Association of Caveolin-1 gene polymorphism with kidney transplant fibrosis and allograft failure

Context: Caveolin-1 (CAV1) is an inhibitor of tissue fibrosis.
Objective: To study the association of CAV1 gene variation with kidney transplant outcome, using kidney transplantation as a model of accelerated fibrosis.
Design, Setting, and Patients: Candidate gene association and validation study. Genomic DNA from 785 white kidney transplant donors and their respective recipients (transplantations in Birmingham, England, between 1996 and 2006; median followup, 81 months) were analyzed for common variation in CAV1 using a singlenucleotide polymorphism (SNP) tagging approach. Validation of positive findings was sought in an independent kidney transplant donor-recipient cohort (transplantations in Belfast, Northern Ireland, between 1986 and 2005; n=697; median follow-up, 69 months). Association between genotype and allograft failure was initially assessed by Kaplan-Meier analysis, then in an adjusted Cox model.
Main Outcome Measure: Death-censored allograft failure, defined as a return to dialysis or retransplantation.
Results: The presence of donor AA genotype for the CAV1 rs4730751 SNP was associated with increased risk of allograft failure in the Birmingham group (donor AA vs non-AA genotype in adjusted Cox model, hazard ratio [HR], 1.97; 95% confidence interval [CI], 1.29-3.16; P=.002). No other tag SNPs showed a significant association. This finding was validated in the Belfast cohort (in adjusted Cox model, HR, 1.56; 95% CI, 1.07-2.27; P=.02). Overall graft failure rates were as follows: for the Birmingham cohort, donor genotype AA, 22 of 57 (38.6%); genotype CC, 96 of 431 (22.3%); and genotype AC, 66 of 297 (22.2%); and for the Belfast cohort, donor genotype AA, 32 of 48 (67%); genotype CC, 150 of 358 (42%); and genotype AC, 119 of 273 (44%).
Conclusion: Among kidney transplant donors, the CAV1 rs4730751 SNP was significantly associated with allograft failure in 2 independent cohorts.

Judicial Rehabilitation and the ‘Clean Bill of Health’ in Criminal Justice.

Drawing on an important survey of European and Australian policies toward ‘judicial rehabilitation,’ this article makes the following arguments. First, the rehabilitation movement should return to the origins of the word ‘rehabilitation’ and focus at least as much on efforts to remove and relieve ex-prisoner stigma as on treatment and reform efforts. There will be no ‘rehabilitation revolution’ without this. Second, these efforts should involve active, not passive redemption. Rehabilitation processes that require almost a decade or more of ‘crime-free’ behaviour before forgiving an individual for his or her crimes are just and fair, but they miss the point of rehabilitation. Policies should encourage, support and facilitate good behaviour and not just reward it in retrospect. Third, rehabilitation should not just be done, but be ‘seen to be done,’ ideally in a ritualised format. This sends an important message to the individual and wider society. Finally, I argue that it may be better to forgive than forget past crimes. That is, rather than burying past crimes as if they never happened, states should instead acknowledge and formally recognise that people can change, that good people can do bad things, and that all individuals should be able to move on from past convictions.

Pastoral

This chapter argues that Milton’s Epitaphium Damonis, a neo-Latin pastoral lament on the death of Charles Diodati, is marked by the author's Petrarchan self-fashioning. This is achieved through intertextual engagement with Petrarch's Bucolicum Carmen (especially Ecls. 1 and 10). Milton as the wandering Thyrsis, undertaking a methaphorical and literal journey into the world of Italian humanism, appropriates and adapts the metaphorical departure from and return to a pastoral world now shattered by plague and death. Recourse to the quasi-Augustinian monasticism of Petrarchan neo-Latin pastoral facilitates the poem's crossing of a monastic limen via its subtle interaction with a hagiographic intertext, the Vita Sancti Deodati. Now pastoral saint and scholar become united in death and in subsequent apotheosis.

High-surface thermally stable mesoporous gallium phosphates constituted by nanoparticles as primary building blocks

In constant, search for micro/mesoporous materials, gallium phosphates, have attracted continued interest due to the large pore size reported for some of these solids in comparison with analogous aluminum phosphates. However up to now, the porosity of gallium phosphates collapsed upon template removal or exposure to the ambient moisture. In the present work, we describe high-surface thermally stable mesoporous gallium phosphates synthesized from gallium propoxide and PCl3 and different templating agents such as amines (dipropylamine, piperidine and aminopiperidine) and quaternary ammonium salts (C16H33(CH3)3NBr and C16PyCl). These highly reactive precursors have so far not been used as gallium and phosphate sources for the synthesis of gallophosphates. Conceptually, our present synthetic procedure is based on the fast formation of gallium phosphate nanoparticles via the reaction of gallium propoxide with PCl3 and subsequent construction of the porous material with nanoparticles as building blocks. The organization of the gallophosphate nanoparticles in stable porous structures is effected by the templates. Different experimental procedures varying the molar composition of the sol-gel, pH and the pretreatment of gallium precursor were assayed, most of them leading to satisfactory materials in terms of thermal stability and porosity. In this way, a series of gallium phosphates with surface are above 200 m(2) g(-1), and narrow pore size from 3 to 6 nm and remarkable thermal stability (up to 550 degrees C) have been prepared. In some cases, the structure tends to show some periodicity and regularity as determined by XRD. The remarkable stability has allowed us to test the catalytic activity of gallophosphates for the aerobic oxidation of alkylaromatics with notable good results. Our report reopens the interest for gallophosphates in heterogeneous catalysis. (C) 2010 Elsevier Inc. All rights reserved.

Cultured responses: the production of social capital in faith based organisations

The theoretical concept of ‘social capital’ has been increasingly invoked in connection to religion by academics, policy makers, charities and Faith Based Organisations (FBOs). Drawing on the popularisation of the term by Robert Putnam, many in these groups have hailed the religious as one of the most productive generators of social capital in today’s societies. In this article, we examine this claim through ethnographic material relating to Faithworks, a national ‘movement’ of Christians who provide welfare services within their communities. We claim that to apply the term ‘social capital’ in a meaningful sociological manner to FBOs requires a return to Pierre Bourdieu’s use of the term in order to refuse to extricate it from the practices in which it is enmeshed.

Current methods and advances in forecasting of wind power generation

Wind power generation differs from conventional thermal generation due to the stochastic nature of wind. Thus wind power forecasting plays a key role in dealing with the challenges of balancing supply and demand in any electricity system, given the uncertainty associated with the wind farm power output. Accurate wind power forecasting reduces the need for additional balancing energy and reserve power to integrate wind power. Wind power forecasting tools enable better dispatch, scheduling and unit commitment of thermal generators, hydro plant and energy storage plant and more competitive market trading as wind power ramps up and down on the grid. This paper presents an in-depth review of the current methods and advances in wind power forecasting and prediction. Firstly, numerical wind prediction methods from global to local scales, ensemble forecasting, upscaling and downscaling processes are discussed. Next the statistical and machine learning approach methods are detailed. Then the techniques used for benchmarking and uncertainty analysis of forecasts are overviewed, and the performance of various approaches over different forecast time horizons is examined. Finally, current research activities, challenges and potential future developments are appraised. (C) 2011 Elsevier Ltd. All rights reserved.

Late glacial interhemispheric climate dynamics revealed in South African hyrax middens

Our ability to identify the timing and extent of past major climate fluctuations is central to understanding changes in the global climate system. Of the events that have occurred in recent geological time, the Younger Dryas (YD, 13-11.5 ka), an abrupt return to near-glacial conditions during the last glacial-interglacial transition (ca. 18-11.5 ka), is one of the most widely reported. While this event is apparent throughout the Northern Hemisphere (Peteet, 1995), evidence for its occurrence in the Southern Hemisphere remains equivocal due to a lack of well-dated terrestrial records. Here we report high-resolution stable carbon and nitrogen isotope records obtained from a rock hyrax midden, revealing the first unequivocal terrestrial manifestation of the YD from the southern African subtropics. These results provide key evidence for the relative influence of the YD, and suggest that a subtropical-temperate transition zone existed along the oceanic Subtropical Front (similar to 41 degrees S) across the Southern Hemisphere, with the Northern Hemisphere exerting a strong influence on all but the higher latitudes of the Southern Hemisphere after the Heinrich Stadial 1 (15 ka).

Pilgrimstad revisited - a multi-proxy reconstruction of Early/Middle Weichselian climate and environment at a key site in central Sweden

The site Pilgrimstad in central Sweden has often been cited as a key locality for discussions of ice-free/ice-covered intervals during the Early and Middle Weichselian. Multi-proxy investigations of a recently excavated section at Pilgrimstad now provide a revised picture of the climatic and environmental development between similar to 80 and 36 ka ago. The combination of sedimentology, geochemistry, OSL and 14C dating, and macrofossil, siliceous microfossil and chironomid analyses shows: (i) a lower succession of glaciofluvial/fluvial, lacustrine and glaciolacustrine sediments; (ii) an upper lacustrine sediment sequence; and (iii) Last Glacial Maximum till cover. Microfossils in the upper lacustrine sediments are initially characteristic for oligo- to mesotrophic lakes, and macrofossils indicate arctic/sub-arctic environments and mean July temperatures > 8 degrees C. These conditions were, however, followed by a return to a low-nutrient lake and a cold and dry climate. The sequence contains several hiatuses, as shown by the often sharp contacts between individual units, which suggests that ice-free intervals alternated with possible ice advances during certain parts of the Early and Middle Weichselian.

Educational professionals’ understanding of childhood traumatic brain injury

Primary objectives: To determine the understanding of educational professionals around the topic of childhood brain injury and explore the factor structure of the Common Misconceptions about Traumatic Brain Injury Questionnaire (CM-TBI).

Research design: Cross sectional postal survey.

Methods and procedures: The CM-TBI was posted to all educational establishments in one region of the United Kingdom. One representative from each school was asked to complete and return the questionnaire (N = 388).

Main outcomes and results: Differences were demonstrated between those participants who knew someone with a brain injury and those who did not, with a similar pattern being shown for those educators who had taught a child with brain injury. Participants who had taught a child with brain injury demonstrated greater knowledge in areas such as seatbelts/prevention, brain damage, brain injury sequelae, amnesia, recovery, and rehabilitation. Principal components analysis suggested the existence of four factors and the discarding of half the original items of the questionnaire.

Conclusions: In the first European study to explore this issue, we highlight that teachers are ill prepared to cope with children who have sustained a brain injury. Given the importance of a supportive school environment in return to life following hospitalisation, the lack of understanding demonstrated by teachers in this research may significantly impact on a successful return to school.

Living in Exospace: ISS and Discovery 1

The concept of exospace, as an alternative liveable structure, is discussed in this article to improve our comprehension of architectural space. Exospace is a man-made space designed for living beyond Earth’s atmosphere. Humankind has developed outerspace technologies to build the International Space Station as a significant experiment in exospace design. The ISS is a new building type for scientific experiments and for testing human existence in outerspace.

A fictional example of exospace, on the other hand, is Discovery 1 spaceship in Stanley Kubrick’s legendary science fiction film 2001: A Space Odyssey (1968). It is a ship travelling to Jupiter with a crew of five astronauts and HAL9000, the artificial intelligence controlling the ship. I will first discuss the ISS, and the space stations built before, from a spatial point of view. A spatial study of Discovery 1 will follow. Finally, through an understanding of exospace, I will return to architectural space with a critical appraisal. The comparison of architectural space with exospace will add to the discussion of space theories from a technological approach.

Exospace creates an alternative reality to architectural space. Architects cannot consider exospaces without comparing them with the spaces they design on Earth. The different context of outerspace shows that a work of terrestrial architecture is very much dependent on its context. A building is not an ‘object’ that can be located anywhere; it is designed for its site. Architectural space is a real, material, continuous, static and extroverted habitable space designed for and used in the specific physical context of Earth. The existence of exospace in science opens a new discussion in architectural theory, both terrestrial and extraterrestrial.

Optimal proportional-integral-derivative control of shape memory alloy actuators using genetic algorithm and the Preisach model

Shape memory alloy (SMA) actuators, which have the ability to return to a predetermined shape when heated, have many potential applications in aeronautics, surgical tools, robotics, and so on. Although the number of applications is increasing, there has been limited success in precise motion control owing to the hysteresis effect of these smart actuators. The present paper proposes an optimization of the proportional-integral-derivative (PID) control method for SMA actuators by using genetic algorithm and the Preisach hysteresis model.

Position control of shape memory alloy actuators using self tuning fuzzy PID controller

Shape Memory Alloy (SMA) actuators, which have the ability to return to a predetermined shape when heated, have many potential applications such as aeronautics, surgical tools, robotics and so on. Although the conventional PID controller can be used with slow response systems, there has been limited success in precise motion control of SMA actuators, since the systems are disturbed by unknown factors beside their inherent nonlinear hysteresis and changes in the surrounding environment of the systems. This paper presents a new development of a SMA position control system by using a self-tuning fuzzy PID controller. This control algorithm is used by tuning the parameters of the PID controller thereby integrating fuzzy inference and producing a fuzzy adaptive PID controller, which can then be used to improve the control performance of nonlinear systems. The experimental results of position control of SMA actuators using conventional and self-tuning fuzzy PID controllers are both included in this paper.

Modelling and Control of Shape Memory Alloy Actuators by using Preisach Model, Genetic Algorithm and Fuzzy Logic

Shapememoryalloy (SMA) actuators, which have the ability to return to a predetermined shape when heated, have many potential applications in aeronautics, surgical tools, robotics and so on. Nonlinearity hysteresis effects existing in SMA actuators present a problem in the motion control of these smart actuators. This paper investigates the control problem of SMA actuators in both simulation and experiment. In the simulation, the numerical Preisachmodel with geometrical interpretation is used for hysteresis modeling of SMA actuators. This model is then incorporated in a closed loop PID control strategy. The optimal values of PID parameters are determined by using geneticalgorithm to minimize the mean squared error between desired output displacement and simulated output. However, the control performance is not good compared with the simulation results when these parameters are applied to the real SMA control since the system is disturbed by unknown factors and changes in the surrounding environment of the system. A further automated readjustment of the PID parameters using fuzzylogic is proposed for compensating the limitation. To demonstrate the effectiveness of the proposed controller, real time control experiment results are presented.

Design and analysis of dual-rail circuits for security applications

Dual-rail encoding, return-to-spacer protocol, and hazard-free logic can be used to resist power analysis attacks by making energy consumed per clock cycle independent of processed data. Standard dual-rail logic uses a protocol with a single spacer, e.g., all-zeros, which gives rise to energy balancing problems. We address these problems by incorporating two spacers; the spacers alternate between adjacent clock cycles. This guarantees that all gates switch in every clock cycle regardless of the transmitted data values. To generate these dual-rail circuits, an automated tool has been developed. It is capable of converting synchronous netlists into dual-rail circuits and it is interfaced to industry CAD tools. Dual-rail and single-rail benchmarks based upon the advanced encryption standard (AES) have been simulated and compared in order to evaluate the method and the tool.

Evaluation of quality of life and priorities of patients with glaucoma

PURPOSE: To investigate the quality of life and priorities of patients with glaucoma.

METHODS: Patients diagnosed with glaucoma and no other ocular comorbidity were consecutively recruited. Clinical information was collected. Participants were asked to complete three questionnaires: EuroQuol (EQ-5D), time tradeoff (TTO), and choice-based conjoint analysis. The latter used five-attribute outcomes: (1) reading and seeing detail, (2) peripheral vision, (3) darkness and glare, (4) household chores, and (5) outdoor mobility. Visual field loss was estimated by using binocular integrated visual fields (IVFs).

RESULTS: Of 84 patients invited to participate, 72 were enrolled in the study. The conjoint utilities showed that the two main priorities were "reading and seeing detail" and "outdoor mobility." This rank order was stable across all segmentations of the data by demographic or visual state. However, the relative emphasis of these priorities changed with increasing visual field loss, with concerns for central vision increasing, whereas those for outdoor mobility decreased. Two subgroups of patients with differing priorities on the two main attributes were identified. Only 17% of patients (those with poorer visual acuity) were prepared to consider TTO. A principal component analysis revealed relatively independent components (i.e., low correlations) between the three different methodologies for assessing quality of life.

CONCLUSIONS: Assessments of quality of life using different methodologies have been shown to produce different outcomes with low intercorrelations between them. Only a minority of patients were prepared to trade time for a return to normal vision. Conjoint analysis showed two subgroups with different priorities. Severity of glaucoma influenced the relative importance of priorities.