Drifters, Party Boys and Incumbents: The life patterns of male street-based sex workers

This paper is based on a qualitative study of male street-based prostitution. It suggests that the street-based sector is more varied, with sellers adopting a wider range of working practices, than is commonly acknowledged in the literature on male prostitution. Drawing on data from Manchester, England I identify a number of ‘life patterns’ among male street sellers that reflect varied working practices based on issues around rational decision-making and the sex worker’s relationship to place and environment. The discussion has implications for urban policies around street-based sex work but also for a more general understanding of male sex work in international and comparative perspective.

Stone temperature and moisture variability under temperate environmental conditions: implications for sandstone weathering

Temperature and moisture conditions are key drivers of stone weathering processes in both natural and built environments. Given their importance in the breakdown of stone, a detailed understanding of their temporal and spatial variability is central to understanding present-day weathering behaviour and for predicting how climate change may influence the nature and rates of future stone decay.
Subsurface temperature and moisture data are reported from quarry fresh Peakmoor Sandstone samples exposed during summer (June–July) and late autumn / early winter (October–December) in a mid-latitude, temperate maritime environment. These data demonstrate that the subsurface thermal response of sandstone comprises numerous short-term (minutes), low magnitude fluctuations superimposed upon larger-scale diurnal heating and cooling cycles with distinct aspect-related differences. The short-term fluctuations create conditions in the outer 5–10 mm of stone that are much more ‘energetic’ in comparison to the more subdued thermal cycling that occurs deeper within the sandstone samples.
Data show that moisture dynamics are equally complex with a near-surface region (5–10 mm) in which frequent moisture cycling takes place and this, combined with the thermal dynamism exhibited by the same region may have significant implications for the nature and rate of weathering activity. Data indicate that moisture input from rainfall, particularly when it is wind-driven, can travel deep into the stone where it can prolong the time of wetness. This most often occurs during wetter winter months when moisture input is high and evaporative loss is low but can happen at any time during the year when the hydraulic connection between near-surface and deeper regions of the stone is disrupted with subsequent loss of moisture from depth slowing as it becomes reliant on vapour diffusion alone.
These data illustrate the complexity of temperature and moisture conditions in sandstone exposed to the ‘moderate’ conditions of a temperate maritime environment. They highlight differences in thermal and moisture cycling between near-surface (5–10 mm) and deeper regions within the stone and contribute towards a better understanding of the development of structural and mineralogical heterogeneity between the stone surface and substrate.

A review of the effect of the addition of hydrogen in the selective catalytic reduction of NOx with hydrocarbons on silver catalysts

Research is progressing fast in the field of the hydrogen assisted hydrocarbon selective catalytic reduction (HC-SCR) over Ag-based catalysts: this paper is a review of the work to date in this area. The addition of hydrogen to the HC-SCR reaction feed over Ag/Al2O3 results in a remarkable improvement in NO (x) conversion using a variety of different hydrocarbon feeds. There is some debate concerning the role that hydrogen has to play in the reaction mechanism and its effect on the form of Ag present during the reaction. Many of the studies use in situ UV-Vis spectroscopy to monitor the form of Ag in the catalyst and appear to indicate that the addition of hydrogen promotes the formation of small Ag clusters which are highly reactive for NO (x) conversion. However, some authors have expressed concern about the use of this technique for these materials and further work is required to address these issues before this technique can be used to give an accurate assessment of the state of Ag during the SCR reaction. A study using in situ EXAFS to probe the H-2 assisted octane-SCR reaction has shown that small Ag particles (containing on average 3 silver atoms) are formed during the SCR reaction but that the addition of H-2 to the feed does not result in any further change in the Ag particle size. This points to the direct involvement of H-2 in the reaction mechanism. Clearly the addition of hydrogen results in a large increase in the number and variety of adsorbed species on the surface of the catalyst during the reaction. Some authors have suggested that conversion of cyanide to isocyanate is the rate-determining step and that hydrogen promotes this conversion. Others have suggested that hydrogen reduces nitrates to more reactive nitrite species which can then activate the hydrocarbon; activation of the hydrocarbon to form acetates has been proposed as the key step. It is probable that all these promotional effects can take place and that it very much depends on the reaction temperature and feed conditions as to which one is most important.

An empirical study of green supply chain management practices amongst UK manufacturers

Purpose: The purpose of this paper is to examine the extent and nature of greening the supply chain (SC) in the UK manufacturing sector; and the factors that influence the breadth and depth of this activity.

Design/methodology/approach: Based on the findings from a sample of manufacturing organisations drawn from the membership of The Chartered Institute for Purchasing and Supply. Data are collected using a questionnaire, piloted and pre-tested before distribution with responses from 60 manufacturing companies.

Findings: On average manufacturers perceive the greatest pressure to improve environmental performance through legislation and internal drivers (IDs). The least influential pressures are related to societal drivers and SC pressures from individual customers. Green supply chain management (GSCM) practices amongst this “average” group of UK manufacturing organisations are focusing on internal, higher risk, descriptive activities, rather than proactive, external engagement processes. Environmental attitude (EA) is a key predictor of GSCM activity and those organisations that have a progressive attitude are also operationally very active. EA shows some relationship to legislative drivers but other factors are also influential. Operational activity may also be moderated by organisational contingencies such as risk, size, and nationality.

Research limitations/implications: The main limitation to this paper is the relatively small manufacturing sample.

Practical implications: This paper presents a series of constructs that identify GSCM operational activities companies to benchmark themselves against. It suggests which factors are driving these operational changes and how industry contingencies may be influential.

Originality/value: This paper explores what is driving environmental behaviour amongst an “average” sample of manufacturers, what specific management practices take place and the relationships between them.

Keywords: Manufacturing industries, Environmental management, Supply chain management, Sustainable development, United Kingdom
Paper type: Research paper

Effect of Mixture Composition on Relative Strength of Highly Flowable Underwater Concrete

Concrete used for underwater repair is often proportioned to spread readily into place and self-consolidate, and to develop high resistance to segregation and water dilution. An investigation was carried out to determine the effect of the dosage of antiwashout admixture, water-cementitious materials ratio (w/cm), and binder composition on the relative residual strength of highly flowable underwater concrete. Two types of antiwashout admixtures were used: a powdered welan gum at 0.07 and 0.15% by mass of binder, and a liquid-based cellulosic admixture employed at a high dosage of 1 to 1.65 L/100 kg of cementitious materials. The w/cms were set at 0.41 and 0.47 to secure adequate performance of underwater concrete for construction and repair. Four binder compositions were used: a Canadian Type 10 cement; a cement with 10% silica fume replacement; a cement with 50% replacement of granulated blast-furnace slag; and a ternary binder containing 6% silica fume and 20% Class F fly ash. Test results indicate that for a given washout mass loss and slump flow consistency, greater relative residual strength can be secured when the dosage of antiwashout admixture is increased, the w/cm is reduced, and a binary binder with 10% silica fume substitution or the ternary binder are employed. Such mixtures can develop relative residual compressive strengths of 85 and 80%, compared to mixtures cast in air, when the value of washout loss is limited to 4 and 6% for mixtures with slump flow values of 450 and 550 mm, respectively.

Textualising British Politics: Deconstructing the subject of British foreign policy

British politics has been described as a sub-discipline crying out for methodological and ideational cross-fertilisation. Where other areas of political science have benefited from new ideas, British politics has remained largely atheoretical and underdeveloped. This has changed recently with the rise of interpretivism but the study of British politics would also benefit from more serious engagement with poststructuralism. With this in mind, I examine how the thought of Jacques Derrida and deconstruction could be useful for thinking through the foundations of British politics, re-examining what appears natural or given and revealing the problematic and contradictory status of these foundations. After suggesting the need to 'textualise' British politics', I illustrate how deconstruction operates in a specific context, that of British foreign policy since 1997. This exploration reveals how certain decisions (such as the invasion of Iraq in 2003) became possible in the first place, and how their basis in an idea of an 'us' and a 'them', a coherent, autonomous subject separate from its object, is deeply problematic. Such a critical reading of British politics is impossible within the dominant interpretivist framework, and opens up new possibilities for thought which form an important supplement to existing ways of studying the field.

Dublin docklands. The urban fabric as cultural heritage

Introduction

Since the 1980s there have been major policies and projects for the redevelopment of Dublin Docklands. These projects were mainly aimed at profitable development of office, commercial and residential space, without a sound plan that would preserve the identity or community of the area. The recent shift in policies and urban design principles in the Dublin Docklands Area Master Plan 2008 shows that policy makers have acknowledged that mistakes were made in the last decades of the 20th century. The current map of the Dublin Docklands Area Master Plan 2008 gives us useful information about these changes. The Ringsend/ Irishtown area, which has kept a great part of its urban form and community identity throughout centuries, is described as an ‘area of protection of residential and services amenities’ (DDDA, 2008, map A). Meanwhile, the area of the Grand Canal Docks, recently developed, is described with the objective ‘to seek the social, economic and physical development or rejuvenation
within an area of mixed use of which residential and enterprise facilities would be the predominant uses’ (DDDA, 2008, map A). This classification shows that recent development has been unable to achieve the cohesion and complexity of existing neighbourhoods, revealing flaws not only in policy, but also in the built environment and approaches to urban design.

The shift towards the consideration of more community participation reveals a need to understand the tradition and past of these communities, while the urban fabric of small plots in the existing neighbourhoods, therefore, seems to have a very important role in the conservation of identity of place and providing the opportunity for difference within regularity. On the other hand, the new fabric of residential block developments in the docklands denies the possibility of developing a sense of community, and by providing only regularity, does not leave space for difference.

This paper will address questions related to urban morphology and town analysis in the case of Ringsend and Irishtown. This will provide a tool to learn from the past and perhaps find new models of development that might be less detrimental for the heritage of cities and urban communities. One of the ideas of this paper is to adhere to the new tendency in conservation policies to provide a broader analysis of urban areas, not only considering individual monuments in cities, but also analysing the significance of urban morphology and intangible heritage. It forms part of an OPW Post- Doctoral Fellowship in Conservation Studies and Environmental History.1 Research has been carried out in different areas of urban history of Dublin’s southern waterfront, including infrastructure history and a thorough analysis of the letters of the Pembroke Estate of the 19th century, which included the areas of Ringsend and Irishtown. However, this paper focuses on the study of urban form of the area and its significance to Dublin’s heritage.

Contesting Territorial Fixity?: A Case Study of Regeneration in Belfast

This paper looks at urban regeneration in Belfast as a stage on which the interaction between different structural dynamics (political, economic and cultural) is manifested in the city. It discusses how contested ideas of ‘space’, ‘place’ and ‘territory’ frame the ways in which Belfast has changed over recent years and asks if regeneration itself has the potential to transform the dynamic of deep-rooted ethno-national divisions. The research question is explored through a case study of proposed urban regeneration in north Belfast. It is found that, while there is evidence of transition to less exclusivistic attitudes in leisure and work spaces, asymmetrical conflict over residential space persists in ways which reproduce deep-rooted political and cultural patterns of territorial fixity and division.

The Reception of Byzantium in European Culture since 1500

Studies on the reception of the classical tradition are an indispensable part of classical studies. Understanding the importance of ancient civilization means also studying how it was used subsequently. This kind of approach is still relatively rare in the field of Byzantine Studies. This volume, which is the result of the range of interests in (mostly) non-English-speaking research communities, takes an important step to filling this gap by investigating the place and dimensions of ‘Byzantium after Byzantium’.
This collection of essays uses the idea of ‘reception-theory’ and expands it to show how European societies after Byzantium have responded to both the reality, and the idea of Byzantine Civilisation. The authors discuss various forms of Byzantine influence in the post-Byzantine world from architecture to literature to music to the place of Byzantium in modern political debates (e.g. in Russia). The intentional focus of the present volume is on those aspects of Byzantine reception less well-known to English-reading audiences, which accounts for the inclusion of Bulgarian, Czech, Polish and Russian perspectives. As a result this book shows that although so-called 'Byzantinism' is a pan-European phenomenon, it is made manifest in local/national versions.
The volume brings together specialists from various countries, mainly Byzantinists, whose works focus not only on Byzantine Studies (that is history, literature and culture of the Byzantine Empire), but also on the influence of Byzantine culture on the world after the Fall of Constantinople.