ELM-induced transient tungsten melting in the JET divertor

The original goals of the JET ITER-like wall included the study of the impact of an all W divertor on plasma operation (Coenen et al 2013 Nucl. Fusion 53 073043) and fuel retention (Brezinsek et al 2013 Nucl. Fusion 53 083023). ITER has recently decided to install a full-tungsten (W) divertor from the start of operations. One of the key inputs required in support of this decision was the study of the possibility of W melting and melt splashing during transients. Damage of this type can lead to modifications of surface topology which could lead to higher disruption frequency or compromise subsequent plasma operation. Although every effort will be made to avoid leading edges, ITER plasma stored energies are sufficient that transients can drive shallow melting on the top surfaces of components. JET is able to produce ELMs large enough to allow access to transient melting in a regime of relevance to ITER.

Transient W melt experiments were performed in JET using a dedicated divertor module and a sequence of I-P = 3.0 MA/B-T = 2.9 T H-mode pulses with an input power of P-IN = 23 MW, a stored energy of similar to 6 MJ and regular type I ELMs at Delta W-ELM = 0.3 MJ and f(ELM) similar to 30 Hz. By moving the outer strike point onto a dedicated leading edge in the W divertor the base temperature was raised within similar to 1 s to a level allowing transient, ELM-driven melting during the subsequent 0.5 s. Such ELMs (delta W similar to 300 kJ per ELM) are comparable to mitigated ELMs expected in ITER (Pitts et al 2011 J. Nucl. Mater. 415 (Suppl.) S957-64).

Although significant material losses in terms of ejections into the plasma were not observed, there is indirect evidence that some small droplets (similar to 80 mu m) were released. Almost 1 mm (similar to 6 mm(3)) of W was moved by similar to 150 ELMs within 7 subsequent discharges. The impact on the main plasma parameters was minor and no disruptions occurred. The W-melt gradually moved along the leading edge towards the high-field side, driven by j x B forces. The evaporation rate determined from spectroscopy is 100 times less than expected from steady state melting and is thus consistent only with transient melting during the individual ELMs. Analysis of IR data and spectroscopy together with modelling using the MEMOS code Bazylev et al 2009 J. Nucl. Mater. 390-391 810-13 point to transient melting as the main process. 3D MEMOS simulations on the consequences of multiple ELMs on damage of tungsten castellated armour have been performed.

These experiments provide the first experimental evidence for the absence of significant melt splashing at transient events resembling mitigated ELMs on ITER and establish a key experimental benchmark for the MEMOS code.

Transition from Children’s to Adult Services forYoung People with Life-limiting Conditions: Findings from a Questionnaire Survey in Northern Ireland

Research aims: 
To describe service provision for the transition from children’s to adult services for young people with life-limiting conditions in Northern Ireland, and to identify organisational factors that promote or inhibit effective transition. 
Study population: 
Health, social, educational and charitable organisations providing transition services to young people with life-limiting conditions in Northern Ireland. 
Study design and methods: 
A questionnaire has been developed by the research team drawing on examples from the literature and the advice of an expert advisory group. The questionnaire was piloted with clinicians,academics and researchers in June 2013. The questionnaire focuses on components of practice which may promote continuity in the transition from child to adult care for young people with a life-limiting condition. The survey will be distributed throughout Northern Ireland to an estimated 75 organisations, following the Dillman total design survey method. Numerical data will be analysed using PASW Statistical software to generate descriptive statistics along with a thematic analysis of data generated by open-ended questions. 
Results and interpretations: 
The survey will provide a description of services, transition policies, approaches to managing transition, categories of service users, the ages at which transition starts and completes, experiences with minority ethnic groups, the input of service users to the process, organisational factors promoting or hindering effective transition, links between services, and service providers’ recommendations for improvements in services.The outcomes will be an overview of the transition services currently provided in Northern Ireland identifying models of good practice and the key factors influencing the quality, safety and continuity of care. Survey results are due early in 2014.

Ecology of testate amoebae in an Amazonian peatland and development of a transfer function for palaeohydrological reconstruction

Tropical peatlands represent globally important carbon sinks with a unique biodiversity and are currently threatened by climate change and human activities. It is now imperative that proxy methods are developed to understand the ecohydrological dynamics of these systems and for testing peatland development models. Testate amoebae have been used as environmental indicators in ecological and palaeoecological studies of peatlands, primarily in ombrotrophic Sphagnum-dominated peatlands in the mid- and high-latitudes. We present the first ecological analysis of testate amoebae in a tropical peatland, a nutrient-poor domed bog in western (Peruvian) Amazonia. Litter samples were collected from different hydrological microforms (hummock to pool) along a transect from the edge to the interior of the peatland. We recorded 47 taxa from 21 genera. The most common taxa are Cryptodifflugia oviformis, Euglypha rotunda type, Phryganella acropodia, Pseudodifflugia fulva type and Trinema lineare. One species found only in the southern hemisphere, Argynnia spicata, is present. Arcella spp., Centropyxis aculeata and Lesqueresia spiralis are indicators of pools containing standing water. Canonical correspondence analysis and non-metric multidimensional scaling illustrate that water table depth is a significant control on the distribution of testate amoebae, similar to the results from mid- and high-latitude peatlands. A transfer function model for water table based on weighted averaging partial least-squares (WAPLS) regression is presented and performs well under cross-validation (r 2apparent=0.76,RMSE=4.29;r2jack=0.68,RMSEP=5.18. The transfer function was applied to a 1-m peat core, and sample-specific reconstruction errors were generated using bootstrapping. The reconstruction generally suggests near-surface water tables over the last 3,000 years, with a shift to drier conditions at c. cal. 1218-1273 AD

LC- HRMS based metabolomics in food safety and doping control – DeTECH21

Issues surrounding the misuse of prohibited and licensed substances in animals destined for food production and performance sport competition continue to be an enormous challenge to regulatory authorities charged with enforcing their control. Efficient analytical strategies are implemented to screen and confirm the presence of a wide range of exogenous substances in various biological matrices. However, such methods rely on the direct measurement of drugs and/or their metabolites in a targeted mode, allowing the detection of restricted number of compounds. As a consequence, emerging practices, in particular the use of natural hormones, designer drugs and low-dose cocktails, remain difficult to handle from a control point of view. A new SME-led FP7 funded project, DeTECH21, aims to overcome current limitations by applying an untargeted metabolomics approach based on liquid chromatography coupled to high resolution mass spectrometry and bioinformatic data analysis to identify bovine and equine animals which have been exposed to exogenous substances and assist in the identification of administered compounds. Markerbased strategies, dealing with the comprehensive analysis of metabolites present in a biological sample (urine/plasma/tissue), offer a reliable solution in the areas of food safety and animal sport doping control by effective, high-throughput and sensitive detection of exogenously administered agents. Therefore, the development of the first commercially available forensic test service based on metabolomics profiling will meet 21st century demands in animal forensics.

Pharmacogenetics and the print media: what is the public told?

Background: Pharmacogenetics is a rapidly growing field that aims to identify the genes that influence drug response. This science can be used as a powerful tool to tailor drug treatment to the genetic makeup of individuals. The present study explores the coverage of the topic of pharmacogenetics and its potential benefit in personalised medicine by the UK newsprint media. 

Methods: The LexisNexis database was used to identify and retrieve full text articles from the 10 highest circulation national daily newspapers and their Sunday equivalents in the UK. Content analysis of newspaper articles which referenced pharmacogenetic testing was carried out. A second researcher coded a random sample (21%) of newspaper articles to establish the inter-rater reliability of coding. 

Results: Of the 256 articles captured by the search terms, 96 articles (with pharmacogenetics as a major component) met the study inclusion criteria. The majority of articles over-stated the benefits of pharmacogenetic testing while paying less attention to the associated risks. Overall beneficial effects were mentioned 5.3 times more frequently than risks (p < 0.001). The most common illnesses for which pharmacogenetically based personalised medicine was discussed were cancer, cardiovascular disease and CNS diseases. Only 13% of newspaper articles that cited a specific scientific study mentioned this link in the article. There was a positive correlation between the size of the article and both the number of benefits and risks stated (P < 0.01). 

Conclusion: More comprehensive coverage of the area of personalised medicine within the print media is needed to inform public debate on the inclusion of pharmacogentic testing in routine practice.

Magnetic Characteristics of a High-layer-number NiFe/FeMn Multilayer

We report the static & dynamic magnetic characteristics of a high-layer-number NiFe/FeMn multilayer test structure with potential applications in broadband absorber and filter devices. To allow fine control over the absorption linewidths and to understand the mechanisms governing the resonances in a tailored structure similar to that expected to be used in real world applications, the multilayer was intentionally designed to have layer thickness and interface roughness variations. Magnetometry measurements show the sample has complex hysteresis loops with features consistent with single ferromagnetic film reversals. Structural characterisation by transmission electron microscopy allows us to correlate the magnetic properties with structural features. Analysis of resonance frequencies from broadband ferromagnetic resonance measurements as a function of field magnitude and orientation provide values of the local exchange bias, rotatable anisotropy, and uniaxial anisotropy fields for specific layers in the stack and explain the observed mode softening. The linewidths of the multilayer are adjustable around the bias field, approaching twice that seen at larger fields, allowing control over the bandwidth of devices formed from the structure.

Extracting statistically dominant modes of a steel truss bridge from vehicle-induced vibrations

This study is intended to investigate the validity of the stability diagram (SD) aided multivariate autoregressive (MAR) analysis for identifying modal parameters of a real truss bridge. The MAR models are adopted to fit the time series of the dynamic accelerations recorded from a number of observation points on the bridge; then the modal parameters are extracted from the MAR model coefficient matrix. The SD is adopted to determine statistically dominant modes. In plotting the SD, a number of stability criteria are further adopted for filtering out those modes with unstable modal parameters. By the present method, the first five modal frequencies and mode shapes are identified with very high precision, while the damping ratios are identified with high precision for the 1st mode but with poorer precision for higher modes. Moreover, the ability of the SD in selecting structural modes without getting involved in any model-order optimization problem is highlighted through a comparison study.

Experimental analysis of air flow profiles in a double skin facade in a maritime climate

Glazed Double Skin Facades (DSF) offer the potential to improve the performance of all-glass building skins, common to commercial office buildings in which full facade glazing has almost become the standard. Single skin glazing results in increased heating and cooling costs over opaque walls, due to lower thermal resistance of glass, and the increased impact of solar gain through it. However, the performance benefit of DSF technology continues to be questioned and its operation poorly understood, particularly the nature of airflow through the cavity. This paper deals specifically with the experimental analysis of the air flow characteristics in an automated double skin façade. The benefit of the DSF as a thermal buffer, and to limit overheating is evaluated through analysis of an extensive set of parameters including air and surface temperatures at each level in the DSF, airflow readings in the cavity and at the inlet and outlet, solar and wind data, and analytically derived pressure differentials. The temperature and air-flow are monitored in the cavity of a DSF using wireless sensors and hot wire anemometers respectively. Automated louvre operation and building set-points are monitored via the BMS. Thermal stratification and air flow variation during changing weather conditions are shown to effect the performance of the DSF considerably and hence the energy performance of the building. The relative pressure effects due to buoyancy and wind are analysed and quantified. This research aims to developed and validate models of DSFs in the maritime climate, using multi-season data from experimental monitoring. This extensive experimental study provides data for training and validation of models.

Changes in epilithic biomasses and invertebrate community structure over a deposit metal concentration gradient in upland headwater streams

Stream bed metal deposits affect the taxon richness, density and taxonomic diversity of primary and secondary producers by a variety of direct or indirect abiotic and biotic processes but little is known about the relative importance of these processes over a deposit metal concentration gradient. Inorganic matter (IM), algal and non-photosynthetic detrital (NPD) dry biomasses were estimated for 10 monthly samples, between 2007 and 2008, from eight sites differing in deposit density. Invertebrate abundance, taxon richness and composition were also determined. Relations between these variables were investigated by canonical correspondence analysis (CCA), generalized estimating equation models and path analysis. The first CCA axis correlates with deposit density and invertebrate abundance, with lumbriculids and chironomids increasing in abundance with deposit density and all other taxa declining. Community structure changes significantly above a deposit density of approximately 8 mg cm, when algal biomass, invertebrate richness and diversity decline. Invertebrate richness and diversity were determined by direct effects of NPD biomass and indirect effects of IM. Algal biomass only had an effect on invertebrate abundance. Possible pH, oxygen, food and ecotoxicological effects of NPD biomass on the biota are discussed.

Dyslipidemia and Diabetic Macular Edema: A Systematic Review and Meta-Analysis

Topic: A systematic review and meta-analysis of dyslipidemia and diabetic macular edema (DME). 

Clinical Relevance: Diabetic macular edema causes impairment of vision in patients with diabetes, and dyslipidemia has been reported as a risk factor for its development. A systematic review with a meta-analysis was undertaken to examine the evidence of an association between dyslipidemia and DME. 

Methods: We defined eligibility criteria as randomized controlled trials (RCTs) and cohort, case-control, and cross-sectional studies reporting on the relationship between blood lipid levels and DME. We performed a literature search in MEDLINE, PubMed, and Embase from inception to September 2014. We used the NewcastleeOttawa scale to assess the quality of case-control, cross-sectional, and cohort studies, and the Cochrane risk of bias tool for RCTs. 

Results: The search strategy identified 4959 publications. After screening, we selected 21 articles for review (5 cross-sectional, 5 cohort, 7 case-control, and 4 RCTs). Meta-analysis of case-control studies revealed that mean levels of total serum cholesterol (TC), low-density lipoproteins (LDLs), and serum triglycerides (TGs) were significantly higher in patients with DME compared with those without DME (TC: 30.08; 95% confidence interval [CI], 21.14e39.02; P < 0.001; LDL: 18.62; 95% CI, 5.80e31.43; P < 0.05; TG: 24.82; 95% CI, 9.21e40.42; P < 0.05). Meta-analysis of RCTs did not show significant risk in worsening of hard exudates and severity of DME in the lipid-lowering group compared with placebo (hard exudates: relative risk, 1.00; 95% CI, 0.47e2.11; P ¼ 1.00; DME: relative risk, 1.18; 95% CI, 0.75e1.86; P ¼ 0.48). 

Conclusions: Despite evidence from the cohort studies and meta-analysis of the case-control studies suggesting a strong relationship between lipid levels and DME, this was not confirmed by the meta-analysis that included only prospective RCTs. Therefore, given the significant public health relevance of the topic, the relationship between lipid levels and DME deserves further investigation.

Raman spectra of SiC nanorods with different excitation wavelengths

With increasing excitation wavelength from 514 to 782 nm, a significant difference in the Raman spectra of SiC nanorods was observed as compared to bulk material. The intensity ratio of the LO mode to that of the IF mode increases with the excitation wavelength increasing. This has been identified as resonant Raman scattering caused by Fröhlich interaction.

LS-ADT: Lightweight and Scalable Anomaly Detection for Cloud Datacentres

Cloud data centres are implemented as large-scale clusters with demanding requirements for service performance, availability and cost of operation. As a result of scale and complexity, data centres typically exhibit large numbers of system anomalies resulting from operator error, resource over/under provisioning, hardware or software failures and security issus anomalies are inherently difficult to identify and resolve promptly via human inspection. Therefore, it is vital in a cloud system to have automatic system monitoring that detects potential anomalies and identifies their source. In this paper we present a lightweight anomaly detection tool for Cloud data centres which combines extended log analysis and rigorous correlation of system metrics, implemented by an efficient correlation algorithm which does not require training or complex infrastructure set up. The LADT algorithm is based on the premise that there is a strong correlation between node level and VM level metrics in a cloud system. This correlation will drop significantly in the event of any performance anomaly at the node-level and a continuous drop in the correlation can indicate the presence of a true anomaly in the node. The log analysis of LADT assists in determining whether the correlation drop could be caused by naturally occurring cloud management activity such as VM migration, creation, suspension, termination or resizing. In this way, any potential anomaly alerts are reasoned about to prevent false positives that could be caused by the cloud operator’s activity. We demonstrate LADT with log analysis in a Cloud environment to show how the log analysis is combined with the correlation of systems metrics to achieve accurate anomaly detection.