Multiuser Scheduling for Cognitive MIMO with Channel Estimation Errors and Feedback Delay

A multiuser scheduling multiple-input multiple-output (MIMO) cognitive radio network (CRN) with space-time block coding (STBC) is considered in this paper, where one secondary base station (BS) communicates with one secondary user (SU) selected from K candidates. The joint impact of imperfect channel state information (CSI) in BS → SUs and BS → PU due to channel estimation errors and feedback delay on the outage performance is firstly investigated. We obtain the exact outage probability expressions for the considered network under the peak interference power IP at PU and maximum transmit power Pm at BS which cover perfect/imperfect CSI scenarios in BS → SUs and BS → PU. In addition, asymptotic expressions of outage probability in high SNR region are also derived from which we obtain several important insights into the system design. For example, only with perfect CSIs in BS → SUs, i.e., without channel estimation errors and feedback delay, the multiuser diversity can be exploited. Finally, simulation results confirm the correctness of our analysis.

Synthesis by extrusion: continuous, large-scale preparation of MOFs using little or no solvent

Grinding solid reagents under solvent-free or low-solvent conditions (mechanochemistry) is emerging as a general synthetic technique which is an alternative to conventional solvent-intensive methods. However, it is essential to find ways to scale-up this type of synthesis if its promise of cleaner manufacturing is to be realised. Here, we demonstrate the use of twin screw and single screw extruders for the continuous synthesis of various metal complexes, including Ni(salen), Ni(NCS)(2)(PPh3)(2) as well as the commercially important metal organic frameworks (MOFs) Cu-3(BTC)(2) (HKUST-1), Zn(2-methylimidazolate)(2) (ZIF-8, MAF-4) and Al(fumarate)(OH). Notably, Al(fumarate)(OH) has not previously been synthesised mechanochemically. Quantitative conversions occur to give products at kg h(-1) rates which, after activation, exhibit surface areas and pore volumes equivalent to those of materials produced by conventional solvent-based methods. Some reactions can be performed either under completely solvent-free conditions whereas others require the addition of small amounts of solvent (typically 3-4 mol equivalents). Continuous neat melt phase synthesis is also successfully demonstrated by both twin screw and single screw extrusion for ZIF-8. The latter technique provided ZIF-8 at 4 kg h(-1). The space time yields (STYs) for these methods of up to 144 x 10(3) kg per m(3) per day are orders of magnitude greater than STYs for other methods of making MOFs. Extrusion methods clearly enable scaling of mechanochemical and melt phase synthesis under solvent-free or low-solvent conditions, and may also be applied in synthesis more generally.

Exploiting Human Resource Requirements to Infer Human Movement Patterns for Use in Modelling Disease Transmission Systems: An Example from Eastern Province, Zambia

In this research, an agent-based model (ABM) was developed to generate human movement routes between homes and water resources in a rural setting, given commonly available geospatial datasets on population distribution, land cover and landscape resources. ABMs are an object-oriented computational approach to modelling a system, focusing on the interactions of autonomous agents, and aiming to assess the impact of these agents and their interactions on the system as a whole. An A* pathfinding algorithm was implemented to produce walking routes, given data on the terrain in the area. A* is an extension of Dijkstra's algorithm with an enhanced time performance through the use of heuristics. In this example, it was possible to impute daily activity movement patterns to the water resource for all villages in a 75 km long study transect across the Luangwa Valley, Zambia, and the simulated human movements were statistically similar to empirical observations on travel times to the water resource (Chi-squared, 95% confidence interval). This indicates that it is possible to produce realistic data regarding human movements without costly measurement as is commonly achieved, for example, through GPS, or retrospective or real-time diaries. The approach is transferable between different geographical locations, and the product can be useful in providing an insight into human movement patterns, and therefore has use in many human exposure-related applications, specifically epidemiological research in rural areas, where spatial heterogeneity in the disease landscape, and space-time proximity of individuals, can play a crucial role in disease spread.

Lost in Transition? Emerging forms of residential architecture in Kathmandu

Kathmandu has been the last few cities in the world which retained its medieval urban culture up until twentieth century. Various Hindu and Buddhist religious practices shaped the arrangement of houses, roads and urban spaces giving the city a distinctive physical form, character and a unique oriental nativeness. In recent decades, the urban culture of the city has been changing with the forces of urbanisation and globalisation and the demand for new buildings and spaces. New residential design is increasingly dominated by distinctive patterns of Western suburban ideal comprising detached or semi-detached homes and high rise tower blocks. This architectural iconoclasm can be construed as a rather crude response to the indigenous spaces and builtform. The paper attempts to dismantle the current tension between traditional and contemporary 'culture' (and hence society) and housing (or builtform) in Kathmandu by engaging in a discussion that cuts across space, time and meaning of building. The paper concludes that residential architecture in Kathmandu today stands disoriented and lost in the transition.

Unsettling modernity: Shifting values and changing housing styles in the Kathmandu Valley

Abstract

Culture has always been important for the character of the cities, as have the civic and public institutions that sustain a lifestyle and provide an identity. Substantial evidence of the unique historical, urban civilisation remains within the traditional settlements in the Kathmandu Valley in Nepal; manifested in houses, palaces, temples, rest houses, open spaces, festivals, rituals, customs and cultural institutions. Indigenous knowledge and practices prescribed the arrangement of houses, roads and urban spaces giving the city a distinctive physical form, character and a unique oriental nativeness. In technical sense, these societies did not have written rules for guiding development. In recent decades, the urban culture of the city has been changing with the forces of urbanisation and globalisation and the demand for new buildings and spaces. New residential design is increasingly dominated by distinctive patterns of Western suburban ideal comprising detached or semi-detached homes and high rise tower blocks. This architectural iconoclasm can be construed as a rather crude response to the indigenous culture and built form. The paper attempts to dismantle the current tension between traditional and contemporary ‘culture’ (and hence society) and housing (or built form) in the Kathmandu Valley by engaging in a discussion that cuts across space, time and meaning of architecture as we know it.

Tracking biological invasions in space and time: elucidating the invasive history of the green alga Codium fragile using old DNA

With the advent of 'ancient DNA' studies on preserved material of extant and extinct species, museums and herbaria now represent an important although still underutilized resource in molecular ecology. The ability to obtain sequence data from archived specimens can reveal the recent history of cryptic species and introductions. We have analysed extant and herbarium samples of the highly invasive green alga Codium fragile, many over 100 years old, to identify cryptic accessions of the invasive strain known as C. fragile ssp. tomentosoides, which can be identified by a unique haplotype. Molecular characterization of specimens previously identified as native in various regions shows that the invasive tomentosoides strain has been colonizing new habitats across the world for longer than records indicate, in some cases nearly 100 years before it was noticed. It can now be found in the ranges of all the other native haplotypes detected, several of which correspond to recognized subspecies. Within regions in the southern hemisphere there was a greater diversity of haplotypes than in the northern hemisphere, probably as a result of dispersal by the Antarctic Circumpolar Current. The findings of this study highlight the importance of herbaria in preserving contemporaneous records of invasions as they occur, especially when invasive taxa are cryptic.

Space and time resolved rotational state populations and gas temperatures in an inductively coupled hydrogen RF discharge

Gas temperature is of major importance in plasma based surface treatment, since the surface processes are strongly temperature sensitive. The spatial distribution of reactive species responsible for surface modification is also influenced by the gas temperature. Industrial applications of RF plasma reactors require a high degree of homogeneity of the plasma in contact with the substrate. Reliable measurements of spatially resolved gas temperatures are, therefore, of great importance. The gas temperature can be obtained, e.g. by optical emission spectroscopy (OES). Common methods of OES to obtain gas temperatures from analysis of rotational distributions in excited states do not include the population dynamics influenced by cascading processes from higher electronic states. A model was developed to evaluate this effect on the apparent rotational temperature that is observed. Phase resolved OES confirmed the validity of this model. It was found that cascading leads to higher apparent temperatures, but the deviation (similar or equal to 25 K) is relatively small and can be ignored in most cases. This analysis is applied to investigate axially and radially resolved temperature profiles in an inductively coupled hydrogen RF discharge.

DISPERSION IN THE WOOD MOUSE, APODEMUS-SYLVATICUS - VARIABLE RESOURCES IN TIME AND SPACE

(1) The abundance and dispersion of a population of Apodemus sylvaticus was investigated with respect to tree seed availability and vegetative structure over three harvests.

Drivers of inequality in disability-free expectancy at birth and age 85 across space and time in Great Britain

Background: Although mortality and health inequalities at birth have increased both geographically and in socioeconomic terms, little is known about inequalities at age 85, the fastest growing sector of the population in Great Britain (GB).

Aim: To determine whether trends and drivers of inequalities in life expectancy (LE) and disability-free life expectancy (DFLE) at age 85 between 1991 and 2001 are the same as those at birth.

Methods: DFLE at birth and age 85 for 1991 and 2001 by gender were calculated for each local authority in GB using the Sullivan method. Regression modelling was used to identify area characteristics (rurality, deprivation, social class composition, ethnicity, unemployment, retirement migration) that could explain inequalities in LE and DFLE.

Results: Similar to values at birth, LE and DFLE at age 85 both increased between 1991 and 2001 (though DFLE increased less than LE) and gaps across local areas widened (and more for DFLE than LE). The significantly greater increases in LE and DFLE at birth for less-deprived compared with more-deprived areas were still partly present at age 85. Considering all factors, inequalities in DFLE at birth were largely driven by social class composition and unemployment rate, but these associations appear to be less influential at age 85.

Conclusions: Inequalities between areas in LE and DFLE at birth and age 85 have increased over time though factors explaining inequalities at birth (mainly social class and unemployment rates) appear less important for inequalities at age 85.