Nonadherence in difficult asthma - facts, myths, and a time to act

Nonadherence to prescribed treatment is an important cause of difficult asthma. Rates of nonadherence amongst asthmatic patients have been shown to range between 30% and 70%. This is associated with poor health care outcomes and increased health care costs. There is no such thing as a "typical" nonadherent patient. The reasons driving nonadherence are multifactorial. Furthermore, adherence is a variable behavior and not a trait characteristic. Adherence rates can vary between the same individual across treatments for different conditions. There is no consistent link between socioeconomic status and nonadherence, and although some studies have shown that nonadherence is more common amongst females, this is not a universal finding. The commonly held perception that better adherence is driven by greater disease severity has been demonstrated to not be the case, in both pediatric and adult patients. Identification of nonadherence is the first step. If adherence is not checked, it is likely that poor adherence will be labeled as refractory disease. Failure to identify poor adherence may lead to inappropriate escalation of therapy, including the potential introduction of complex biological therapies. Surrogate measures, such as prescription counting, are not infallible. Nonadherence can be difficult to identify in clinical practice, and a systematic approach using a variety of tools is required. Nonadherence can be successfully addressed. Therefore, assessment of adherence is of paramount importance in difficult asthma management, in order to reduce exacerbations and steroid-related side effects as well as hospital and intensive care admissions, health care cost, and inappropriate treatment escalation. In this paper, we present an overview of the literature surrounding nonadherence in difficult asthma. We explore the facts and myths surrounding the factors driving nonadherence as well as how it can be identified and addressed.

Enhancing non-classicality in mechanical systems

We study the effects of post-selection measurements on both the non-classicality of the state of a mechanical oscillator and the entanglement between two mechanical systems that are part of a distributed optomechanical network. We address the cases of both Gaussian and non-Gaussian measurements, identifying in which cases simple photon counting and Geiger-like measurements are effective in distilling a strongly non-classical mechanical state and enhancing the purely mechanical entanglement between two elements of the network.

Women Speaking of National Security: The Case of Checkpoint Watch

The production of reports and the distribution of information have become integral to the operation of many non-governmental organizations. In this regard, the fact that the all-women organization of Checkpoint Watch publishes reports about the Israeli checkpoints in the occupied West Bank seems to comply with current trends. However, the reports—most of which are short repetitive descriptions of the banality and everydayness of the military checkpoints, counting the number of people and cars waiting, commenting on the manner in which the checks are performed and meticulously documenting what mostly amounts to minor incidents of humiliation and distress—do not seem to abide by any convention of reporting. This work analyzes the reporting praxis of the organization and claims that it should be understood as a form of activism in and of itself. Tracking the ways in which the reports address the Israeli public through the concept of parrhesia, the work suggests that this form of reporting enables the women activists to use their gendered marginality to make their way into the highly masculinized and militarized Israeli security discourse.

Effect of laser treatment on the attachment and viability of mesenchymal stem cell responses on shape memory NiTi alloy

The objectives of this study were to investigate the effect of laser-induced surface features on the morphology, attachment and viability of mesenchymal stem cells (MSCs) at different periods of time, and to evaluate the biocompatibility of different zones: laser-melted zone (MZ), heat-affected zone (HAZ) and base metal (BM) in laser-treated NiTi alloy. The surface morphology and composition were studied by scanning electron microscope (SEM) and X-ray photoemission spectroscopy (XPS), respectively. The cell morphology was examined by SEM while the cell counting and viability measurements were done by haemocytometer and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) colorimetric assay. The results indicated that the laser-induced surface features, such as surface roughening, presence of anisotropic dendritic pattern and complete surface Ni oxidation were beneficial to improve the biocompatibility of NiTi as evidenced by the highest cell attachment (4 days of culture) and viability (7 days of culture) found in the MZ. The biocompatibility of the MZ was the best, followed by the BM with the HAZ being the worst. The defective and porous oxide layer as well as the coarse grained structure might attribute to the inferior cell attachment (4 days of culture) and viability (7 days of culture) on the HAZ compared with the BM which has similar surface morphology.

Towards optimal clinical and epidemiological registration of haematological malignancies: Guidelines for recording progressions, transformations and multiple diagnoses

Haematological malignancies (HM) represent over 6% of the total cancer incidence in Europe and affect all ages, ranging between 45% of all cancers in children and 7% in the elderly. Thirty per cent of childhood cancer deaths are due to HM, 8% in the elderly. Their registration presents specific challenges, mainly because HM may transform or progress in the course of the disease into other types of HM. In the context of cancer registration decisions have to be made about classifying subsequent notifications on the same patient as the same tumour (progression), a transformation or a new tumour registration. Allocation of incidence date and method of diagnosis must also be standardised. We developed European Network of Cancer Registries (ENCR) recommendations providing specific advice for cancer registries to use haematology and molecular laboratories as data sources, conserve the original date of incidence in case of change of diagnosis, make provision for recording both the original as well as transformed tumour and to apply precise rules for recording and counting multiple diagnoses. A reference table advising on codes which reflect a potential transformation or a new tumour is included. This work will help to improve comparability of data produced by population-based cancer registries, which are indispensable for aetiological research, health care planning and clinical research, an increasing important area with the application of targeted therapies.

Principles and methods for automated palynology

Pollen grains are microscopic so their identification and quantification has, for decades, depended upon human observers using light microscopes: a labour-intensive approach. Modern improvements in computing and imaging hardware and software now bring automation of pollen analyses within reach. In this paper, we provide the first review in over 15 yr of progress towards automation of the part of palynology concerned with counting and classifying pollen, bringing together literature published from a wide spectrum of sources. We
consider which attempts offer the most potential for an automated palynology system for universal application across all fields of research concerned with pollen classification and counting. We discuss what is required to make the datasets of these automated systems as acceptable as those produced by human palynologists, and present suggestions for how automation will generate novel approaches to counting and classifying pollen that have hitherto been unthinkable.

Nanoflare Activity In the Solar Chromosphere

We use ground-based images of high spatial and temporal resolution to search for evidence of nanoflare activity in the solar chromosphere. Through close examination of more than 1 x 10(9) pixels in the immediate vicinity of an active region, we show that the distributions of observed intensity fluctuations have subtle asymmetries. A negative excess in the intensity fluctuations indicates that more pixels have fainter-than-average intensities compared with those that appear brighter than average. By employing Monte Carlo simulations, we reveal how the negative excess can be explained by a series of impulsive events, coupled with exponential decays, that are fractionally below the current resolving limits of low-noise equipment on high-resolution ground-based observatories. Importantly, our Monte Carlo simulations provide clear evidence that the intensity asymmetries cannot be explained by photon-counting statistics alone. A comparison to the coronal work of Terzo et al. suggests that nanoflare activity in the chromosphere is more readily occurring, with an impulsive event occurring every similar to 360 s in a 10,000 km(2) area of the chromosphere, some 50 times more events than a comparably sized region of the corona. As a result, nanoflare activity in the chromosphere is likely to play an important role in providing heat energy to this layer of the solar atmosphere.

Tools for Assessing Outcomes in Studies of Chronic Cough: CHEST Guideline and Expert Panel Report

BACKGROUND: Since the publication of the 2006 American College of Chest Physicians (CHEST) cough guidelines, a variety of tools has been developed or further refined for assessing cough. The purpose of the present committee was to evaluate instruments used by investigators performing clinical research on chronic cough. The specific aims were to (1) assess the performance of tools designed to measure cough frequency, severity, and impact in adults, adolescents, and children with chronic cough and (2) make recommendations or suggestions related to these findings.

METHODS: By following the CHEST methodologic guidelines, the CHEST Expert Cough Panel based its recommendations and suggestions on a recently published comparative effectiveness review commissioned by the US Agency for Healthcare Research and Quality, a corresponding summary published in CHEST, and an updated systematic review through November 2013. Recommendations or suggestions based on these data were discussed, graded, and voted on during a meeting of the Expert Cough Panel.

RESULTS: We recommend for adults, adolescents (≥ 14 years of age), and children complaining of chronic cough that validated and reliable health-related quality-of-life (QoL) questionnaires be used as the measurement of choice to assess the impact of cough, such as the Leicester Cough Questionnaire and the Cough-Specific Quality-of-Life Questionnaire in adult and adolescent patients and the Parent Cough-Specific Quality of Life Questionnaire in children. We recommend acoustic cough counting to assess cough frequency but not cough severity. Limited data exist regarding the performance of visual analog scales, numeric rating scales, and tussigenic challenges.

CONCLUSIONS: Validated and reliable cough-specific health-related QoL questionnaires are recommended as the measurement of choice to assess the impact of cough on patients. How they compare is yet to be determined. When used, the reporting of cough severity by visual analog or numeric rating scales should be standardized. Previously validated QoL questionnaires or other cough assessments should not be modified unless the new version has been shown to be reliable and valid. Finally, in research settings, tussigenic challenges play a role in understanding mechanisms of cough.

An integrated approach for real-time model-based state-of-charge estimation of lithium-ion batteries

Lithium-ion batteries have been widely adopted in electric vehicles (EVs), and accurate state of charge (SOC) estimation is of paramount importance for the EV battery management system. Though a number of methods have been proposed, the SOC estimation for Lithium-ion batteries, such as LiFePo4 battery, however, faces two key challenges: the flat open circuit voltage (OCV) vs SOC relationship for some SOC ranges and the hysteresis effect. To address these problems, an integrated approach for real-time model-based SOC estimation of Lithium-ion batteries is proposed in this paper. Firstly, an auto-regression model is adopted to reproduce the battery terminal behaviour, combined with a non-linear complementary model to capture the hysteresis effect. The model parameters, including linear parameters and non-linear parameters, are optimized off-line using a hybrid optimization method that combines a meta-heuristic method (i.e., the teaching learning based optimization method) and the least square method. Secondly, using the trained model, two real-time model-based SOC estimation methods are presented, one based on the real-time battery OCV regression model achieved through weighted recursive least square method, and the other based on the state estimation using the extended Kalman filter method (EKF). To tackle the problem caused by the flat OCV-vs-SOC segments when the OCV-based SOC estimation method is adopted, a method combining the coulombic counting and the OCV-based method is proposed. Finally, modelling results and SOC estimation results are presented and analysed using the data collected from LiFePo4 battery cell. The results confirmed the effectiveness of the proposed approach, in particular the joint-EKF method.

Thermodynamics of trajectories and local fluctuation theorems for harmonic quantum networks

We present a general method to undertake a thorough analysis of the thermodynamics of the quantum jump trajectories followed by an arbitrary quantum harmonic network undergoing linear and bilinear dynamics. The approach is based on the phase-space representation of the state of a harmonic network. The large deviation function associated with this system encodes the full counting statistics of exchange and also allows one to deduce for fluctuation theorems obeyed by the dynamics. We illustrate the method showing the validity of a local fluctuation theorem about the exchange of excitations between a restricted part of the environment (i.e., a local bath) and a harmonic network coupled with different schemes.

Fast Rule Mining over Multi-dimensional Windows

Association rule mining is an indispensable tool for discovering
insights from large databases and data warehouses.
The data in a warehouse being multi-dimensional, it is often
useful to mine rules over subsets of data defined by selections
over the dimensions. Such interactive rule mining
over multi-dimensional query windows is difficult since rule
mining is computationally expensive. Current methods using
pre-computation of frequent itemsets require counting
of some itemsets by revisiting the transaction database at
query time, which is very expensive. We develop a method
(RMW) that identifies the minimal set of itemsets to compute
and store for each cell, so that rule mining over any
query window may be performed without going back to the
transaction database. We give formal proofs that the set of
itemsets chosen by RMW is sufficient to answer any query
and also prove that it is the optimal set to be computed
for 1 dimensional queries. We demonstrate through an extensive
empirical evaluation that RMW achieves extremely
fast query response time compared to existing methods, with
only moderate overhead in pre-computation and storage

A laser driven pulsed X-ray backscatter technique for enhanced penetrative imaging

X-ray backscatter imaging can be used for a wide range of imaging applications, in particular for industrial inspection and portal security. Currently, the application of this imaging technique to the detection of landmines is limited due to the surrounding sand or soil strongly attenuating the 10s to 100s of keV X-rays required for backscatter imaging. Here, we introduce a new approach involving a 140 MeV short-pulse (< 100 fs) electron beam generated by laser wakefield acceleration to probe the sample, which produces Bremsstrahlung X-rays within the sample enabling greater depths to be imaged. A variety of detector and scintillator configurations are examined, with the best time response seen from an absorptive coated BaF₂ scintillator with a bandpass filter to remove the slow scintillation emission components. An X-ray backscatter image of an array of different density and atomic number items is demonstrated. The use of a compact laser wakefield accelerator to generate the electron source, combined with the rapid development of more compact, efficient and higher repetition rate high power laser systems will make this system feasible for applications in the field.

Smartphone and GPS technology for freeroaming dog population surveillance -a methodological study (Studio metodologico sull’applicazione di smartphone e tecnologia GPS alla sorveglianza delle popolazioni di cani vaganti)

Free-roaming dogs (FRD) represent a potential threat to the quality of life in cities from an ecological, social and public health point of view. One of the most urgent concerns is the role of uncontrolled dogs as reservoirs of infectious diseases transmittable to humans and, above all, rabies. An estimate of the FRD population size and characteristics in a given area is the first step for any relevant intervention programme. Direct count methods are still prominent because of their non-invasive approach, information technologies can support such methods facilitating data collection and allowing for a more efficient data handling. This paper presents a new framework for data collection using a topological algorithm implemented as ArcScript in ESRI® ArcGIS software, which allows for a random selection of the sampling areas. It also supplies a mobile phone application for Android® operating system devices which integrates Global Positioning System (GPS) and Google Maps™. The potential of such a framework was tested in 2 Italian regions. Coupling technological and innovative solutions associated with common counting methods facilitate data collection and transcription. It also paves the way to future applications, which could support dog population management systems.

Laser Surface Treatment of Polyamide and NiTi Alloy and the Effects on Mesenchymal Stem Cell Response

Mesenchymal stem cells (MSCs) are known to play important roles in development, post-natal growth, repair, and regeneration of mesenchymal tissues. What is more, surface treatments are widely reported to affect the biomimetic nature of materials. This paper will detail, discuss and compare laser surface treatment of polyamide (Polyamide 6,6), using a 60 W CO2 laser, and NiTi alloy, using a 100 W fiber laser, and the effects of these treatments on mesenchymal stem cell response. The surface morphology and composition of the polyamide and NiTi alloy were studied by scanning electron microscopy (SEM) and X-ray photoemission spectroscopy (XPS), respectively. MSC cell morphology cell counting and viability measurements were done by employing a haemocytometer and MTT colorimetric assay. The success of enhanced adhesion and spreading of the MSCs on each of the laser surface treated samples, when compared to as-received samples, is evidenced in this work. © (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

Replicability of data collected for empirical estimation of relative pollen productivity

The effects of repeated survey and fieldwork timing on data derived from a recently proposed standard field methodology for empirical estimation of Relative Pollen Productivity have been tested. Seasonal variations in vegetation and associated pollen assemblages were studied in three contrasting cultural habitat types; semi-natural ancient woodlands, lowland heaths, and unimproved, traditionally managed hay meadows. Results show that in woodlands and heathlands the standard method generates vegetation data with a reasonable degree of similarity throughout the field season, though in some instances additional recording of woodland canopy cover should be undertaken, and differences were greater for woodland understorey taxa than for arboreal taxa. Large differences in vegetation cover were observed over the field season in the grassland community, and matching the phenological timing of surveys within and between studies is clearly important if RPP estimates from these sites are to be comparable. Pollen assemblages from closely co-located moss polsters collected on different visits are shown to be variable in all communities, to a greater degree than can be explained by the sampling error associated with pollen counting, and further study of moss polsters as pollen traps is recommended.