as an NP. During the period of candidacy, which is of variable duration, NPCs consolidate their competence to work at the advanced practice level of an NP. The candidacy period is a process of learning the new role while engaging with mentors (medical and nursing) and accessing other learning opportunities both within and outside one's organisation to meet the educational requirements. Integral to the NP role is the development of a model of care that is responsive to identified service delivery gaps that can be addressed by the skills, knowledge, and expertise of an NP. These are unique to each individual service. The practice of an Australian NP is guided by national standards (Nursing and Midwifery Board of Australia 2014). It is defined by four overarching standards: clinical, education, research, and leadership. Following the initial endorsement of four Victorian palliative care NPs in 2005, there was a lull in recruitment. The Victoria Department of Health (DH) recognised the potential benefits of NPs for health services, and in 2008 it provided funding for Victorian public health services to scope palliative care NP models of care that could enhance service delivery and patient outcomes. The scoping strategy was effective and led to the appointment of 16 palliative care nurses to NPC positions over the ensuing 3 years. The NPCs work across a broad range of care settings, including inpatient, community, and outpatient in metropolitan, regional, and rural areas of Victoria. At the same time, the DH also funded the Centre for Palliative Care to establish the Victorian Palliative Care Nurse Practitioner Collaborative (VPCNPC) to support the NPs and NPCs. The Centre is a state-wide service that is part of St Vincent's Hospital Melbourne and a collaborative Centre of the University of Melbourne. Its primary function is to provide training and conduct research in palliative care. The purpose of the VPCNPC was to provide support and mentorship and develop resources targeted at palliative care NPs, NPCs, and health service managers. Membership of the VPCNPC is open to all NPs, NPCs, health service managers, and nurses interested in the NP role. The aim of this paper is to describe the development of the VPCNPC, its actions, and the outcomes of these actions.

Material Waste in the Northern Ireland Construction Industry: On-Site Management Causes and Methods of Prevention

The construction industry in Northern Ireland is one of the major contributors of construction waste to landfill each year. The aim of this research paper is to identify the core on-site management causes of material waste on construction sites in Northern Ireland and to illustrate various methods of prevention which can be adopted. The research begins with a detailed literature review and is complemented with the conduction of semi-structured interviews with 6 professionals who are experienced and active within the Northern Ireland construction industry. Following on from the literature review and interviews analysis, a questionnaire survey is developed to obtain further information in relation to the subject area. The questionnaire is based on the key findings of the previous stages to direct the research towards the most influential factors. The analysis of the survey responses reveals that the core causes of waste generation include a rushed program, poor handling and on-site damage of materials, while the principal methods of prevention emerge as the adequate storage, the reuse of material on-site and efficient material ordering. Furthermore, the role of the professional background in the shaping of perceptions relevant to waste management is also investigated and significant differences are identified. The findings of this research are beneficial for the industry as they enhance the understanding of construction waste generation causes and highlight the practices required to reduce waste on-site in the context of sustainable development.

Tephra from andesitic Shiveluch volcano, Kamchatka, NW Pacific: chronology of explosive eruptions and geochemical fingerprinting of volcanic glass

The ~16-ka-long record of explosive eruptions from Shiveluch volcano (Kamchatka, NW Pacific) is refined using geochemical fingerprinting of tephra and radiocarbon ages. Volcanic glass from 77 prominent Holocene tephras and four Late Glacial tephra packages was analyzed by electron microprobe. Eruption ages were estimated using 113 radiocarbon dates for proximal tephra sequence. These radiocarbon dates were combined with 76 dates for regional Kamchatka marker tephra layers into a single Bayesian framework taking into account the stratigraphic ordering within and between the sites. As a result, we report ~1,700 high-quality glass analyses from Late Glacial–Holocene Shiveluch eruptions of known ages. These define the magmatic evolution of the volcano and provide a reference for correlations with distal fall deposits. Shiveluch tephras represent two major types of magmas, which have been feeding the volcano during the Late Glacial–Holocene time: Baidarny basaltic andesites and Young Shiveluch andesites. Baidarny tephras erupted mostly during the Late Glacial time (~16–12.8 ka BP) but persisted into the Holocene as subordinate admixture to the prevailing Young Shiveluch andesitic tephras (~12.7 ka BP–present). Baidarny basaltic andesite tephras have trachyandesite and trachydacite (SiO₂ < 71.5 wt%) glasses. The Young Shiveluch andesite tephras have rhyolitic glasses (SiO₂ > 71.5 wt%). Strongly calc-alkaline medium-K characteristics of Shiveluch volcanic glasses along with moderate Cl, CaO and low P₂O₅ contents permit reliable discrimination of Shiveluch tephras from the majority of other large Holocene tephras of Kamchatka. The Young Shiveluch glasses exhibit wave-like variations in SiO₂ contents through time that may reflect alternating periods of high and low frequency/volume of magma supply to deep magma reservoirs beneath the volcano. The compositional variability of Shiveluch glass allows geochemical fingerprinting of individual Shiveluch tephra layers which along with age estimates facilitates their use as a dating tool in paleovolcanological, paleoseismological, paleoenvironmental and archeological studies. Electronic tables accompanying this work offer a tool for statistical correlation of unknown tephras with proximal Shiveluch units taking into account sectors of actual tephra dispersal, eruption size and expected age. Several examples illustrate the effectiveness of the new database. The data are used to assign a few previously enigmatic wide-spread tephras to particular Shiveluch eruptions. Our finding of Shiveluch tephras in sediment cores in the Bering Sea at a distance of ~600 km from the source permits re-assessment of the maximum dispersal distances for Shiveluch tephras and provides links between terrestrial and marine paleoenvironmental records.

On the Merit of Selecting Different Belief Merging Operators

Belief merging operators combine multiple belief bases (a profile) into a collective one. When the conjunction of belief bases is consistent, all the operators agree on the result. However, if the conjunction of belief bases is inconsistent, the results vary between operators. There is no formal manner to measure the results and decide on which operator to select. So, in this paper we propose to evaluate the result of merging operators by using three ordering relations (fairness, satisfaction and strength) over operators for a given profile. Moreover, a relation of conformity over operators is introduced in order to classify how well the operator conforms to the definition of a merging operator. By using the four proposed relations we provide a comparison of some classical merging operators and evaluate the results for some specific profiles.