Influence of unit operations on the levels of polyacetylenes in minimally processed carrots and parsnips: An industrial trial

Carrots and parsnips are often consumed as minimally processed ready-to-eat convenient foods and contain in minor quantities, bioactive aliphatic C17-polyacetylenes (falcarinol, falcarindiol, falcarindiol-3-acetate). Their retention during minimal processing in an industrial trial was evaluated. Carrot and parsnips were prepared in four different forms (disc cutting, baton cutting, cubing and shredding) and samples were taken in every point of their processing line. The unit operations were: peeling, cutting and washing with chlorinated water and also retention during 7 days storage was evaluated. The results showed that the initial unit operations (mainly peeling) influence the polyacetylene retention. This was attributed to the high polyacetylene content of their peels. In most cases, when washing was performed after cutting, less retention was observed possibly due to leakage during tissue damage occurred in the cutting step. The relatively high retention during storage indicates high plant matrix stability. Comparing the behaviour of polyacetylenes in the two vegetables during storage, the results showed that they were slightly more retained in parsnips than in carrots. Unit operations and especially abrasive peeling might need further optimisation to make them gentler and minimise bioactive losses.

Burnout as a predictor of all-cause mortality among industrial employees: A 10-year prospective register-linkage study

Objective: Burnout, a psychological consequence of prolonged work stress, has been shown to coexist with physical and mental disorders. The aim of this study was to investigate whether burnout is related to all-cause mortality among employees. Methods: In 1996, of 15,466 Finnish forest industry employees, 9705 participated in the 'Still Working' study and 8371 were subsequently identified from the National Population Register. Those who had been treated in a hospital for the most common causes of death prior to the assessment of burnout were excluded on the basis of the Hospital Discharge Register, resulting in a final study population of 7396 people. Burnout was measured using the Maslach Burnout Inventory-General Survey. Dates of death from 1996 to 2006 were extracted from the National Mortality Register. Mortality was predicted with Cox hazard regression models, controlling for baseline sociodemographic factors and register-based health status according to entitled medical reimbursement and prescribed medication for mental health problems, cardiac risk factors, and pain problems. Results: During the 10-year 10-month follow-up, a total of 199 employees had died. The risk of mortality per one-unit increase in burnout was 35% higher (95% CI 1.07-1.71) for total score and 26% higher (0.99-1.60) for exhaustion, 29% higher for cynicism (1.03-1.62), and 22% higher for diminished professional efficacy (0.96-1.55) in participants who had been under 45 at baseline. After adjustments, only the associations regarding burnout and exhaustion were statistically significant. Burnout was not related to mortality among the older employees. Conclusion: Burnout, especially work-related exhaustion, may be a risk for overall survival. (C) 2010 Elsevier Inc. All rights reserved.

Lack of Predictability at Work and Risk of Acute Myocardial Infarction: An 18-Year Prospective Study of Industrial Employees

Objectives. We examined whether the distinctive components of job control-decision authority, skill discretion, and predictability-were related to subsequent acute myocardial infarction (MI) events in a large population of initially heart disease-free industrial employees.

Thin catalytic coatings on microreactor walls A way to make industrial processes more efficient

Current trends in the development of microstructured reactors with thin catalytic films (from 100 nm up to several microns) that have self-assembled nanostructures are discussed. A major technique that is used to prepare such films is sol-gel processing. This involves depositing a complex fluid on a microstructured substrate by dip, spin, or spray coating, followed by surfactant removal to form the porous nanostructures. A novel methodology has been developed by which a uniform coating containing controlled amounts of (poly) metallic nanoparticles can be obtained. This elegant strategy is based on the condensation of metal oxide species by self-assembly in the presence of metallic colloids. The potential microreactor applications brought forth by this innovative protocol are placed in perspective in the light of its versatility.

Chlorobenzenes in rivers draining industrial catchments

Eleven chlorobenzenes (out of a total of 12 in the congener series) were monitored weekly on four industrialized rivers (Aire, Calder, Don and Trent) of the Southern Humber Catchment in whole water samples. 1,2- and 1,4-dichlorobenzene were present at relatively high levels on both the Aire and Calder, having mean concentrations of approximately 30 ng/l. They were both at lower concentrations on the Don and Trent, although the 1,4-isomer dominated. All other chlorobenzenes monitored were routinely found on all the rivers, with the exception of hexachlorobenzene, which was only regularly detected on the Trent. Again, the rivers fell into two classes with respect to their total chlorobenzene concentrations, with the Aire and Calder being more polluted. The higher levels of chlorobenzenes (excluding hexachlorobenzene which was used widely as a agricultural pesticide) on the Aire and Calder, and the dominance of the 1,4-dichlorobenzene congener (accounting for 60-70% of sigma chlorobenzenes) on the Don and Trent, indicated that the Aire and Calder were predominately contaminated with chlorobenzenes through industrial sources, while the Don and Trent were mainly contaminated through domestic sources (1,4-dichlorobenzene is widely used as a toilet deodorant). 1,4-Dichlorobenzene dominated flux, with the Aire, Don and Trent exporting 52.5 kg/year into the Humber estuary, followed by the 1,2-dichlorobenzene at 38.8 kg/year. Sigma chlorobenzenes exported to the Humber was 133 kg/year. This is the first study to calculate chlorobenzene fluxes to the North Sea from a UK catchment.

Inscribing value on business model innovations: Insights from industrial projects commercializing disruptive digital innovations

In this paper we seek to show how marketing activities inscribe value on business model innovation, representative of an act, or sequence of socially interconnecting acts. Theoretically we ask two interlinked questions: (1) how can value inscriptions contribute to business model innovations? (2) how can marketing activities support the inscription of value on business model innovations? Semi-structured in-depth interviews were conducted with the thirty-seven members from across four industrial projects commercializing disruptive digital innovations. Various individuals from a diverse range of firms are shown to cast relevant components of their agency and knowledge on business model innovations through negotiation as an ongoing social process. Value inscription is mutually constituted from the marketing activities, interactions and negotiations of multiple project members across firms and functions to counter destabilizing forces and tensions arising from the commercialization of disruptive digital innovations. This contributes to recent conceptual thinking in the industrial marketing literature, which views business models as situated within dynamic business networks and a context-led evolutionary process. A contribution is also made to debate in the marketing literature around marketing's boundary-spanning role, with marketing activities shown to span and navigate across functions and firms in supporting value inscriptions on business model innovations.