Increased Promiscuity of Human Galactokinase Following Alteration of a Single Amino Acid Residue Distant from the Active Site

Galactokinase catalyses the site-and stereospecific phosphorylation of galactose at the expense of ATP. The specificity of bacterial galactokinase enzymes can be broadened by alteration of a tyrosine residue to a histidine. The effects of altering the equivalent residue in human galactokinase (Tyr379) were investigated by testing all 19 possible variants. All of these alterations, except Y379P, resulted in soluble protein on expression in Escherichia coli and all the soluble variants could catalyse the phosphorylation of galactose, except Y379A and Y379E. The variants Y379C, Y379K, Y379R, Y379S and Y379W were all able to catalyse the phosphorylation of a variety of monosaccharides, including ones that are not acted on by the wild-type enzyme. Novel substrates for these variant galactokinases included D-mannose and D-fructose. The latter monosaccharide is presumed to react in the pyranose configuration. Molecular modelling suggested that the alterations do not cause changes to the overall structure of the enzyme. However, alteration of Tyr379 increases the flexibility of the peptide backbone in regions surrounding the active site. Therefore, it is proposed that alteration of Tyr379 affects the substrate specificity by the propagation of changes in flexibility to the active site, permitting a broader range of compounds to be accommodated.

Biosynthetic Chlorination of the Piperazate Residue in Kutzneride Biosynthesis by KthP

Kutznerides 2 and 8 of the cyclic hexadepsipeptide family of antifungal natural products from the soil actinomycete Kutzneria sp. 744 contain two sets of chlorinated residues, a 6,7-dichlorohexahydropyrroloindole moiety derived from dichlorotryptophan and a 5-chloropiperazate moiety, as well as a methylcyclopropylglycine residue that may arise from isoleucine via a cryptic chlorination pathway. Previous studies identified KtzD, KtzQ and KtzR as three halogenases in the kutzneride pathway but left no candidate for installing the CS chlorine on piperazate. On the basis of analysis of the complete genome sequence of Kutzneria, we now identify a fourth halogenase in the pathway whose gene is separated from the defined kutzneride cluster by 12 open reading frames. KthP (kutzneride halogenase for piperazate) is a mononuclear nonheme iron halogenase that acts on the piperazyl ring tethered by a thioester linkage to the holo forms of thiolation domains. MS analysis of the protein-bound product confirmed chlorination of the piperazate framework from the (3S)- but not the (3R)-piperazyl-S-pantetheinyl thiolation proteins. After thioesterase-mediated release, nuclear magnetic resonance was used to assign the free imino acid as (3S,5S)-5-chloropiperazate, distinct from the 3S,5R stereoisomer reported in the mature kutznerides. These results demonstrate that a fourth halogenase, KthP, is active in the kutzneride biosynthetic pathway and suggest further processing of the (3S,5S)-5-chloropiperazate during subsequent incorporation into the kutzneride depsipeptide frameworks.

Experimental Investigation of Stretch Blow Molding, Part 1: Instrumentation in an Industrial Environment

In spite of intensive research, computational modeling of the injection stretch blow molding (ISBM) still cannot match the accuracy of other polymer processes such as injection molding. There is a lack of understanding of the interdependence among the machine parameters set up by the operators, process parameters, material behavior, and the resulting final thickness distribution and performance of the molded product. The work presented in this paper describes a set of instrumentation tools developed for investigation of the ISBM process in an industrial setting. Results are presented showing the pressure and air temperature evolution inside the mold, the stretch rod force and displacement history, and the moment of contact of the polymer with seven discrete locations on the mold.

Influence of unit operations on the levels of polyacetylenes in minimally processed carrots and parsnips: An industrial trial

Carrots and parsnips are often consumed as minimally processed ready-to-eat convenient foods and contain in minor quantities, bioactive aliphatic C17-polyacetylenes (falcarinol, falcarindiol, falcarindiol-3-acetate). Their retention during minimal processing in an industrial trial was evaluated. Carrot and parsnips were prepared in four different forms (disc cutting, baton cutting, cubing and shredding) and samples were taken in every point of their processing line. The unit operations were: peeling, cutting and washing with chlorinated water and also retention during 7 days storage was evaluated. The results showed that the initial unit operations (mainly peeling) influence the polyacetylene retention. This was attributed to the high polyacetylene content of their peels. In most cases, when washing was performed after cutting, less retention was observed possibly due to leakage during tissue damage occurred in the cutting step. The relatively high retention during storage indicates high plant matrix stability. Comparing the behaviour of polyacetylenes in the two vegetables during storage, the results showed that they were slightly more retained in parsnips than in carrots. Unit operations and especially abrasive peeling might need further optimisation to make them gentler and minimise bioactive losses.

Burnout as a predictor of all-cause mortality among industrial employees: A 10-year prospective register-linkage study

Objective: Burnout, a psychological consequence of prolonged work stress, has been shown to coexist with physical and mental disorders. The aim of this study was to investigate whether burnout is related to all-cause mortality among employees. Methods: In 1996, of 15,466 Finnish forest industry employees, 9705 participated in the 'Still Working' study and 8371 were subsequently identified from the National Population Register. Those who had been treated in a hospital for the most common causes of death prior to the assessment of burnout were excluded on the basis of the Hospital Discharge Register, resulting in a final study population of 7396 people. Burnout was measured using the Maslach Burnout Inventory-General Survey. Dates of death from 1996 to 2006 were extracted from the National Mortality Register. Mortality was predicted with Cox hazard regression models, controlling for baseline sociodemographic factors and register-based health status according to entitled medical reimbursement and prescribed medication for mental health problems, cardiac risk factors, and pain problems. Results: During the 10-year 10-month follow-up, a total of 199 employees had died. The risk of mortality per one-unit increase in burnout was 35% higher (95% CI 1.07-1.71) for total score and 26% higher (0.99-1.60) for exhaustion, 29% higher for cynicism (1.03-1.62), and 22% higher for diminished professional efficacy (0.96-1.55) in participants who had been under 45 at baseline. After adjustments, only the associations regarding burnout and exhaustion were statistically significant. Burnout was not related to mortality among the older employees. Conclusion: Burnout, especially work-related exhaustion, may be a risk for overall survival. (C) 2010 Elsevier Inc. All rights reserved.

Lack of Predictability at Work and Risk of Acute Myocardial Infarction: An 18-Year Prospective Study of Industrial Employees

Objectives. We examined whether the distinctive components of job control-decision authority, skill discretion, and predictability-were related to subsequent acute myocardial infarction (MI) events in a large population of initially heart disease-free industrial employees.

Thin catalytic coatings on microreactor walls A way to make industrial processes more efficient

Current trends in the development of microstructured reactors with thin catalytic films (from 100 nm up to several microns) that have self-assembled nanostructures are discussed. A major technique that is used to prepare such films is sol-gel processing. This involves depositing a complex fluid on a microstructured substrate by dip, spin, or spray coating, followed by surfactant removal to form the porous nanostructures. A novel methodology has been developed by which a uniform coating containing controlled amounts of (poly) metallic nanoparticles can be obtained. This elegant strategy is based on the condensation of metal oxide species by self-assembly in the presence of metallic colloids. The potential microreactor applications brought forth by this innovative protocol are placed in perspective in the light of its versatility.

OBSERVATIONS ON THE EFFECTS OF LONG-TERM WITHDRAWAL ON CARCASS COMPOSITION AND RESIDUE CONCENTRATIONS IN CLENBUTEROL-MEDICATED CATTLE

The detection of the illegal use of clenbuterol (CBL) as a growth promoter has relied on detecting residual concentrations of the drug in body fluids or tissues. Analysis of retinal extracts has recently been shown to considerably extend the detection period following withdrawal. The withdrawal periods required to eliminate residues from the liver and retina were investigated by medicating 20 cattle with CBL for 30 days; 6 control animals remained unmedicated. Residual concentrations were monitored throughout this period and for the subsequent 140 days. Concurrent changes in muscle areas and backfat thicknesses were recorded by ultrasound.

Development and validation of a method for the confirmation of nicarbazin in chicken liver and eggs using LC-electrospray MS-MS according to the revised EU criteria for veterinary drug residue analysis

A method is described for the quantitative confirmation of 4,4'-dinitrocarbanilide (DNC), the marker residue for nicarbazin in chicken liver and eggs. The method is based on LC coupled to negative ion electrospray MS-MS of tissue extracts prepared by liquid-liquid extraction. The [M-H](-) ion at m/z 301 is monitored along with two transition ions at m/z 137 and 107 for DNC and the [M-H](-) ion at m/z 309 for the internal standard, d(8)-DNC. The method has been validated according to the new EU criteria for the analysis of veterinary drug residues at 100, 200 and 300 mug kg(-1) in liver and at 10, 30 and 100 mug kg(-1) in eggs. Difficulties concerning the application of the new analytical limits, namely the decision limit (CC) and the detection capability (CC) to the determination of DNC in both liver and eggs are discussed.