Wearable inkjet-printed antenna performance for medical applications at 868/915 MHz

The use of biosensors attached to the body for health monitoring is now readily accepted, and the merits of such systems and their potential impact on healthcare receive much attention. Wearable medical systems used in clinical applications to monitor vital signs must be comfortable to wear, yet have robust performance to ensure reliable communications links. Additionally, and vital to the success of these innovations, is that these solutions are disposable to avoid risk of patient infection and this means that they must be ultra-low cost. Antennas optimized for printing using conductive inks offer new exciting advances in making a truly disposable solution.

Bioactive Gyroid Scaffolds Formed by Sacrificial Templating of Nanocellulose and Nanochitin Hydrogels as Instructive Platforms for Biomimetic Tissue Engineering

A sacrificial templating process using lithographically printed minimal surface structures allows complex de novo geometries of delicate hydrogel materials. The hydrogel scaffolds based on cellulose and chitin nanofibrils show differences in terms of attachment of human mesenchymal stem cells, and allow their differentiation into osteogenic outcomes. The approach here serves as a first example toward designer hydrogel scaffolds viable for biomimetic tissue engineering.

Designing for dementia : an assessment of the impact of the physical environment on wayfinding success for residents in long term care settings

It is acknowledged that one of the consequences of the ageing process is cognitive decline, which leads to an increase in the incidence of illnesses such as dementia. This has become ever more relevant due to the projected increase in the ageing demographic. Dementia affects visuo-spatial perception, causing difficulty with wayfinding, even during the early stages of the disease. The literature widely recognises the physical environment’s role in alleviating symptoms of dementia and improving quality of life for residents. It also identifies the lack of available housing options for older people with dementia and consequently the current stock is ill-equipped to provide adequate support.
Recent statistics indicate that 80% of those residing in nursing or residential care homes have some form of dementia or severe memory problems. The shift towards institutional care settings, the need for specialist support and care, places a greater impetus on the need for a person-centred approach to tackle issues related to wayfinding and dementia.
This thesis therefore aims to improve design for dementia in nursing and residential care settings in the context of Northern Ireland. This will be undertaken in order to provide a better understanding of how people with dementia experience the physical environment and to highlight features of the design that assist with wayfinding. Currently there are limited guidelines on design for dementia, meaning that many of these are theoretical, anecdotal and not definitive. Hence a greater verification to address the less recognised design issues is required. This is intended to ultimately improve quality of life, wellbeing, independence and uphold the dignity of people with dementia living in nursing or residential care homes.
The research design uses a mixed methods approach. A thorough preparation and consideration of ethical issues informed the methodology. The various facets were also trialled and piloted to identify any ethical, technological, methodological, data collection and analysis issues. The protocol was then amended to improve or resolve any of the aforementioned issues. Initially a questionnaire based on leading design recommendations was conducted with home managers. Semi-structured interviews were developed from this and conducted with staff and resident’s next of kin. An evidence-based approach was used to design a study which used ethnographic methods, including a wayfinding task. This followed a repeated measures design which would be used to actively engage residents with dementia in the research. Complementary to the wayfinding task, conversational and semi-structured interviews were used to promote dialogue and direct responses with the person with dementia. In addition to this, Space Syntax methodologies were used to examine the physical properties of the architectural layout. This was then cross-examined with interview responses and data from the wayfinding tasks.
A number of plan typologies were identified and were determined as synonymous with decision point types which needed to be made during the walks. The empirical work enabled the synthesis of environmental features which support wayfinding.
Results indicate that particular environmental features are associated with improved performance on the wayfinding tasks. By enhancing design for dementia, through identifying the attributes, challenges with wayfinding may be overcome and the benefits of the physical environment can be seen to promote wellbeing.
The implications of this work mean that the environmental features which have been highlighted from the project can be used to inform guidelines, thus adding to existing knowledge. Future work would involve the dissemination of this information and the potential for it to be made into design standards or regulations which champion design for dementia. These would increase awareness for designers and stakeholders undertaking new projects, extensions or refurbishments.
A person-centred, evidence-based design was emphasised throughout the project which guaranteed an in-depth study. There were limitations due to the available resources, time and funding. Future research would involve testing the identified environmental features within a specific environment to enable measured observation of improvements.

Bacteria microarrays as sensitive tools for exploring pathogen surface epitopes and recognition by host receptors

We describe a protocol for the generation and validation of bacteria microarrays and their application to the study of specific features of the pathogen's surface and interactions with host receptors. Bacteria were directly printed on nitrocellulose-coated glass slides, using either manual or robotic arrayers, and printing quality, immobilization efficiency and stability of the arrays were rigorously controlled by incorporating a fluorescent dye into the bacteria. A panel of wild type and mutant strains of the human pathogen Klebsiella pneumoniae, responsible for nosocomial and community-acquired infections, was selected as model bacteria, and SYTO-13 was used as dye. Fluorescence signals of the printed bacteria were found to exhibit a linear concentration-dependence in the range of 1 x 10(8) to 1 x 10(9) bacteria per ml. Similar results were obtained with Pseudomonas aeruginosa and Acinetobacter baumannii, two other human pathogens. Successful validation of the quality and applicability of the established microarrays was accomplished by testing the capacity of the bacteria array to detect recognition by anti-Klebsiella antibodies and by the complement subcomponent C1q, which binds K. pneumoniae in an antibody-independent manner. The biotin/AlexaFluor-647-streptavidin system was used for monitoring binding, yielding strain-and dose-dependent signals, distinctive for each protein. Furthermore, the potential of the bacteria microarray for investigating specific features, e.g. glycosylation patterns, of the cell surface was confirmed by examining the binding behaviour of a panel of plant lectins with diverse carbohydrate-binding specificities. This and other possible applications of the newly developed arrays, as e.g. screening/evaluation of compounds to identify inhibitors of host-pathogen interactions, make bacteria microarrays a useful and sensitive tool for both basic and applied research in microbiology, biomedicine and biotechnology.

Analysis of Transmission Loss with Droop Control in a Multi-Terminal HVDC System

High Voltage Direct Current (HVDC) electric power transmission is a promising technology for integrating offshore wind farms and interconnecting power grids in different regions. In order to maintain the DC voltage, droop control has been widely used. Transmission line loss constitutes an import part of the total power loss in a multi-terminal HVDC scheme. In this paper, the relation between droop controller design and transmission loss has been investigated. Different MTDC layout configurations are compared to examine the effect of droop controller design on the transmission loss.

Mechanical properties of structures 3D printed with cementitious powders

The three dimensional (3D) printing technology has undergone rapid development in the last few years and it is now possible to print engineering structures. This paper presents a study of the mechanical behavior of 3D printed structures using cementitious powder. Microscopic observation reveals that the 3D printed products have a layered orthotropic microstructure, in which each layer consists of parallel strips. Compression and flexural tests were conducted to determine the mechanical properties and failure characteristics of such materials. The test results confirmed that the 3D printed structures are laminated with apparent orthotropy. Based on the experimental results, a stress-strain relationship and a failure criterion based on the maximum stress criterion for orthotropic materials are proposed for the structures of 3D printed material. Finally, a finite element analysis was conducted for a 3D printed shell structure, which shows that the printing direction has a significant influence on the load bearing capacity of the structure.

Investigations on the Analysis and Design of Aperiodic Frequency Selective Surfaces for Space Applications

An investigation on the design of aperiodic FSS is presented. First, an accurate yet efficient method which allows the analysis of finite sized aperiodic FSS has been developed. Subsequently, an optimisation method is implemented which optimises all the FSS elements to obtain an FSS design with an aperiodic element layout. Preliminary designs of aperiodic FSS are presented and the numerical results are discussed.

Exploiting dynamic timing margins in microprocessors for frequency-over-scaling with instruction-based clock adjustment

Static timing analysis provides the basis for setting the clock period of a microprocessor core, based on its worst-case critical path. However, depending on the design, this critical path is not always excited and therefore dynamic timing margins exist that can theoretically be exploited for the benefit of better speed or lower power consumption (through voltage scaling). This paper introduces predictive instruction-based dynamic clock adjustment as a technique to trim dynamic timing margins in pipelined microprocessors. To this end, we exploit the different timing requirements for individual instructions during the dynamically varying program execution flow without the need for complex circuit-level measures to detect and correct timing violations. We provide a design flow to extract the dynamic timing information for the design using post-layout dynamic timing analysis and we integrate the results into a custom cycle-accurate simulator. This simulator allows annotation of individual instructions with their impact on timing (in each pipeline stage) and rapidly derives the overall code execution time for complex benchmarks. The design methodology is illustrated at the microarchitecture level, demonstrating the performance and power gains possible on a 6-stage OpenRISC in-order general purpose processor core in a 28nm CMOS technology. We show that employing instruction-dependent dynamic clock adjustment leads on average to an increase in operating speed by 38% or to a reduction in power consumption by 24%, compared to traditional synchronous clocking, which at all times has to respect the worst-case timing identified through static timing analysis.

PatchCity: Procedural City Generation using Texture Synthesis

PatchCity is a new approach to the procedural generation of city models. The algorithm uses texture synthesis to create a city layout in the visual style of one or more input examples. Data is provided in vector graphic form from either real or synthetic city definitions. The paper describes the PatchCity algorithm, illustrates its use, and identifies its strengths and limitations. The technique provides a greater range of features and styles of city layout than existing generative methods, thereby achieving results that are more realistic. An open source implementation of the algorithm is available.

Wearable antennas for medical monitoring systems

A wearable silver nano particle inkjet printed antenna suitable for wireless biomedical sensing is presented. The performance is evaluated on a synthetic variable layered phantom test-bed, representative of human tissue for operation in the 868/915 MHz, and 2400 MHz industrial, scientific and medical frequency bands. Antenna radiation efficiency measurements on the phantom were compared with antennas prototyped with copper. Total radiation efficiencies up to ???6.5 dB are reported, with less than 0.5 dB difference in performance between copper and silver nano particle variants, showing promising application for low-cost disposable wireless sensing.

Museum City - Improvisation and the narratives of space

This paper provides four viewpoints on the narratives of space, allowing us to think about possible relations between sites and sounds, reflecting on how places might tell stories, or how practitioners embed themselves in a place in order to shape cultural, social and/or political narratives through the use of sound. I propose four viewpoints that investigate the relationship between sites and sounds, where narratives are shaped and made through the exploration of specific sonic activities. These are:
- sonic activism
- sonic preservation
- sonic participatory action
- sonic narrative of space

I examine each of these ideas in turn before focusing in more detail on the final viewpoint, which provides the context for discussing and analysing a recent site-specific music improvisation project, entitled ‘Museum City’, a work that aligns closely with my proposal for a ‘sonic narrative of space’.
The work ‘Museum City’ by Pedro Rebelo, Franziska Schroeder, Ricardo Jacinto and André Cepeda specifically enables me to reflect on how derelict and/or transitional spaces might be re-examined through the use of sound, particularly through means of live music improvisation. The spaces examined as part ‘Museum City’ constitute either deserted sites or sites about to undergo changes in their architectural layout, their use and sonic make-up. The practice in ‘Museum City’ was born out of a performative engagement with[in] those sites, but specifically out of an intimate listening relationship by three improvisers situated within those spaces.
The theoretical grounding for this paper is situated within a wider context of practising and cognising musical spatiality, as proposed by Georgina Born (2013), particularly her proposition for three distinct lineages that provide an understanding of space in/and music. Born’s third lineage, which links more closely with practices of sound art and challenges a Euclidean orientation of pitch and timbre space, makes way for a heightened consideration of listening and ‘the place’ of sound. This lineage is particularly crucial for my discussion, since it positions music in relation to social experiences and the everyday, which the work ‘Museum City’ endeavoured to embrace.

Effects of Poly (ε-caprolactone) Coating on the Properties of Three-Dimensional Printed Porous Structures

Powder-based inkjet three-dimensional printing (3DP) to fabricate pre-designed 3D structures has drawn increasing attention. However there are intrinsic limitations associated with 3DP technology due to the weak bonding within the printed structure, which significantly compromises its mechanical integrity. In this study, calcium sulphate ceramic structures demonstrating a porous architecture were manufactured using 3DP technology and subsequently post-processed with a poly (ε-caprolactone) (PCL) coating. PCL concentration, immersion time, and number of coating layers were the principal parameters investigated and improvement in compressive properties was the measure of success. Interparticle spacing within the 3DP structures were successfully filled with PCL material. Consequently the compressive properties, wettability, morphology, and in vitro resorption behaviour of 3DP components were significantly augmented. The average compressive strength, Young’s modulus, and toughness increased 217%, 250%, and 315%, following PCL coating. Addition of a PCL surface coating provided long-term structural support to the host ceramic material, extending the resorption period from less than 7 days to a minimum of 56 days. This study has demonstrated that application of a PCL coating onto a ceramic 3DP structure was a highly effective approach to addressing some of the limitations of 3DP manufacturing and allows this advanced technology to be potentially used in a wider range of applications.