FPGA Prototyping of Emerging Manycore Architectures for Parallel Programming Research using Formic Boards

Performance evaluation of parallel software and architectural exploration of innovative hardware support face a common challenge with emerging manycore platforms: they are limited by the slow running time and the low accuracy of software simulators. Manycore FPGA prototypes are difficult to build, but they offer great rewards. Software running on such prototypes runs orders of magnitude faster than current simulators. Moreover, researchers gain significant architectural insight during the modeling process. We use the Formic FPGA prototyping board [1], which specifically targets scalable and cost-efficient multi-board prototyping, to build and test a 64-board model of a 512-core, MicroBlaze-based, non-coherent hardware prototype with a full network-on-chip in a 3D-mesh topology. We expand the hardware architecture to include the ARM Versatile Express platforms and build a 520-core heterogeneous prototype of 8 Cortex-A9 cores and 512 MicroBlaze cores. We then develop an MPI library for the prototype and evaluate it extensively using several bare-metal and MPI benchmarks. We find that our processor prototype is highly scalable, models faithfully single-chip multicore architectures, and is a very efficient platform for parallel programming research, being 50,000 times faster than software simulation.

Preliminary investigation of mixed adsorbents for the removal of copper and methylene blue from aqueous solutions

With most recent studies being focused on the development of
advanced chemical adsorbents, this paper investigates the possibility of
using two natural low-cost materials for selective adsorption. Multiadsorbent
systems containing tea waste and dolomite have been tested for
their effectiveness in the removal of copper and methylene blue from
aqueous solutions. The effects of contact time, solution pH and
adsorption isotherms on the sorption behaviour were investigated. The
Langmuir and Freundlich isotherms adequately described the adsorption of
copper ions and methylene blue by both materials in different systems.
The highest adsorption capacities for Cu and MB were calculated as 237.7
at pH 4.5 and 150.44 mg.g‒1 at pH 7 for DO and TW+DO respectively. Tea
waste (TW) and dolomite (DO) were characterized by Fourier transform
infrared spectroscopy, scanning electron microscopy and Energy dispersive
X-ray analysis. The removal of Cu and MB by dolomite was mainly via
surface complexation while physisorption was responsible for most of the
Cu and MB adsorption onto tea waste. Identifying the fundamental mechanisms and behaviour is key to the development of practical multi-adsorbent packed columns.

The Management of Long-Term Sickness Absence in Large Public Sector Healthcare Organisations: A Realist Evaluation Using Mixed Methods

Purpose The success of measures to reduce long-term sickness absence (LTSA) in public sector organisations is contingent on organisational context. This realist evaluation investigates how interventions interact with context to influence successful management of LTSA. Methods Multi-method case study in three Health and Social Care Trusts in Northern Ireland comprising realist literature review, semi-structured interviews (61 participants), Process-Mapping and feedback meetings (59 participants), observation of training, analysis of documents. Results Important activities included early intervention; workplace-based occupational rehabilitation; robust sickness absence policies with clear trigger points for action. Used appropriately, in a context of good interpersonal and interdepartmental communication and shared goals, these are able to increase the motivation of staff to return to work. Line managers are encouraged to take a proactive approach when senior managers provide support and accountability. Hindering factors: delayed intervention; inconsistent implementation of policy and procedure; lack of resources; organisational complexity; stakeholders misunderstanding each other’s goals and motives. Conclusions Different mechanisms have the potential to encourage common motivations for earlier return from LTSA, such as employees feeling that they have the support of their line manager to return to work and having the confidence to do so. Line managers’ proactively engage when they have confidence in the support of seniors and in their own ability to address LTSA. Fostering these motivations calls for a thoughtful, diagnostic process, taking into account the contextual factors (and whether they can be modified) and considering how a given intervention can be used to trigger the appropriate mechanisms.

International inter-school competition to encourage children to walk to school: a mixed methods feasibility study.

Background: Active travel to school can be an important contributor to the total physical activity of children but levels have declined and more novel approaches are required to stimulate this as an habitual behaviour. The aim of this mixed methods study was to investigate the feasibility of an international walk to school competition supported by novel swipecard technology to increase children's walking to/from school. Methods: Children aged 9-13 years old participated in an international walk to school competition to win points for themselves, their school and their country over a 4-week period. Walks to and from school were recorded using swipecard technology and a bespoke website. For each point earned by participants, 1 pence (£0.01) was donated to the charity of the school's choice. The primary outcome was number of walks to/from school objectively recorded using the swipecard tracking system over the intervention period. Other measures included attitudes towards walking collected at baseline and week 4 (post-intervention). A qualitative sub-study involving focus groups with children, parents and teachers provided further insight. Results: A total of 3817 children (mean age 11.5±SD 0.7) from 12 schools in three cities (London and Reading, England and Vancouver, Canada) took part in the intervention, representing a 95% intervention participation rate. Results show a gradual decline in the average number of children walking to and from school over the 4-week period (week 1 mean 29%±SD2.5; week 2 mean 18%±SD3.6; week 3 mean 14%±SD4.0; week 4 mean 12%±SD1.1). Post intervention, 97% of children felt that walking to school helped them stay healthy, feel happy (81%) and stay alert in class (76%). These results are supported by qualitative findings from children, parents and teachers. Key areas for improvement include the need to incorporate strategies for maintenance of behaviour change into the intervention and also to adopt novel methods of data collection to increase follow-up rates. Conclusions: This mixed methods study suggests that an international walk to school competition using innovative technology can be feasibly implemented and offers a novel way of engaging schools and motivating children to walk to school.

UK medical graduates’ preparedness for practice (P4P): A multi-site qualitative study

Introduction Previous research has demonstrated mixed findings in terms of graduates’ P4P in terms of their knowledge and skills, and interpersonal, systemic and technological aspects (Monrouxe et al. 2014). Few studies have included diverse stakeholders from multiple sites and employing longitudinal methods. We therefore aimed to understand the extent to which UK medical graduates are prepared for practice as Foundation doctors. Methods Cross-sectional qualitative narrative interview and longitudinal audio-diary (LAD) studies with participants from England, Scotland, Wales and Northern Ireland. Study 1 comprised 27 group and 84 individual interviews (n=185) with participants representing different stakeholders (F1s, fully registered trainees, clinical educators, undergraduate/postgraduate deans/foundation programme directors, other healthcare professionals, employers, policy makers, government representatives, and patient/public representatives). Study 2 comprised LADs with 26 F1s over 4-months. Results Participants found it hard initially to conceptualise the term ‘preparedness for practice’. We identified 2187 personal incident narratives (i.e. stories of P4P experiences) across our data: 506 (23%) were classed as ‘prepared’, 730 (33%) as ‘unprepared’ and 951 (44%) as ‘unspecified’. We identified factors that facilitated (e.g. supportive supervisors/colleagues, opportunities for shadowing) and hindered (e.g. unsupportive or disrespectful colleagues, poor organization, understaffing) transitions into and through the Foundation programme. The LADs suggested that trainees felt more confident and competent over time, but that such development was not always linear as challenging circumstances (e.g. new rotations) sometimes made trainees feel unprepared for situations where they had previously indicated preparedness. Conclusion Our findings add to the existing evidence on medical graduates’ P4P in the UK (e.g. Goldacre et al. 2008; Illing et al. 2013). Our findings support the role of assistantships and supportive supervisors for smoothing transitions from student to F1. Further longitudinal and action research studies are now needed to follow students through their final-year assistantships and into their F2 year.

A numerical study of trailing edge geometry for low inertia automotive mixed flow turbines

Abstract. Mixed flow turbines can offer improvements over typical radial turbines used in automotive turbochargers, with respect to transient performance and low velocity ratio efficiency. Turbine rotor mass dominates the rotating inertia of the turbocharger’s rotating assembly, and any reductions of mass in the outer radii of the wheel, including the rotor back-disk, can significantly reduce this inertia and improve the acceleration of the assembly. Off-design, low velocity ratio conditions are typified by highly tangential flow at the rotor inlet and a non-zero inlet blade angle is desirable for such operating conditions. This is achievable in a Mixed Flow Turbine without increasing bending stresses within the rotor blade, which is beneficial in high speed and high inlet temperature turbine designs.
This study considers the meridional geometry of Mixed Flow Turbines using a multi-disciplinary study to assess both the structural and aerodynamic performance of each rotor, incorporating both CFD and FEA. Variations of rotor trailing edge were investigated at different operating conditions representing both on- and off-design operation within the constraints of existing hardware geometries. In all cases, the performance is benchmarked against an existing state-of-the-art radial turbocharger turbine with consideration of rotor inertia and its benefit for engine transient performance. The results indicate the influence of these parameters and this report details their benefits with respect to turbocharging a downsized, automotive engine.

Developing the clinical components of a complex intervention for a glaucoma screening trial:a mixed methods study

BACKGROUND: Glaucoma is a leading cause of avoidable blindness worldwide. Open angle glaucoma is the most common type of glaucoma. No randomised controlled trials have been conducted evaluating the effectiveness of glaucoma screening for reducing sight loss. It is unclear what the most appropriate intervention to be evaluated in any glaucoma screening trial would be. The purpose of this study was to develop the clinical components of an intervention for evaluation in a glaucoma (open angle) screening trial that would be feasible and acceptable in a UK eye-care service.

METHODS: A mixed-methods study, based on the Medical Research Council (MRC) framework for complex interventions, integrating qualitative (semi-structured interviews with 46 UK eye-care providers, policy makers and health service commissioners), and quantitative (economic modelling) methods. Interview data were synthesised and used to revise the screening interventions compared within an existing economic model.

RESULTS: The qualitative data indicated broad based support for a glaucoma screening trial to take place in primary care, using ophthalmic trained technical assistants supported by optometry input. The precise location should be tailored to local circumstances. There was variability in opinion around the choice of screening test and target population. Integrating the interview findings with cost-effectiveness criteria reduced 189 potential components to a two test intervention including either optic nerve photography or screening mode perimetry (a measure of visual field sensitivity) with or without tonometry (a measure of intraocular pressure). It would be more cost-effective, and thus acceptable in a policy context, to target screening for open angle glaucoma to those at highest risk but for both practicality and equity arguments the optimal strategy was screening a general population cohort beginning at age forty.

CONCLUSIONS: Interventions for screening for open angle glaucoma that would be feasible from a service delivery perspective were identified. Integration within an economic modelling framework explicitly highlighted the trade-off between cost-effectiveness, feasibility and equity. This study exemplifies the MRC recommendation to integrate qualitative and quantitative methods in developing complex interventions. The next step in the development pathway should encompass the views of service users.

HpMC: An Energy- Aware Management System for Multi-Level Memory Architectures

DRAM technology faces density and power challenges to increase capacity because of limitations of physical cell design. To overcome these limitations, system designers are exploring alternative solutions that combine DRAM and emerging NVRAM technologies. Previous work on heterogeneous memories focuses, mainly, on two system designs: PCache, a hierarchical, inclusive memory system, and HRank, a flat, non-inclusive memory system. We demonstrate that neither of these designs can universally achieve high performance and energy efficiency across a suite of HPC workloads. In this work, we investigate the impact of a number of multilevel memory designs on the performance, power, and energy consumption of applications. To achieve this goal and overcome the limited number of available tools to study heterogeneous memories, we created HMsim, an infrastructure that enables n-level, heterogeneous memory studies by leveraging existing memory simulators. We, then, propose HpMC, a new memory controller design that combines the best aspects of existing management policies to improve performance and energy. Our energy-aware memory management system dynamically switches between PCache and HRank based on the temporal locality of applications. Our results show that HpMC reduces energy consumption from 13% to 45% compared to PCache and HRank, while providing the same bandwidth and higher capacity than a conventional DRAM system.

Structure, mechanical, and electrical properties of high-density polyethylene/multi-walled carbon nanotube composites processed by compression molding and blown film extrusion

The structure and properties of melt mixed high-density polyethylene/multi-walled carbon nanotube (HDPE/MWCNT) composites processed by compression molding and blown film extrusion were investigated to assess the influence of processing route on properties. The addition of MWCNTs leads to a more elastic response during deformations that result in a more uniform thick-ness distribution in the blown films. Blown film composites exhibit better mechanical properties due to the enhanced orientation and disentanglement of MWCNTs. At a blow up ratio (BUR) of 3 the breaking strength and elongation in the machine direction of the film with 4 wt % MWCNTs are 239% and 1054% higher than those of compression molded (CM) samples. Resistivity of the composite films increases significantly with increasing BURs due to the destruction of conductive pathways. These pathways can be recovered partially using an appropriate annealing process. At 8 wt % MWCNTs, there is a sufficient density of nanotubes to maintain a robust network even at high BURs.

, Lexicographic Preferences in Discrete Choice Experiments: Consequences on Individual-Specific Willingness to Pay Estimates

In discrete choice experiments respondents are generally assumed to consider all of the attributes across each of the alternatives, and to choose their most preferred. However, results in this paper indicate that many respondents employ simplified lexicographic decision-making rules, whereby they have a ranking of the attributes, but their choice of an alternative is based solely on the level of their most important attribute(s). Not accounting for these simple decision-making heuristics introduces systemic errors and leads to biased point estimates, as they are a violation of the continuity axiom and a departure from the use of compensatory decision-making. In this paper the implications of lexicographic preferences are examined. In particular, using a mixed logit specification this paper investigates the sensitivity of individual-specific willingness to pay (WTP) estimates conditional on whether lexicographic decision-making rules are accounted for in the modelling of discrete choice responses. Empirical results are obtained from a discrete choice experiment that was carried out to address the value of a number of rural landscape attributes in Ireland

Sparse multi-carrier index keying OFDM with index separation over correlated sub-carriers

In this paper, we propose a sparse multi-carrier index keying (MCIK) method for orthogonal frequency division multiplexing (OFDM) system, which uses the indices of sparse sub-carriers to transmit the data, and improve the performance
of signal detection in highly correlated sub-carriers. Although a receiver is able to exploit a power gain with precoding in OFDM, the sensitivity of the signal detection is usually high as the orthogonality is not retained in highly dispersive
environments. To overcome this, we focus on developing the trade-off between the sparsity of the MCIK, correlation, and performances, analyzing the average probability of the error propagation imposed by incorrect index detection over highly correlated sub-carriers. In asymptotic cases, we are able to see how sparsity of MCIK should be designed in order to perform superior to the classical OFDM system. Based on this feature, sparse MCIK based OFDM is a better choice for low detection errors in highly correlated sub-carriers.

Mixed Messages: American Correspondences in Visual and Verbal Practices

Mixed Messages presents and interrogates ten distinct moments from the arts of nineteenth, twentieth and twenty-first century America where visual and verbal forms blend and clash. Charting correspondences concerned with the expression and meaning of human experience, this volume moves beyond standard interdisciplinary theoretical approaches to consider the written and visual artwork in embodied, cognitive, and contextual terms.

Offering a genuinely interdisciplinary contribution to the intersecting fields of art history, avant-garde studies, word-image relations, and literary studies, Mixed Messages takes in architecture, notebooks, poetry, painting, conceptual art, contemporary art, comic books, photographs and installations, ending with a speculative conclusion on the role of the body in the experience of digital mixed media. Each of the ten case studies explores the juxtaposition of visual and verbal forms in a manner that moves away from treating verbal and visual symbols as operating in binary or oppositional systems, and towards a consideration of mixed media, multi-media and intermedia work as brought together in acts of creation, exhibition, reading, viewing, and immersion. The collection advances research into embodiment theory, affect, pragmatist aesthetics, as well as into the continuing legacy of romanticism and of dada, conceptual art and surrealism in an American context.

Teaching Programming - Understanding Lecture Capture YouTube Analytics

ABSTRACT
The proliferation in the use of video lecture capture in universities worldwide presents an opportunity to analyse video watching patterns in an attempt to quantify and qualify how students engage and learn with the videos. It also presents an opportunity to investigate if there are similar student learning patterns during the equivalent physical lecture. The goal of this action based research project was to capture and quantitatively analyse the viewing behaviours and patterns of a series of video lecture captures across several university Java programming modules. It sought to study if a quantitative analysis of viewing behaviours of Lecture Capture videos coupled with a qualitative evaluation from the students and lecturers could be correlated to provide generalised patterns that could then be used to understand the learning experience of students during videos and potentially face to face lectures and, thereby, present opportunities to reflectively enhance lecturer performance and the students’ overall learning experience. The report establishes a baseline understanding of the analytics of videos of several commonly used pedagogical teaching methods used in the delivery of programming courses. It reflects on possible concurrences within live lecture delivery with the potential to inform and improve lecturing performance.