Evaluation of effective groundwater recharge of freshwater lens in small islands by the combined modeling of geoelectrical data and water heads

In small islands, a freshwater lens can develop due to the recharge induced by rain. Magnitude and spatial distribution of this recharge control the elevation of freshwater and the depth of its interface with salt water. Therefore, the study of lens morphology gives useful information on both the recharge and water uptake due to evapotranspiration by vegetation. Electrical resistivity tomography was applied on a small coral reef island, giving relevant information on the lens structure. Variable density groundwater flow models were then applied to simulate freshwater behavior. Cross validation of the geoelectrical model and the groundwater model showed that recharge exceeds water uptake in dunes with little vegetation, allowing the lens to develop. Conversely, in the low-lying and densely vegetated sectors, where water uptake exceeds recharge, the lens cannot develop and seawater intrusion occurs. This combined modeling method constitutes an original approach to evaluate effective groundwater recharge in such environments.
[Comte, J.-C., O. Banton, J.-L. Join, and G. Cabioch (2010), Evaluation of effective groundwater recharge of freshwater lens in small islands by the combined modeling of geoelectrical data and water heads, Water Resour. Res., 46, W06601, doi:10.1029/2009WR008058.]

Far field subwavelength source resolution using Phase Conjugating Lens Assisted With Evanescent-to-Propagating Spectrum Conversion

The imaging properties of a phase conjugating lens operating in the far field zone of the imaged source and augmented with scatterers positioned in the source near field region are theoretically studied in this paper. The phase conjugating lens consists of a double sided 2D assembly of straight wire elements, individually interconnected through phase conjugation operators. The scattering elements are straight wire segments which are loaded with lumped impedance loads at their centers. We analytically and numerically analyze all stages of the imaging process; i) evanescent-to-propagating spectrum conversion; ii) focusing properties of infinite or finite sized phase conjugating lens; iii) source reconstruction upon propagating-to-evanescent spectrum conversion. We show that the resolution that can be achieved depends critically on the separation distance between the imaged source and scattering arrangement, as well as on the topology of the scatterers used. Imaged focal widths of up to one-seventh wavelength are demonstrated. The results obtained indicate the possibility of such an arrangement as a potential practical means for realising using conventional materials devices for fine feature extraction by electromagnetic lensing at distances remotely located from the source objects under investigation

Frequency selective surface using nested split ring slot elements as a lens with mechanically reconfigurable beam steering capability

The design is described of a double layer frequency selective surface which can produce a differential phase shift of 180 ° as the wave propagates through it at normal incidence. The hand of an applied circularly polarized signal is reversed due to the 180° phase shift, and it is demonstrated that the exit circularly polarized output signal can be phase advanced or phase retarded by 180 ° upon rotation of the elements comprising the structure. This feature allows the surface to act as a spatial phase shifter. In this paper the beam steering capabilities of a 10 × 10 array of such elements are demonstrated. Here the individual elements comprising the array are rotated relative to each other in order to generate a progressive phase shift. At normal incidence the 3 dB Axial Ratio Bandwidth for LHCP to RHCP conversion is 5.3% and the insertion loss was found to be -2.3 dB, with minimum axial ratio of 0.05 dB. This array is shown to be able to steer a beam from -40 ° to +40 ° while holding axial ratio at the pointing angle to below 4 dB. The measured radiation patterns match the theoretical calculation and full-wave simulation results. © 2010 IEEE.

Retrodirective Rotman Lens Constraining Factors

The mechanism by which a retrodirective Rotman lens operates is examined theoretically and prediction is compared with measurement. By deriving the reflection matrix based on the phase delay relationship between the beam ports and the array ports we show that if the phase delay difference between neighbouring ports is constrained in a particular way that the reflection matrix becomes an inverse diagonal matrix and the Rotman lens functions as a Van Atta Array hence can perform retrodirective reflection. Further, the primary factors governing the bandwidth and beam pointing error of the lens are elaborated.

Rotman lens based-retrodirective array

A new type of broadband retrodirective array, which has been constructed using a microstrip Rotman lens, is presented. Automatic tracking of targets is obtained by exploiting the conjugate phase response of the beamforming network which is exhibited when the input ports are terminated with either open or short circuits. In addition, the true time-delay property of the Rotman lens gives broadband operation of the self-tracking array when used in conjunction with Vivaldi antennas. The simulated and measured bistatic and monostatic radar cross-section (RCS) patterns of a structure consisting of 13 beamports and 12 array ports are presented at frequencies in the range 8-12 GHz. Significantly enhanced RCS within the scan coverage ±40° is demonstrated by comparing the retrodirective behavior of a 12-element Vivaldi array terminated with and without the Rotman lens. © 2006 IEEE.

Reconfigurable beam forming using phase-aligned Rotman lens

The authors describe how a standard Rotman lens design can be readily adapted in order to allow reconfigurable beam
forming. This is achieved by applying concurrent excitations to the modified Rotman lens. A rationale for the design and
underlying behaviour of the modified, phase-aligned, Rotman lens as well as the deficiencies of a conventional Rotman lens
in this mode of operation are provided. Simulated and measured results are provided in order to illustrate the feasibility of the
approach suggested.

Investigation of the effect of simulated lens yellowing, transparency loss and refractive error on in vivo resonance Raman spectroscopy

To separately investigate the impact of simulated age-related lens yellowing, transparency loss and refractive error on measurements of macular pigment (MP) using resonance Raman spectroscopy.

Through the lens of the hospital magazine - Downshire and Holywell psychiatric hospitals in the 1960s and 1970s

An exploration of the pages of two psychiatric hospital magazines, Speedwell from Holywell Hospital, Antrim, and The Sketch from Downshire Hospital, Downpatrick, reveals the activity filled lives of patients and staff during the 1960s and 1970s. This was a time of great change in mental health care. It was also a time of political turbulence in Northern Ireland. With large in-patient populations, both hospitals had a range of occupational and sporting activities available to patients and staff. The magazines formed part of the effort to promote the ethos of a therapeutic community. While hospital magazines may be viewed as one aspect of an institutional system that allowed people to cut themselves from the wider society, they also provided opportunities for budding writers to express their views on life in a hospital from the service user perspective. As such they offer some valuable insights into the lives of psychiatric patients.

Aldo goes to Primary School: Experiencing school through the lens of the autistic spectrum.

The document draws largely on the results of research carried out by Hugh McNally and Dominic Morris of McNally Morris Architects and Keith McAllister of Queen’s University Belfast between 2012 and 2013. The objective of the study was to obtain a greater understanding of the impact that architecture and the built environment can have on people with autism spectrum disorder (ASD). The investigation into the subject centred on parents of young children with ASD in the belief that they are most likely to have an intimate knowledge of the issues that affect their children and are relatively well positioned to communicate those issues.

The study comprised a number of components.

- Focus Group Discussions with parents of children with ASD
- A Postal Questionnaire completed by parents of children with ASD
- A Comprehensive Desktop study of contemporary research into the relationship between ASD and aspects of the built environment.

Social stories are then used to help illustrate the world of a child with ASD to the reader and identify a series of potential difficulties for the pupil with ASD in a primary school setting. Design considerations and mitigating measures are then proposed for each difficulty.

The intention is that the document will raise awareness of some of the issues affecting primary school children with ASD and generate discourse among those whose task it is to provide an appropriate learning environment for all children. This includes teachers, health professionals, architects, parents, carers, school boards, government bodies and those with ASD themselves.

While this document uses the primary school as a lens through which to view some of the issues associated with ASD, it is the authors’ contention that the school can be seen as a “microcosm” for the wider world and that lessons taken from the learning environment can be applied elsewhere. The authors therefore hope that the document will help raise awareness of the myriad of issues for those with ASD that are embedded in the vast landscape of urban configurations and building types making up the spatial framework of our society.