'Changing attitudes with a little imagination': Imagined contact effects on young children's intergroup bias

The current research tested a recent development in social psychology, namely 'imagined contact', among young children (n = 123, 5 to 10 years). Children imagined interacting with a physically disabled child, or did not take part in this activity (the control group). Compared with the control group, children who engaged in 'imagined contact' subsequently showed reduced intergroup bias in their general attitude and ratings of warmth and competence. Imagined contact also led to more positive intended friendship behavior towards the disabled, but only among 5 – 6 year olds. This provides partial support for our hypothesis that younger children, perhaps as a result of their lack of outgroup experience, are more likely to benefit from imagined contact. Implications for the development of attitudes towards the disabled, imagined contact theory and the development of classroom-based prejudice-reduction techniques based on imagined contact are discussed.

Microstructural analysis of non-woven fabrics using scanning electron microscopy and image processing. Part 1:Development and verification of the methods

This paper reports image analysis methods that have been developed to study the microstructural changes of non-wovens made by the hydroentanglement process. The validity of the image processing techniques has been ascertained by applying them to test images with known properties. The parameters in preprocessing of the scanning electron microscope (SEM) images used in image processing have been tested and optimized. The fibre orientation distribution is estimated using fast Fourier transform (FFT) and Hough transform (HT) methods. The results obtained using these two methods are in good agreement. The HT method is more demanding in computational time compared with the Fourier transform (FT) method. However, the advantage of the HT method is that the actual orientation of the lines can be concluded directly from the result of the transform without the need for any further computation. The distribution of the length of the straight fibre segments of the fabrics is evaluated by the HT method. The effect of curl of the fibres on the result of this evaluation is shown.

Effect of magnetic bias on Gaussian pulse scattering by stacked nonlinear semiconductor layers

The nonlinear scattering of pulses by periodic stacks of semiconductor layers with magnetic bias has been studied in the self-consistent problem formulation, taking into account mobility of carriers. The three-wave mixing technique has been applied to the analysis of the waveform evolution in the stacks illuminated by two Gaussian pulses with different central frequencies and lengths. The effects of external magnetic bias, and stack physical and geometrical parameters on the properties of the scattered waveforms are discussed. © 2013 IEEE.

Verification of a novel material model to predict damage in composite structures

An intralaminar damage model (IDM), based on continuum damage mechanics, was developed for the simulation of composite structures subjected to damaging loads. This model can capture the complex intralaminar damage mechanisms, accounting for mode interactions, and delaminations. Its development is driven by a requirement for reliable crush simulations to design composite structures with a high specific energy absorption. This IDM was implemented as a user subroutine within the commercial finite element package, Abaqus/Explicit[1]. In this paper, the validation of the IDM is presented using two test cases. Firstly, the IDM is benchmarked against published data for a blunt notched specimen under uniaxial tensile loading, comparing the failure strength as well as showing the damage. Secondly, the crush response of a set of tulip-triggered composite cylinders was obtained experimentally. The crush loading and the associated energy of the specimen is compared with the FE model prediction. These test cases show that the developed IDM is able to capture the structural response with satisfactory accuracy

Sequential injection of domain walls into ferroelectrics at different bias voltages: Paving the way for “domain wall memristors”

Simple meso-scale capacitor structures have been made by incorporating thin (300 nm) single crystal lamellae of KTiOPO4 (KTP) between two coplanar Pt electrodes. The influence that either patterned protrusions in the electrodes or focused ion beam milled holes in the KTP have on the nucleation of reverse domains during switching was mapped using piezoresponse force microscopy imaging. The objective was to assess whether or not variations in the magnitude of field enhancement at localised “hot-spots,” caused by such patterning, could be used to both control the exact locations and bias voltages at which nucleation events occurred. It was found that both the patterning of electrodes and the milling of various hole geometries into the KTP could allow controlled sequential injection of domain wall pairs at different bias voltages; this capability could have implications for the design and operation of domain wall electronic devices, such as memristors, in the future.

Bias in research

The aim of this article is to outline types of ‘bias’ across research designs, and consider strategies to minimise bias. Evidence-based nursing, defined as the “process by which evidence, nursing theory, and clinical expertise are critically evaluated and considered, in conjunction with patient involvement, to provide the delivery of optimum nursing care,”1 is central to the continued development of the nursing professional. Implementing evidence into practice requires nurses to critically evaluate research, in particular assessing the rigour in which methods were undertaken and factors that may have biased findings.

An EPID-based method for comprehensive verification of gantry, EPID and the MLC carriage positional accuracy in Varian linacs during arc treatments

Background

]In modern radiotherapy, it is crucial to monitor the performance of all linac components including gantry, collimation system and electronic portal imaging device (EPID) during arc deliveries. In this study, a simple EPID-based measurement method has been introduced in conjunction with an algorithm to investigate the stability of these systems during arc treatments with the aim of ensuring the accuracy of linac mechanical performance.

The Varian EPID sag, gantry sag, changes in source-to-detector distance (SDD), EPID and collimator skewness, EPID tilt, and the sag in MLC carriages as a result of linac rotation were separately investigated by acquisition of EPID images of a simple phantom comprised of 5 ball-bearings during arc delivery. A fast and robust software package was developed for automated analysis of image data. Twelve Varian linacs of different models were investigated.

The average EPID sag was within 1 mm for all tested linacs. All machines showed less than 1 mm gantry sag. Changes in SDD values were within 1.7 mm except for three linacs of one centre which were within 9 mm. Values of EPID skewness and tilt were negligible in all tested linacs. The maximum sag in MLC leaf bank assemblies was around 1 mm. The EPID sag showed a considerable improvement in TrueBeam linacs.

The methodology and software developed in this study provide a simple tool for effective investigation of the behaviour of linac components with gantry rotation. It is reproducible and accurate and can be easily performed as a routine test in clinics.

Attentional bias to food-related visual cues: is there a role in obesity?

The incentive sensitisation model of obesity suggests that modification of the dopaminergic associated reward systems in the brain may result in increased awareness of food-related visual cues present in the current food environment. Having a heightened awareness of these visual food cues may impact on food choices and eating behaviours with those being most aware of or demonstrating greater attention to food-related stimuli potentially being at greater risk of overeating and subsequent weight gain. To date, research related to attentional responses to visual food cues has been both limited and conflicting. Such inconsistent findings may in part be explained by the use of different methodological approaches to measure attentional bias and the impact of other factors such as hunger levels, energy density of visual food cues and individual eating style traits that may influence visual attention to food-related cues outside of weight status alone. This review examines the various methodologies employed to measure attentional bias with a particular focus on the role that attentional processing of food-related visual cues may have in obesity. Based on the findings of this review, it appears that it may be too early to clarify the role visual attention to food-related cues may have in obesity. Results however highlight the importance of considering the most appropriate methodology to use when measuring attentional bias and the characteristics of the study populations targeted while interpreting results to date and in designing future studies.

In and out of home care decisions: The influence of confirmation bias in developing decision supportive reasoning

The aims of this study were to identify the themes Social Workers regard as important in supporting decisions to remove children from, or return them to, the care of their parents. To further elicit underlying hypotheses that are discernible in interpretation of evidence. A case study, comprising a two-part vignette with a questionnaire, recorded demographic information, child welfare attitudes and risk assessments, using scales derived from standardised instruments, was completed by 202 Social Workers in Northern Ireland. There were two manipulated variables, mother’s attitude to removal and child’s attitude to reunification2 years later. In this paper we use data derived from respondents’ qualitative comments explaining their reasoning for in and out of home care decisions. Some 60.9% of respondent’s chose the parental care option at part one, with 94% choosing to have the child remain in foster care at part two. The manipulated variables were found to have no significant statistical effect. However, three underlying hypotheses were found to underpin decisions; (a)child rescue, (b) kinship defence and (c) a hedged position on calculation of risk subject to further assessment. Reasoning strategies utilised by social workers to support their decision making suggest that they tend to selectively interpret information either positively or negatively to support pre-existing underlying hypotheses. This finding is in keeping with the literature on ‘confirmation bias.’ The research further draws attention to the need to incorporate open questions in quantitative studies, to help guard against surface reading of data, which often does not ‘speak for itself.’

The Equiprobability Bias from a Mathematical and Psychological Perspective

The equiprobability bias (EB) is a tendency to believe that every process in which randomness is involved corresponds to a fair distribution, with equal probabilities for any possible outcome. The EB is known to affect both children and adults, and to increase with probability education. Because it results in probability errors resistant to pedagogical interventions, it has been described as a deep misconception about randomness: the erroneous belief that randomness implies uniformity. In the present paper, we show that the EB is actually not the result of a conceptual error about the definition of randomness. On the contrary, the mathematical theory of randomness does imply uniformity. However, the EB is still a bias, because people tend to assume uniformity even in the case of events that are not random. The pervasiveness of the EB reveals a paradox: The combination of random processes is not necessarily random. The link between the EB and this paradox is discussed, and suggestions are made regarding educational design to overcome difficulties encountered by students as a consequence of the EB.

Outperformance in exchange-traded fund pricing deviations: Generalized control of data snooping bias

An investigation into exchange-traded fund (ETF) outperforrnance during the period 2008-2012 is undertaken utilizing a data set of 288 U.S. traded securities. ETFs are tested for net asset value (NAV) premium, underlying index and market benchmark outperformance, with Sharpe, Treynor, and Sortino ratios employed as risk-adjusted performance measures. A key contribution is the application of an innovative generalized stepdown procedure in controlling for data snooping bias. We find that a large proportion of optimized replication and debt asset class ETFs display risk-adjusted premiums with energy and precious metals focused funds outperforming the S&P 500 market benchmark.