Internet Use and Psychological Well-being among 10-year-old and 11-year-old Children

This paper uses data from the 2009 Kids’ Life and Times Survey, involving 3657 children aged 10 or 11 years old in Northern Ireland. The survey indicated high levels of use of Internet applications, including social-networking sites and online games. Using the KIDSCREEN-27 instrument, the data indicate that the use of social-networking sites and online games is related to poorer psychological well-being among girls, but not boys. Boys and girls who experience “cyberbullying” have poorer psychological well-being. This association between psychological well-being and some Internet applications merits more attention in future research and policy development.

Textural, viscoelastic and mucoadhesive properties of pharmaceutical gels composed of cellulose polymers

This study examined the mechanical/textural, viscoeiastic and mucoadhesive properties of a range of aqueous gels composed of either hydroxyethylcellulose (HEC) or sodium carboxymethylcellulose (Na CMC). The mechanical/textural properties of each formulation were determined using texture profile analysis. The viscoelastic properties of each formulation were examined over a defined frequency range (0.01-1.0 Hz) using oscillatory rheometry in conjunction with stainless steel parallel plate geometry. The mucoadhesive properties of the gels were evaluated by measuring the tensile force required to overcome the gel/mucin adhesive interaction. Both gel hardness and compressibility, properties that affect the ease of product removal from a container and spreadability, increased as a function of increasing polymer concentrations. This is attributed to the effects of HEC and Na CMC on gel viscosity. Gel adhesiveness, a property related to bioadhesion, also increased as a function of polymer concentration and is attributed to the reported adhesive nature of these polymers. Increasing frequency of oscillation increased the storage and loss moduli yet decreased bath the dynamic viscosity of each gel type and also the loss tangent of HEC (but not Na CMC) gels. Therefore, following exposure to the range of oscillatory stresses that may be expected in vivo, HEC gels will be more susceptible than Na CMC gels to alterations in these rheological properties. Consequently, it would be expected that the clinical performance of HEC gels will be modified to a greater extent than Na CMC gels. In general, HEC gels exhibited a greater elastic nature than Na CMC gels over the frequency range employed for oscillation The storage and loss moduli and dynamic viscosity of both gel types increased, yet the loss tangent of both gel types decreased as a function of increasing polymer concentration. Gel mucoadhesive strength was dependent on both the time of contact of the formulation with mucin and also on polymer concentration. In conclusion, this study has characterised a number of gels containing either HEC or Na CMC in terms of their mechanical/textural, viscoelastic and mucoadhesive properties. Due to its relevance to the clinical performance, it is suggested that the information derived from these methods may be usefully combined to provide a more rational basis for the selection of polymers and their formulation as topical drug delivery systems. (C) 1997 Elsevier Science B.V.

Measurement of interaction strength innature

Understanding and predicting the dynamics of multispecies systems generally require estimates of interaction strength among species. Measuring interaction strength is difficult because of the large number of interactions in any natural system, long-term feedback, multiple pathways of effects between species pairs, and possible nonlinearities in interaction-strength functions. Presently, the few studies that extensively estimate interaction strength suggest that distributions of interaction strength tend to be skewed toward few strong and many weak interactions. Modeling studies indicate that such skewed patterns tend to promote system stability and arise during assembly of persistent communities. Methods for estimating interaction strength efficiently from traits of organisms, such as allometric relationships, show some promise. Methods for estimating community response to environmental perturbations without an estimate of interaction strength may also be of use. Spatial and temporal scale may affect patterns of interaction strength, but these effects require further investigation and new multispecies modeling frameworks. Future progress will be aided by development of long-term multispecies time series of natural communities, by experimental tests of different methods for estimating interaction strength, and by increased understanding of nonlinear functional forms.

Preparation and Evaluation of Sustained-Release Matrix Tablets Based on Metoprolol and an Acrylic Carrier Using Injection Moulding

Sustained-release matrix tablets based on Eudragit RL and RS were manufactured by injection moulding. The influence of process temperature; matrix composition; drug load, plasticizer level; and salt form of metoprolol: tartrate (MPT), fumarate (MPF) and succinate (MPS) on ease of processing and drug release were evaluated. Formulations composed of 70/30% Eudragit RL/MPT showed the fastest drug release, substituting part of Eudragit RL by RS resulted in slower drug release, all following first-order release kinetics. Drug load only affected drug release of matrices composed of Eudragit RS: a higher MPT concentration yielded faster release rates. Adding triethyl citrate enhanced the processability, but was detrimental to long-term stability. The process temperature and plasticizer level had no effect on drug release, whereas metoprolol salt form significantly influenced release properties. The moulded tablets had a low porosity and a smooth surface morphology. A plasticizing effect of MPT, MPS and MPF on Eudragit RS and Eudragit RL was observed via DSC and DMA. Solubility parameter assessment, thermal analysis and X-ray diffraction demonstrated the formation of a solid solution immediately after production, in which H-bonds were formed between metoprolol and Eudragit as evidenced by near-infrared spectroscopy. However, high drug loadings of MPS and MPF showed a tendency to recrystallise during storage. The in vivo performance of injection-moulded tablets was strongly dependent upon drug loading. © 2012 American Association of Pharmaceutical Scientists.

A comparison of real-time and store-and-forward teledermatology:a cost-benefit study

Increasing use of teledermatology should be based on demonstration of favourable accuracy and cost-benefit analysis for the different methods of use of this technique. Objectives To evaluate the clinical efficacy and cost-effectiveness of real-time and store-and-forward teledermatology.

A comparison of Agiolax and lactulose in elderly patients with chronic constipation

In a double-blind crossover study the efficacies of Agiolax, a combination of fibre and senna pod, and lactulose were compared in 77 long-stay elderly patients with chronic constipation. Mean daily bowel frequency, stool consistency and ease of evacuation were significantly greater with Agiolax than lactulose. The recommended dose was exceeded more frequently with lactulose than Agiolax (chi 2 = 8.38, p <0.01). Adverse effects were not different for the 2 treatments. In long-stay elderly patients with chronic constipation Agiolax and lactulose were well tolerated, but Agiolax proved a more effective treatment.

Assessment of bioavailable arsenic and copper in soils and sediments from the Antofagasta region of northern Chile

Copper levels of nearly 500 mg l(-1) were measured in aqueous extracts of soil and sediment samples from the lowlands of Antofagasta. Arsenic levels of up to 183 mg l(-1) were found in river sediments, and 27.5 mg l(-1) arsenic was found at the location of a dam where potable water is extracted. This indicates that the arsenic contamination of water supplies reported recently for the pre-Andes may be a widespread problem throughout the region. Copper contamination from smelting activities also provides cause for concern as elevated levels were found in aqueous extracts of soil up to 20 km away from a smelter. This study went beyond traditional chemical analysis by assessing the potential benefits of using microbial biosensors as an alternative to determination of chemical speciation, to provide an environmentally relevant interpretation of soil/sediment residue levels. This approach is simple to use and enables a rapid, low cost assessment of pollutant bioavailability. It may, therefore, be of use for further investigations in the region and beyond.

Age-related reference intervals for lymphocyte subsets in whole blood of healthy individuals

Enumeration of various lymphocyte subsets is used widely in the diagnosis and monitoring of various disease states. With the development of flow cytometric technology and whole blood analysis, methodologies have become more sensitive. It is therefore important to establish reference intervals in normal, healthy individuals using these techniques to give a better indication of the border between health and disease. Since some lymphocyte subpopulations are known to change with age, we have enumerated common subsets in healthy individuals from all decades of adult life, including nonagenarian subjects. We report reference intervals for these subsets in each age group, which will be of use in diagnosis and disease monitoring, particularly in elderly subjects, the most rapidly expanding group within the population today.

Anisotropy of single crystal 3C-SiC during nanometric cutting

3C–SiC (the only polytype of SiC that resides in a diamond cubic lattice structure) is a relatively new material that exhibits most of the desirable engineering properties required for advanced electronic applications. The anisotropy exhibited by 3C–SiC during its nanometric cutting is significant, and the potential for its exploitation has yet to be fully investigated. This paper aims to understand the influence of crystal anisotropy of 3C–SiC on its cutting behaviour. A molecular dynamics simulation model was developed to simulate the nanometric cutting of single-crystal 3C–SiC in nine (9) distinct combinations of crystal orientations and cutting directions, i.e. (1?1?1) <-1?1?0>, (1?1?1) <-2?1?1>, (1?1?0) <-1?1?0>, (1?1?0) <0?0?1>, (1?1?0) <1?1?-2>, (0?0?1) <-1?1?0>, (0?0?1) <1?0?0>, (1?1?-2) <1?-1?0> and (1?-2?0) <2?1?0>.

In order to ensure the reliability of the simulation results, two separate simulation trials were carried out with different machining parameters. In the first trial, a cutting tool rake angle of -25°, d/r (uncut chip thickness/cutting edge radius) ratio of 0.57 and cutting velocity of 10 m s-1 were used whereas a second trial was done using a cutting tool rake angle of -30°, d/r ratio of 1 and cutting velocity of 4 m s-1. Both the trials showed similar anisotropic variation.

The simulated orthogonal components of thrust force in 3C–SiC showed a variation of up to 45%, while the resultant cutting forces showed a variation of 37%. This suggests that 3C–SiC is highly anisotropic in its ease of deformation. These results corroborate with the experimentally observed anisotropic variation of 43.6% in Young's modulus of 3C–SiC. The recently developed dislocation extraction algorithm (DXA) [1, 2] was employed to detect the nucleation of dislocations in the MD simulations of varying cutting orientations and cutting directions. Based on the overall analysis, it was found that 3C–SiC offers ease of deformation on either (1?1?1) <-1?1?0>, (1?1?0) <0?0?1>, or (1?0?0) <1?0?0> setups.

The impact of union presence and strategic human resource management on employee voice in multinational enterprises in Australia

In this article, we examine the use and character of employee voice mechanisms of foreign-owned multinational enterprises operating in Australia, as well as the influence of a strategic human resource management approach and union presence. Findings indicate that foreign-owned multinational enterprises are high-level users of the full range of employee voice mechanisms, with the exceptions of use of employee suggestion schemes, trade union recognition and the use of joint consultation committees across all sites. Using logistic regression analysis, findings show that trade union presence, a strategic human resource management approach, greenfield site and country of origin impact the employee voice approach adopted. High trade union presence is associated with an indirect employee voice approach. A low trade union presence is associated with a direct or a minimalist approach to employee voice. Moreover, a strategic human resource management approach is associated with both direct and dualistic approaches to employee voice. Implications are drawn for theory and practice. © Australian Labour and Employment Relations Association (ALERA) SAGE Publications Ltd, Los Angeles, London, New Delhi, Singapore and Washington DC.

Determinants of WTP for Prosecco wine: A latent class regression with attitudinal responses

Purpose – Under investigation is Prosecco wine, a sparkling white wine from North-East Italy.
Information collection on consumer perceptions is particularly relevant when developing market
strategies for wine, especially so when local production and certification of origin play an important
role in the wine market of a given district, as in the case at hand. Investigating and characterizing the
structure of preference heterogeneity become crucial steps in every successful marketing strategy. The
purpose of this paper is to investigate the sources of systematic differences in consumer preferences.
Design/methodology/approach – The paper explores the effect of inclusion of answers to
attitudinal questions in a latent class regression model of stated willingness to pay (WTP) for this
specialty wine. These additional variables were included in the membership equations to investigate
whether they could be of help in the identification of latent classes. The individual specific WTPs from
the sampled respondents were then derived from the best fitting model and examined for consistency.
Findings – The use of answers to attitudinal question in the latent class regression model is found to
improve model fit, thereby helping in the identification of latent classes. The best performing model
obtained makes use of both attitudinal scores and socio-economic covariates identifying five latent
classes. A reasonable pattern of differences in WTP for Prosecco between CDO and TGI types were
derived from this model.
Originality/value – The approach appears informative and promising: attitudes emerge as
important ancillary indicators of taste differences for specialty wines. This might be of interest per se
and of practical use in market segmentation. If future research shows that these variables can be of use
in other contexts, it is quite possible that more attitudinal questions will be routinely incorporated in
structural latent class hedonic models.

Hip protectors to prevent hip fractures - a waste of time and money?

Abstract:
Background: An estimated 30-60% of older
adults fall every year and about 1% of falls result in a hip fracture. Hip fracture is a serious and growing problem, with a 3-10 fold rise in worldwide incidence predicted by 2050 (Gullberg, et al 1997). Hip protectors are underwear with built in protection for the greater trochanter. They are designed to prevent hip fractures by dispersing or absorbing the force of a fall. Trials
published to 2001 were broadly supportive of
the effectiveness of hip protectors, and this
was reflected in a Cochrane review in 2000.
However, earlier trials were methodologically
flawed and subsequent trials have not demonstrated effectiveness. The most recent Cochrane review describes only a marginal benefit (Parker et al, 2005).
Review and Discussion: This presentation
evaluates the current evidence for the use
of hip protectors and discusses the use of
that evidence by manufacturers, suppliers,
professional groups and guideline developers.
Interestingly, despite the limitations of the
evidence base, most advice has been broadly
supportive. Reasons for this are proposed
and discussed in the context of a critique of
evidence-based healthcare. protectors. However, the available evidence can be used in different ways and for different purposes by those with an interest in promoting
the use of hip protectors. A conservative
approach is warranted, where, if we cannot
demonstrate that hip protectors work, we
presume that they do not. This presentation will be of use to practitioners wanting to evaluate the evidence base for hip protectors (and other recommended interventions) on behalf of clients. It will also be of interest to policy makers who must assess the claims made for health care technologies as part of the decisionmaking process.
Recommended reading:
Gullberg B, Johnell O, Kanis JA (1997) Worldwide
projections for hip fracture. Osteoporos
Int. 7(5):407-13 .
Parker MJ, Gillespie WJ, Gillespie LD (2005) Hip
protectors for preventing hip fractures in older
people. The Cochrane Database of Systematic
Reviews Issue 3. Art. No.: CD001255.pub3. DOI:
10.1002/14651858.CD001255.pub3.

A cleavable network based on crosslinked star polymers containing acid-labile diacetal crosslinks: Synthesis, characterization and hydrolysis

A hydrolyzable model network comprising interconnected star polymers was prepared by the sequential group transfer polymerization of methyl methacrylate and the acid-labile diacetal-based dimethacrylate crosslinker bis[(2-methacryloyloxy)ethoxymethyl] ether. in contrast to other polymer networks previously synthesized by our group, all the branching points of this polymer network were found to hydrolyze under mildly acidic conditions, giving a linear copolymer with the theoretically expected molecular weight and composition. The ease of hydrolysis of this polymer network renders it a good candidate for use in the biomedical field. The characterization of the synthesized network, its linear and star polymer precursors and the hydrolysis products of the network and its precursors, by a variety of techniques, established the successful synthesis and hydrolysis of this well-defined polymer nanostructure.

Management of Bartholin's gland carcinoma using high-dose-rate interstitial brachytherapy boost

To describe the patterns of use, clinical outcomes, and dose-volume histogram parameters of high-dose-rate interstitial brachytherapy (HDR-ISBT) in the management of Bartholin's gland cancer.

Rigorous Specification and Low-Latency Implementation of Technical Market Indicators

Technical market indicators are tools used by technical an- alysts to understand trends in trading markets. Technical (market) indicators are often calculated in real-time, as trading progresses. This paper presents a mathematically- founded framework for calculating technical indicators. Our framework consists of a domain specific language for the un- ambiguous specification of technical indicators, and a run- time system based on Click, for computing the indicators. We argue that our solution enhances the ease of program- ming due to aligning our domain-specific language to the mathematical description of technical indicators, and that it enables executing programs in kernel space for decreased latency, without exposing the system to users’ programming errors.