The technical merits of turbogenerating shown through the design, validation and implementation of a 1 dimensional engine model

Turbocompounding is the process of recovering a proportion of an engine’s fuel energy that would otherwise be lost in the exhaust process and adding it to the output power. This was first seen in the 1930s and is carried out by coupling an exhaust gas turbine to the crankshaft of a reciprocating engine. It has since been recognised that coupling the power turbine to an electrical generator instead of the crankshaft has the potential to reduce the fuel consumption further with the added flexibility of being able to decide how this recovered energy is used. The electricity generated can be used in automotive applications to assist the crankshaft using a flywheel motor generator or to power ancillaries that would otherwise have run off the crankshaft. In the case of stationary power plants, it can assist the electrical power output. Decoupling the power turbine from the crankshaft and coupling it to a generator allows the power electronics to control the turbine speed independently in order to optimise the specific fuel consumption for different engine operating conditions. This method of energy recapture is termed ‘turbogenerating’.

This paper gives a brief history of turbocompounding and its thermodynamic merits. It then moves on to give an account of the validation of a turbogenerated engine model. The model is then used to investigate what needs to be done to an engine when a turbogenerator is installed. The engine being modelled is used for stationary power generation and is fuelled by an induced biogas with a small portion of palm oil being injected into the cylinder to initiate combustion by compression ignition. From these investigations, optimum settings were found that result in a 10.90% improvement in overall efficiency. These savings relate to the same engine without a turbogenerator installed operating with fixed fuelling.

Three Melodies for Solo Vibraphone Recital performed by Cory Bracken, Percussionist Brooklyn College Studio 312 in Roosevelt Hall, Bedford Ave. Brooklyn, NY Authors: Lyon, E. Publication date: 27 Oct 2011

Thursday, October 27 · 7:00pm - 8:00pm
Location
Brooklyn College
Studio 312 in Roosevelt Hall, Bedford Ave.
Brooklyn, NY
Created By
Cory Bracken

Ratoath College - Building, 2007, 2015

Awards:
2007 Opus Architecture and Construction Awards - Highly Commended
2008 Architectural Association of Ireland - Selected for Exhibition
2008 RIAI Best Educational Building
2009 RIBA - Short listed International Award
2009 Imagine Inspirational School Design Compendium
2010 Irish Nomination to OECD Compendium of Exemplary Educational Facilities

Reviews and Publications:
2010 World Architecture News
2009 Perspective Vol 18/No 6
2009 Plan - Art of Architecture and Design
2008 Architecture Ireland, Dublin Volume 236
2007 World Architecture News
2008 Ratoath College, McGarry NÍ Éanaigh Architects ISBN 9780955914102

Addressing the technical and market challenges to high wind power integration in Ireland

Over the last decade there has been a rapid global increase in wind power stimulated by energy and climate policies. However, as wind power is inherently variable and stochastic over a range of time scales, additional system balancing is required to ensure system reliability and stability. This paper reviews the technical, policy and market challenges to achieving ambitious wind power penetration targets in Ireland’s All-Island Grid and examines a number of measures proposed to address these challenges. Current government policy in Ireland is to address these challenges with additional grid reinforcement, interconnection and open-cycle gas plant. More recently smart grid combined with demand side management and electric vehicles have also been presented as options to mitigate the variability of wind power. In addition, the transmission system operators have developed wind farm specific grid codes requiring improved turbine controls and wind power forecasting techniques.

Impact damage and repair of composite structures

This paper gives an overview of the work carried out in a GARTEUR (Group for Aeronautical Research and Technology in Europe) program, under the chairmanship of the author, to develop and validate analytical and numerical methods to characterise real impact damage in composite structures, particularly those designed to sustain load in a postbuckled state, and to study the durability of bonded repairs. GARTEUR is an inter-governmental agreement between the seven European countries with the largest direct employment in the Aerospace industry, to mobilise scientific and technical knowledge between the member countries. A number of Action Groups have been launched, since GARTEUR’s inception in the early 1970s, to address specific technical issues of interest to the participating members. The research presented in this paper was performed under Action Group 28 with partners from ONERA, EADS-CCR (France), DLR, AIRBUS-Deutschland, EADS-M (Germany), CIRA (Italy), INTA (Spain), SICOMP, Saab, (Sweden), NLR (The Netherlands), QinetiQ, BAE Systems, Imperial College London and the University of Sheffield (United Kingdom). The Action Group tasks were divided into four Work Elements (WEs): WE1-Prediction and characterisation of impact damage, WE2- Postbuckling with delamination, WE3-Repair and WE4-Fatigue. This paper outlines the main developments and achievements within each Work Element.

Creating a Circus of Words, Music, and Sound: From Roaratorio to Owenvarragh

This article documents the creation of a work by the authors based on a score written by the composer John Cage entitled 'Owenvarragh: A Belfast Circus on The Star Factory.' The article is part of a documentary portfolio in the journal which also includes a volume of the poetry created by Dowling in accordance with the instructions of the Cage score, and a series of documentary videos on the creation of the work and its first performance. Cage's score is based on his work 'Roaratorio: An Irish Circus on Finnegan's Wake' (1979) and it provides a set of detailed instructions for the musical realisation of a literary work. The article documents this first fully realised version of the score since Cage first produced 'Roaratorio' in 1979. The work, which was motivated by the Cage centenary year in 2012, musically realises Carson's book 'The Star Factory' (1998), a novelestic autobiography of Carson's Belfast childhood. The score required the creation of a fixed media piece based on over 300 field recordings of the sounds and places mentioned in the book, a volume of poetry created from the book which is recited to form the rhythmic spine of the work, and the arrangement of a performance including these two components along with live musical performance by the authors in collaboration with three other musicians under their direction, and a video installation created for the work. The piece has been performed three times: in association with the Sonorities 2012 Festival at Queen's University of Belfast (March 2012), at The Belfast Festival at Queen's (October 2012), and in the Rymer Auditoium of the University of York (June 2013).

Additional information:

The work which the article documents was conceived by Monaghan and Dowling, and the project was initiated by Monaghan after a she received a student prize to support its development and first performance. Elements of the project will be included in her PhD dissertation for which Dowling is a supervisor. Monaghan created the fixed media piece based on over 300 field recordings, the largest single aspect of realising Cage's score. Dowling was responsible for initiating the collaboration with Ciaran Carson, and for two other components: the creation of a volume of poetry derived from the literary work which is recited in the performance, and the creation of and supervision of the technical work on a video which accompanies the piece. The co-authors consulted closely during the work on these large components from May 2011 until March 2012 when the first performance took place. The co-authors also shared in numerous other artistic and organisational aspects of the production, including the arrangement and performnance of the music, musical direction to other performers, and marketing.

Safe eye surgery: non-technical aspects

The traditional training of surgeons focused exclusively on developing knowledge, clinical expertise, and technical (surgical) skills. However, analyses of the reasons for adverse events in surgery have revealed that many underlying causes originate from behavioural or non-technical aspects of performance (eg, poor communication among members of the surgical team) rather than from a lack of surgical (ie, technical) skills. Therefore, technical skills appear to be necessary but not sufficient to ensure patient safety. Paying attention to non-technical skills, such as team working, leadership, situation awareness, decision making, and communication, will increase the likelihood of maintaining high levels of error-free performance. Identification and training of non-technical skills has been developed for high-risk careers, such as civil aviation and nuclear power. Only recently, training in non-technical skills has been adopted by the surgical world and anaesthetists. Non-technical skills need to be tailored to the environment where they are used, and eye surgery has some substantial differences compared with other surgical areas, for example, high volume of surgery, use of local anaesthetics, and very sophisticated equipment. This review highlights the need for identification of the non-technical skills relevant to eye surgeons and promotion of their use in the training of eye surgeons.

Surgical checklist for cataract surgery:progress with the initiative by the Royal College of Ophthalmologists to improve patient safety

PurposeThe World Health Organisation (WHO) identified patient safety in surgery as an important public health matter and advised the adoption of a universal peri-operative surgical checklist. An adapted version of the WHO checklist has been mandatory in the National Health Service since 2010. Wrong intraocular lens (IOL) implantation is a particular safety concern in ophthalmology. The Royal College of Ophthalmologists launched a bespoke checklist for cataract surgery in 2010 to reduce the likelihood of preventable errors. We sought to ascertain the use of checklists in cataract surgery in 2012.Patients and methodsA survey of members of the Royal College of Ophthalmologists seeking views on the use of checklists in cataract surgery. Four hundred and sixty-nine completed responses were received (18% response rate).ResultsRespondents worked in England (75%), Scotland (11%), Wales (5%), Northern Ireland (2%), the Republic of Ireland (1%), and overseas (6%). Ninety-four per cent of respondents support the use of a checklist for cataract surgery and 85% say that they always use a checklist before cataract surgery. Sixty-seven per cent of cataract surgeons stated they undertake a pre-operative team brief. Thirty-six per cent use a cataract surgery checklist developed locally, 18% use the college's bespoke cataract surgery checklist, 39% use a generic surgical checklist, and 4% reported that they do not use a checklist.ConclusionNinety-three per cent of cataract surgeons responding to the questionnaire report using a surgical checklist and 67% use a team brief. However, only 54% use a checklist, which addresses the selection of the correct intraocular implant. We recommend wider adoption of checklists, which address risks relevant to cataract surgery, in particular the possibility of selection of an incorrect IOL.Eye advance online publication, 24 May 2013; doi:10.1038/eye.2013.101.

Clinical and technical factors associated with skin intrinsic fluorescence in subjects with type 1 diabetes from the Diabetes Control and Complications Trial/Epidemiology of Diabetes Interventions and Complications Study

The Diabetes Control and Complications Trial (DCCT)/Epidemiology of Diabetes Interventions and Complications(EDIC) studies have established multiyear mean hemoglobin A1c (HbA1c) as predictive of microvascular complications in persons with type 1 diabetes. However, multiyear mean HbA1c is not always available in the clinical setting. Skin advanced glycation end products (AGEs) are thought to partially reflect effects of hyperglycemia over time, and measurement of skin AGEs might be a surrogate for multiyear mean HbA1c. As certain AGEs fluoresce and skin fluorescence has been demonstrated to correlate with the concentration of skin AGEs, noninvasive measurement by skin intrinsic fluorescence(SIF) facilitates the exploration of the association of mean HbA1c and other clinical/technical factors with SIF using the detailed phenotypic database available in DCCT/EDIC.

The Effects of the Catalytic Converter on Two-Stroke Engine Performance, SAE Technical Paper 972741

The two-stroke engine, by its nature is very dependent on the unsteady gas dynamics within an exhaust system. This is demonstrated by the tuning effects on two-stroke engines, which have been well documented. In consideration of current emissions legislation, a two-stroke engine can be fitted with a catalytic converter for the outboard, utility or automotive markets. The catalytic substrate represents a major obstruction to the flow of exhaust gas, which hinders the progression of the main exhausted pulse, and in turn effects the scavenging of the cylinder and ultimately the performance of the engine.