A streamlined life-cycle assessment and decision tool for used tyres recycling

In order to achieve progress towards sustainable resource management, it is essential to evaluate options for the reuse and recycling of secondary raw materials, in order to provide a robust evidence base for decision makers. This paper presents the research undertaken in the development of a web-based decision-support tool (the used tyres resource efficiency tool) to compare three processing routes for used tyres compared to their existing primary alternatives. Primary data on the energy and material flows for the three routes, and their alternatives were collected and analysed. The methodology used was a streamlined life-cycle assessment (sLCA) approach. Processes included were: car tyre baling against aggregate gabions; car tyre retreading against new car tyres; and car tyre shred used in landfill engineering against primary aggregates. The outputs of the assessment, and web-based tool, were estimates of raw materials used, carbon dioxide emissions and costs. The paper discusses the benefits of carrying out a streamlined LCA and using the outputs of this analysis to develop a decision-support tool. The strengths and weakness of this approach are discussed and future research priorities identified which could facilitate the use of life cycle approaches by designers and practitioners.

Comorbidities and current smoking status amongst patients starting renal replacement therapy in England, Wales and Northern Ireland from 2003 to 2008: national and centre-specific analyses

Introduction: The prevalence of comorbidities in incident renal replacement therapy (RRT) patients changes with age and varies between ethnic groups. This study describes these associations and the independent effect of comorbidities on outcomes. Methods: Adult patients starting RRT between 2003 and 2008 in centres reporting to the UK Renal Registry (UKRR) with data on comorbidity (n ¼ 14,909) were included. The UKRR studied the association of comorbidity with patient demographics, treatment modality, haemoglobin, renal function at start of RRT and subsequent listing for kidney transplantation. The relationship between comorbidities and mortality at 90 days and one year after 90 days from start of RRT was explored using Cox regression. Results: Completeness of comorbidity data was 40.0% compared with 54.3% in 2003. Of patients with data, 53.8% had one or more comorbidities. Diabetes mellitus and ischaemic heart disease were the most common conditions seen in 30.1% and 22.7% of patients respectively. Current smoking was recorded for 14.5% of incident RRT patients in the 6-year period. Comorbidities became more common with increasing age in all ethnic groups although the difference between the 65–74 and 75+ age groups was not significant. Within each age group, South Asians and Blacks had lower rates of comorbidity, despite higher rates of diabetes mellitus. In multivariate survival analysis, malignancy and ischaemic/neuropathic ulcers were the strongest independent predictors of poor survival at 1 year after 90 days from the start of RRT. Conclusion: Differences in prevalence of comorbid illnesses in incident RRT patients may reflect variation in access to health care or competing risk prior to commencing treatment. At the same time, smoking rates remained high in this ‘at risk’ population. Further work on this and ways to improve comorbidity reporting should be priorities for 2010–11.

Arsenic behaviour from groundwater and soil to crops:impacts on agriculture and food safety

High levels of As in groundwater commonly found in Bangladesh and other parts of Asia not only pose a risk via drinking water consumption but also a risk in agricultural sustainability and food safety. This review attempts to provide an overview of current knowledge and gaps related to the assessment and management of these risks, including the behaviour of As in the soil-plant system, uptake, phytotoxicity, As speciation in foods, dietary habits, and human health risks. Special emphasis has been given to the situation in Bangladesh, where groundwater via shallow tube wells is the most important source of irrigation water in the dry season. Within the soil-plant system, there is a distinct difference in behaviour of As under flooded conditions, where arsenite (AsIII) predominates, and under nonflooded conditions, where arsenate (AsV) predominates. The former is regarded as most toxic to humans and plants. Limited data indicate that As-contaminated irrigation water can result in a slow buildup of As in the topsoil. In some cases the buildup is reflected by the As levels in crops, in others not. It is not yet possible to predict As uptake and toxicity in plants based on soil parameters. It is unknown under what conditions and in what time frame As is building up in the soil. Representative phytotoxicity data necessary to evaluate current and future soil concentrations are not yet available. Although there are no indications that crop production is currently inhibited by As, long-term risks are clearly present. Therefore, with concurrent assessments of the risks, management options to further prevent As accumulation in the topsoil should already have been explored. With regard to human health, data on As speciation in foods in combination with food consumption data are needed to assess dietary exposure, and these data should include spatial and seasonal variability. It is important to control confounding factors in assessing the risks. In a country where malnutrition is prevalent, levels of inorganic As in foods should be balanced against the nutritional value of the foods. Regarding agriculture, As is only one of the many factors that may pose a risk to the sustainability of crop production. Other risk factors such as nutrient depletion and loss of organic matter also must be taken into account to set priorities in terms of research, management, and overall strategy.

Phylogeny versus body size as determinants of food web structure

Food webs are the complex networks of trophic interactions that stoke the metabolic fires of life. To understand what structures these interactions in natural communities, ecologists have developed simple models to capture their main architectural features. However, apparently realistic food webs can be generated by models invoking either predator-prey body-size hierarchies or evolutionary constraints as structuring mechanisms. As a result, this approach has not conclusively revealed which factors are the most important. Here we cut to the heart of this debate by directly comparing the influence of phylogeny and body size on food web architecture. Using data from 13 food webs compiled by direct observation, we confirm the importance of both factors. Nevertheless, phylogeny dominates in most networks. Moreover, path analysis reveals that the size-independent direct effect of phylogeny on trophic structure typically outweighs the indirect effect that could be captured by considering body size alone. Furthermore, the phylogenetic signal is asymmetric: closely related species overlap in their set of consumers far more than in their set of resources. This is at odds with several food web models, which take only the view-point of consumers when assigning interactions. The echo of evolutionary history clearly resonates through current food webs, with implications for our theoretical models and conservation priorities.

The Value of Reducing Cancer Risks at Contaminated Sites: Are More Knowledgeable People Willing to Pay More?

We use conjoint choice questions to investigate people's tastes for cancer risk reductions and income in the context of public programs that would provide for remediation at abandoned industrial contaminated sites. Our survey was self-administered using the computer by persons living in the vicinity of an important contaminated site on the Italian National Priority List. The value of a prevented case of cancer is €2.6 million, but this figure does vary with income, perceived exposure to contaminants, and respondent opinions about priorities that should be pursued by cleanup programs. © 2011 Society for Risk Analysis.

Welfare risk assessment:The benefits and common pitfalls

Risk is defined as a situation involving exposure to danger. Risk assessment by nature characterises the probability of a negative event occurring and quantifies the consequences of such an event. Risk assessment is increasingly being used in the field of animal welfare as a means of drawing comparisons between multiple welfare problems within and between species and identifying those that should be prioritised by policy-makers, either because they affect a large proportion of the population or because they have particularly severe consequences for those affected. The assessment of risk is typically based on three fundamental factors: intensity of consequences, duration affected by consequences and prevalence. However, it has been recognised that these factors alone do not give a complete picture of a hazard and its associated consequences. Rather, to get a complete picture, it is important to also consider information about the hazard itself: probability of exposure to the hazard and duration of exposure to the hazard. The method has been applied to a variety of farmed species (eg poultry, dairy cows, farmed fish), investigating housing, husbandry and slaughter procedures, as well as companion animals, where it has been used to compare inherited defects in pedigree dogs and horses. To what extent can we trust current risk assessment methods to get the priorities straight? How should we interpret the results produced by such assessments? Here, the potential difficulties and pitfalls of the welfare risk assessment method will be discussed: (i) the assumption that welfare hazards are independent; (ii) the problem of quantifying the model parameters; and (iii) assessing and incorporating variability and uncertainty into welfare risk assessments. © 2012 Universities Federation for Animal Welfare.

Identifying educational needs in end-of-life care for staff and families of residents in care facilities.

AIM: the purpose of this article is to describe educational needs in end-of-life (EoL) care for staff and families of residents in long-term care (LTC) facilities in the province of Ontario, Canada. Barriers to providing end-of-life care education in LTC facilities are also identified. DESIGN, SETTING AND PARTICIPANTS: cross-sectional survey of directors of care in all licensed LTC facilities in the province of Ontario, Canada. RESULTS: directors of care from 426 (76.9% response rate) licensed LTC facilities completed a postal-survey questionnaire. Topics identified as very important for staff education included pain and symptom management and communication with family members about EoL care. Priorities for family education included respecting the residents' expressed wishes for care and communication about EoL care. Having sufficient institutional resources was identified as a major barrier to providing continuing education to both staff and families. CONCLUSION: through examining educational needs in EoL care this study identified an environment of inadequate staffing and over-burdened care providers. The importance of increased staffing concomitant with education is a priority for LTC facilities.

Reaching common ground:A patient-family-based conceptual framework of quality EOL care

Improvement in the quality of end-of-life (EOL) care is a priority health care issue since serious deficiencies in quality of care have been reported across care settings. Increasing pressure is now focused on Canadian health care organizations to be accountable for the quality of palliative and EOL care delivered. Numerous domains of quality EOL care upon which to create accountability frameworks are now published, with some derived from the patient/family perspective. There is a need to reach common ground on the domains of quality EOL care valued by patients and families in order to develop consistent performance measures and set priorities for health care improvement. This paper describes a meta-synthesis study to develop a common conceptual framework of quality EOL care integrating attributes of quality valued by patients and their families. © 2005 Centre for Bioethics, IRCM.

Assessing health service needs:tools for health planning.

As fiscal pressures mount, health-planning and decision-making at smaller geographics scales must be more effective. Involving local constituents in needs assessments, it is believed, would lead to better identification and serving of regional demands and needs for health services. This article examines needs assessment as a tool to determine a community's service needs and establish priorities for the creation of programs. Various approaches used in needs assessments are described, including survey methods, structured groups and geographic information systems.

Assessing abundance and diversity patterns of soil microarthropod assemblages in northern Victoria Land (Antarctica)

This study aimed to: (1) assess differences between two quantitative sampling methods of soil microarthropods (visual census vs. stone washing) in ice-free areas located along a latitudinal gradient (from 72 degrees 37'S to 74 degrees 42'S) in northern Victoria Land (Antarctica); (2) furnish preliminary results on the abundance and diversity of mites and springtails in the studied areas. Visual census yielded reliable density estimates for adult collembolans and larger prostigmatic mites but did not detect small species. The study updates the distribution of several mites, including the southernmost record of an Oribatida species at global scale. Species composition was correlated with latitude but the uneven abundance distribution and local high beta-diversity probably reflect habitat fragmentation and population isolation. Under this circumstance nested sampling design should be usefully employed. Priorities and suitable methods for studying terrestrial microarthropod communities in continental Antarctica are discussed.

‘Reforming Social Work Education: Some Reflections on the Contribution of Practice Learning’

Social work in the UK is currently undergoing a process of major reform and a wide range of recommendations have been made aimed at improving practice and education. This paper focuses on the Social Work Reform Board's proposals for improving practice learning in qualifying level social work education. It examines how recommendations for better partnership working between Higher Education Institutions and employers and developing critical reflection in agencies are likely to impact on student learning. Drawing on experience of social work education in Northern Ireland it considers the potential of the Reform Board's proposals for improving the quality of practice learning and enhancing students' preparedness for employment. The paper concludes that differences in educational aims and priorities, resistant practice cultures and cut-backs in resourcing could present major obstacles that must be overcome if this potential is to be realised.

‘Preparing Social Workers for Practice: Re-evaluating Student Learning Needs’

Among the key developmental priorities that have been identified in the current process of reform taking place in social work in the UK is the need to improve social work students' preparedness to meet the challenges they will encounter in practice. This paper contributes to the current debate about this issue by reporting a research study that focused on final year undergraduates' experience of academic and practice learning and considered the impact of demographic factors, including age, gender, disability, previous experience and qualifications, on their perceptions of preparedness. The results indicate that students were satisfied with most aspects of preparatory teaching and learning. However, the findings also highlight areas in which students' preparation could be further enhanced, including their skills in dealing with conflict and managing risk. The results suggest that social work programmes should not overly depend on practice learning to prepare students to address the challenges presented by increasingly complex working environments and that educators need to work closely in collaboration with employing partners to ensure that the curriculum keeps up to date with the changing learning needs of practitioners.

Automated Methods for Virtual Maintainability & Aerospace Maintenance Planning

Abstract. Modern business practices in engineering are increasingly turning to post manufacture service provision in an attempt to generate additional revenue streams and ensure commercial sustainability. Maintainability has always been a consideration during the design process but in the past it has been generally considered to be of tertiary importance behind manufacturability and primary product function in terms of design priorities. The need to draw whole life considerations into concurrent engineering (CE) practice has encouraged companies to address issues such as maintenance, earlier in the design process giving equal importance to all aspects of the product lifecycle. The consideration of design for maintainability (DFM) early in the design process has the potential to significantly reduce maintenance costs, and improve overall running efficiencies as well as safety levels. However a lack of simulation tools still hinders the adaptation of CE to include practical elements of design and therefore further research is required to develop methods by which ‘hands on’ activities such as maintenance can be fully assessed and optimised as concepts develop. Virtual Reality (VR) has the potential to address this issue but the application of these traditionally high cost systems can require complex infrastructure and their use has typically focused on aesthetic aspects of mature designs. This paper examines the application of cost effective VR technology to the rapid assessment of aircraft interior inspection during conceptual design. It focuses on the integration of VR hardware with a typical desktop engineering system and examines the challenges with data transfer, graphics quality and the development of practical user functions within the VR environment. Conclusions drawn to date indicate that the system has the potential to improve maintenance planning through the provision of a usable environment for inspection which is available as soon as preliminary structural models are generated as part of the conceptual design process. Challenges still exist in the efficient transfer of data between the CAD and VR environments as well as the quantification of any benefits that result from the proposed approach. The result of this research will help to improve product maintainability, reduce product development cycle times and lower maintenance costs.

Identification of 100 fundamental ecological questions

Fundamental ecological research is both intrinsically interesting and provides the basic knowledge required to answer applied questions of importance to the management of the natural world. The 100th anniversary of the British Ecological Society in 2013 is an opportune moment to reflect on the current status of ecology as a science and look forward to high-light priorities for future work. To do this, we identified 100 important questions of fundamental importance in pure ecology. We elicited questions from ecologists working across a wide range of systems and disciplines. The 754 questions submitted (listed in the online appendix) from 388 participants were narrowed down to the final 100 through a process of discussion, rewording and repeated rounds of voting. This was done during a two-day workshop and thereafter. The questions reflect many of the important current conceptual and technical pre-occupations of ecology. For example, many questions concerned the dynamics of environmental change and complex ecosystem interactions, as well as the interaction between ecology and evolution. The questions reveal a dynamic science with novel subfields emerging. For example, a group of questions was dedicated to disease and micro-organisms and another on human impacts and global change reflecting the emergence of new subdisciplines that would not have been foreseen a few decades ago. The list also contained a number of questions that have perplexed ecologists for decades and are still seen as crucial to answer, such as the link between population dynamics and life-history evolution. Synthesis. These 100 questions identified reflect the state of ecology today. Using them as an agenda for further research would lead to a substantial enhancement in understanding of the discipline, with practical relevance for the conservation of biodiversity and ecosystem function. © 2013 The Authors. Journal of Ecology © 2013 British Ecological Society.

Existing and emerging high impact invasive species are characterized by higher functional responses than natives

Predicting ecological impacts of invasive species and identifying potentially damaging future invaders are research priorities. Since damage by invaders is characterized by their depletion of resources, comparisons of the ‘functional response’ (FR; resource uptake rate as a function of resource density) of invaders and natives might predict invader impact. We tested this by comparing FRs of the ecologically damaging ‘world's worst’ invasive fish, the largemouth bass (Micropterus salmoides), with a native equivalent, the Cape kurper (Sandelia capensis), and an emerging invader, the sharptooth catfish (Clarias gariepinus), with the native river goby (Glossogobius callidus), in South Africa, a global invasion hotspot. Using tadpoles (Hyperolius marmoratus) as prey, we found that the invaders consumed significantly more than natives. Attack rates at low prey densities within invader/native comparisons reflected similarities in predatory strategies; however, both invasive species displayed significantly higher Type II FRs than the native comparators. This was driven by significantly lower prey handling times by invaders, resulting in significantly higher maximum feeding rates. The higher FRs of these invaders are thus congruent with, and can predict, their impacts on native communities. Comparative FRs may be a rapid and reliable method for predicting ecological impacts of emerging and future invasive species.