Effect of relativistic plasma on extreme-ultraviolet harmonic emission from intense laser-matter interactions

Experiments were performed in which intense laser pulses (up to 9x10(19) W/cm(2)) were used to irradiate very thin (submicron) mass-limited aluminum foil targets. Such interactions generated high-order harmonic radiation (greater than the 25th order) which was detected at the rear of the target and which was significantly broadened, modulated, and depolarized because of passage through the dense relativistic plasma. The spectral modifications are shown to be due to the laser absorption into hot electrons and the subsequent sharply increasing relativistic electron component within the dense plasma.

Effect of laser intensity on fast-electron-beam divergence in solid-density plasmas

Metal foil targets were irradiated with 1 mu m wavelength (lambda) laser pulses of 5 ps duration and focused intensities (I) of up to 4x10(19) W cm(-2), giving values of both I lambda(2) and pulse duration comparable to those required for fast ignition inertial fusion. The divergence of the electrons accelerated into the target was determined from spatially resolved measurements of x-ray K-alpha emission and from transverse probing of the plasma formed on the back of the foils. Comparison of the divergence with other published data shows that it increases with I lambda(2) and is independent of pulse duration. Two-dimensional particle-in-cell simulations reproduce these results, indicating that it is a fundamental property of the laser-plasma interaction.

Design optimization of cold-formed steel portal frames taking into account the effect of building topology

Cold-formed steel portal frames are a popular form of construction for low-rise commercial, light industrial and agricultural buildings with spans of up to 20 m. In this article, a real-coded genetic algorithm is described that is used to minimize the cost of the main frame of such buildings. The key decision variables considered in this proposed algorithm consist of both the spacing and pitch of the frame as continuous variables, as well as the discrete section sizes.A routine taking the structural analysis and frame design for cold-formed steel sections is embedded into a genetic algorithm. The results show that the real-coded genetic algorithm handles effectively the mixture of design variables, with high robustness and consistency in achieving the optimum solution. All wind load combinations according to Australian code are considered in this research. Results for frames with knee braces are also included, for which the optimization achieved even larger savings in cost.

Up-regulation of the granulocyte adhesion molecule Mac-1 by autoantibodies in autoimmune vasculitis

The characteristic finding of autoantibodies in patients with vasculitis has raised the possibility that these antibodies play a role in the pathogenesis of the disease. The expression of adhesion molecules (AM) on leucocytes and endothelial cells is believed to be integral to the development of vasculitis. We therefore investigated the effect of sera, positive for anti-neutrophil cytoplasmic antibodies (ANCA) or anti-nuclear antibodies (ANA) from patients with vasculitis, on granulocyte expression of the adhesion molecule Mac-1 (CD11b). Autoantibody-positive sera from 15 out of 35 patients with vasculitis stimulated an up-regulation of Mac-1 on granulocytes. In most cases this effect was reproduced by the autoantibody-positive purified IgG fraction. Autoantibody-negative samples did not stimulate AM up-regulation. Of interest, preincubation of sera with purified antigens did not inhibit AM up-regulation by the autoantibody samples. Blocking the Fc receptors on granulocytes did result in a decrease of Mac-1 up-regulation, but this trend was not statistically significant. These results suggest that both ANCA and ANA have the capacity to up-regulate granulocyte AM expression, and that while Fc interaction with granulocyte Fc receptors is important, it is not the only mechanism whereby such autoantibodies activate cells.

Effect of precursor on the performance of alumina for the dehydration of methanol to dimethyl ether

Dimethyl ether (DME) is amongst one of the most promising alternative, renewable and clean fuels being considered as a future energy carrier. In this study, the comparative catalytic performance of γ-Al2O3 prepared from two common precursors (aluminum nitrate (AN) and aluminum chloride (AC)) is presented. The impact of calcination temperature was evaluated in order to optimize both the precursor and pre-treatment conditions for the production of DME from methanol in a fixed bed reactor. The catalysts were characterized by TGA, XRD, BET and TPD-pyridine. Under reaction conditions where the temperature ranged from 180 °C to 300 °C with a WHSV = 12.1 h−1 it was found that all the catalysts prepared from AN(η-Al2O3) showed higher activity, at all calcination temperatures, than those prepared from AC(γ-Al2O3). In this study the optimum catalyst was produced from AN and calcined at 550 °C. This catalyst showed a high degree of stability and had double the activity of the commercial γ-Al2O3 or 87% of the activity of commercial ZSM-5(80) at 250 °C.

The effect of a healthy lifestyle programme on 8-9 year olds from social disadvantage

Aims: This study assessed the efficacy of a school-based healthy lifestyle intervention (Sport for LIFE) for increasing physical activity, decreasing sedentary behaviour, reducing screen time behaviour, encouraging healthy attitudes and behaviour to nutrition, and reducing body mass index (BMI) in 8–9-year-old primary school children from lower socioeconomic backgrounds in Northern Ireland.

Methods: A non-randomised controlled trial of 416 children from 24 schools took part. Schools were randomly assigned to one of two groups, an intervention or control group with 12 schools in each group. The intervention group received a 12-week school-based programme based on social cognitive theory. At baseline and follow-up, groups completed questionnaires assessing physical activity, screen time behaviour and dietary patterns. On each occasion anthropometric assessments of height and weight were taken. Physical activity and sedentary behaviour were measured by accelerometry.

Results Significant effects were observed for vigorous, moderate and light activity for the intervention group at follow-up. Sedentary behaviour was significantly reduced for the intervention group but not for the control group. No significant effects of the intervention on BMI, screen time behaviour or attitudes to nutrition, with the exception of non-core foods, were shown.

Conclusions: The programme was effective in increasing physical activity and reducing sedentary behaviour, however no significant changes in screen time behaviour and attitude to nutrition, with the exception of non-core foods, were observed. Future research ideas are offered for tackling low levels of physical activity in children.

Comments and Additional Work on “High-Pressure Volumetric Properties of Imidazolium-Based Ionic Liquids: Effect of the Anion”

This works follows a publication of our group in J. Chem. Eng. Data2007, 52, 2204–2211 presenting high temperature and pressure density data for five imidazolium-based ionic liquids. At this period, very few ionic liquid density data were available in the literature, especially at high pressure, and the uncertainty of published results was calculated with respect to the literature data available for three of the five ionic liquids studied. Since 2007, the ionic liquid density databank has largely increased. In this work, a comparison of our published data in J. Chem. Eng. Data2007, 52, 2204–2211, with more than 1800 high pressure data coming from the literature up to December 2011 is presented to assess the uncertainty of our published values. The claimed uncertainty is close to 0.31 % for all IL density data sets except in the case of the [C1C2Im][EtSO4], where the uncertainty is up to 1.1 %. Reported data in J. Chem. Eng. Data2007, 52, 2204–2211, for this particular ionic liquid cannot be used as a reference. For this ionic liquid, new density measurements of the same sample batch have been remeasured by using the same experimental technique, and new experimental data presented herein are clearly higher than our previous published results. A 1H NMR analysis of the sample has confirmed hydrolysis of the ethylsulfate anion to ethanol and hydrogenate anion which explains the differences observed between our density data and the literature.

Effect of Turbine Inlet Temperature on Rotor Blade Tip Leakage Flow and Heat Transfer

One of the most critical gas turbine engine components, the rotor blade tip and casing, is exposed to high thermal load. It becomes a significant design challenge to protect the turbine materials from this severe situation. The purpose of this paper is to study numerically the effect of turbine inlet temperature on the tip leakage flow structure and heat transfer. In this paper, the effect of turbine inlet temperature on the tip leakage flow structure and heat transfer has been studied numerically. Uniform low (LTIT: 444 K) and high (HTIT: 800 K) turbine inlet temperature, as well as non-uniform inlet temperature have been considered. The results showed the higher turbine inlet temperature yields the higher velocity and temperature variations in the leakage flow aerodynamics and heat transfer. For a given turbine geometry and on-design operating conditions, the turbine power output can be increased by 1.33 times, when the turbine inlet temperature increases 1.80 times. Whereas the averaged heat fluxes on the casing and the blade tip become 2.71 and 2.82 times larger, respectively. Therefore, about 2.8 times larger cooling capacity is required to keep the same turbine material temperature. Furthermore, the maximum heat flux on the blade tip of high turbine inlet temperature case reaches up to 3.348 times larger than that of LTIT case. The effect of the interaction of stator and rotor on heat transfer features is also explored using unsteady simulations. The non-uniform turbine inlet temperature enhances the heat flux fluctuation on the blade tip and casing.

Effect-based proteomic detection of growth promoter abuse

Unregulated growth promoter use in food-producing animals is an issue of concern both from food safety and animal welfare perspectives. However, the monitoring of such practices is analytically challenging due to the concerted actions of users to evade detection. Techniques based on the monitoring of biological responses to exogenous administrations have been proposed as more sensitive methods to identify treated animals. This study has, for the first time, profiled plasma proteome responses in bovine animals to treatment with nortestosterone decanoate and 17 beta-oestradiol benzoate, followed by dexamethasone administration. Two-dimensional fluorescence differential in-gel electrophoresis analysis revealed a series of hepatic and acute-phase proteins within plasma whose levels were up- or down-regulated within phases of the treatment regime. Surface plasmon resonance (SPR) immuno-assays were developed to quantify responses of identified protein markers during the experimental treatment study with a view to developing methods which can be used as screening tools for growth promoter abuse detection. SPR analysis demonstrated the potential for plasma proteins to be used as indicative measures of growth promoter administrations and concludes that the sensitivity and robustness of any detection approach based on plasma proteome analysis would benefit from examination of a range of proteins representative of diverse biological processes rather being reliant on specific individual markers.

Effect of a clinical pathway to reduce hospitalizations in nursing home residents with pneumonia:A randomized controlled trial

Context: Nursing home residents with pneumonia are frequently hospitalized. Such transfers may be associated with multiple hazards of hospitalization as well as economic costs. Objective: To assess whether using a clinical pathway for on-site treatment of pneumonia and other lower respiratory tract infections in nursing homes could reduce hospital admissions, related complications, and costs. Design, Setting, and Participants: A cluster randomized controlled trial of 680 residents aged 65 years or older in 22 nursing homes in Hamilton, Ontario, Canada. Nursing homes began enrollment between January 2, 2001, and April 18, 2002, with the last resident follow-up occurring July 4, 2005. Residents were eligible if they met a standardized definition of lower respiratory tract infection. Interventions: Treatment in nursing homes according to a clinical pathway, which included use of oral antimicrobials, portable chest radiographs, oxygen saturation monitoring, rehydration, and close monitoring by a research nurse, or usual care. Main Outcome Measures: Hospital admissions, length of hospital stay, mortality, health-related quality of life, functional status, and cost. Results: Thirty-four (10%) of 327 residents in the clinical pathway group were hospitalized compared with 76 (22%) of 353 residents in the usual care group. Adjusting for clustering of residents in nursing homes, the weighted mean reduction in hospitalizations was 12% (95% confidence interval [CI], 5%-18%; P=.001). The mean number of hospital days per resident was 0.79 in the clinical pathway group vs 1.74 in the usual care group, with a weighted mean difference of 0.95 days per resident (95% CI, 0.34-1.55 days; P=.004). The mortality rate was 8% (24 deaths) in the clinical pathway group vs 9% (32 deaths) in the usual care group, with a weighted mean difference of 2.9% (95% CI, -2.0% to 7.9%; P=.23). There were no significant differences between the groups in health-related quality of life or functional status. The clinical pathway resulted in an overall cost savings of US $1016 per resident (95% CI, $207-$1824) treated. Conclusion: Treating residents of nursing homes with pneumonia and other lower respiratory tract infections with a clinical pathway can result in comparable clinical outcomes, while reducing hospitalizations and health care costs. ©2006 American Medical Association. All rights reserved.

Job Strain as a Risk Factor for Leisure-Time Physical Inactivity: An Individual-Participant Meta-Analysis of Up to 170,000 Men and Women

Unfavorable work characteristics, such as low job control and too high or too low job demands, have been suggested to increase the likelihood of physical inactivity during leisure time, but this has not been verified in large-scale studies. The authors combined individual-level data from 14 European cohort studies (baseline years from 19851988 to 20062008) to examine the association between unfavorable work characteristics and leisure-time physical inactivity in a total of 170,162 employees (50 women; mean age, 43.5 years). Of these employees, 56,735 were reexamined after 29 years. In cross-sectional analyses, the odds for physical inactivity were 26 higher (odds ratio 1.26, 95 confidence interval: 1.15, 1.38) for employees with high-strain jobs (low control/high demands) and 21 higher (odds ratio 1.21, 95 confidence interval: 1.11, 1.31) for those with passive jobs (low control/low demands) compared with employees in low-strain jobs (high control/low demands). In prospective analyses restricted to physically active participants, the odds of becoming physically inactive during follow-up were 21 and 20 higher for those with high-strain (odds ratio 1.21, 95 confidence interval: 1.11, 1.32) and passive (odds ratio 1.20, 95 confidence interval: 1.11, 1.30) jobs at baseline. These data suggest that unfavorable work characteristics may have a spillover effect on leisure-time physical activity.

Catalytic conversion of sodium lignosulphonate to vanillin –engineering aspects. Part 1 Effect of processing conditionson vanillin yield and selectivity

The commercial production of vanillin from sodium lignosulfonate under highly alkaline conditions, catalyzed by Cu2+ at elevated temperature and pressures up to 10 bar, has been simulated in a 3-L stirred reactor. Initially, the process was operated in the presence of nitrogen in dead-end mode, and it was shown that vanillin and vanillic acid were formed by hydrolysis at temperatures of 120, 140, and 160 °C. At the two higher temperatures, the amount of vanillin produced was the same. Subsequently, experiments were conducted at the same elevated pressures and temperatures with addition of air or oxygen-enriched air once the temperature in the reactor had reached temperatures similar to those used when only hydrolysis occurred. In this case, the concentration of vanillin at 140 and 160 °C was equal to that due to hydrolysis, and the subsequent 2-fold increase was due to oxidation. In addition, both vanillic acid and acetovanillone (which has rarely been reported) were produced, as was hydrogen. Thus, for the first time, it has been shown that the production of vanillin (and other compounds) from sodium lignosulfonate at elevated temperatures involves hydrolysis and oxidation, with hydrolysis starting at just above 100 °C, that is, much lower than has previously been reported. Approximately 50% is produced by each mechanism. In addition, the orders of the reactions of the different steps were estimated, and the reaction mechanisms are discussed.

Effect of acarbose on biochemical responses and clinical symptoms in dumping syndrome

A dose of 50 mg of acarbose was administered with a standard breakfast to 13 subjects with dumping syndrome. Significant attenuation of hyperglycaemia (p less than 0.01) was observed, and rises in plasma gastric inhibitory polypeptide, insulin and enteroglycagon were reduced (p less than 0.05). Plasma levels of neurotensin, vasoactive intestinal polypeptide and somatostatin were not affected. Dumping score was reduced, but this did not achieve statistical significance. In a longer-term study, 9 patients took acarbose, 50 mg t.i.d., for 1 month. No significant reduction in the number or severity of dumping attacks was observed, but a majority expressed a preference for the drug and some individuals experienced a marked improvement of symptoms.

The effect of socioeconomic deprivation on corneal graft survival in the United Kingdom

Objective: To investigate the effect of socioeconomic deprivation on cornea graft survival in the United Kingdom.

Design: Retrospective cohort study.

Participants: All the recipients (n = 13?644) undergoing their first penetrating keratoplasty (PK) registered on the United Kingdom Transplant Registry between April 1999 and March 2011 were included.

Methods: Data of patients' demographic details, indications, graft size, corneal vascularization, surgical complication, rejection episodes, and postoperative medication were collected at the time of surgery and 1, 2, and 5 years postoperatively. Patients with endophthalmitis were excluded from the study. Patients' home postcodes were used to determine the socioeconomic status using a well-validated deprivation index in the United Kingdom: A Classification of Residential Neighborhoods (ACORN). Kaplan–Meier survival and Cox proportional hazards regression were used to evaluate the influence of ACORN categories on 5-year graft survival, and the Bonferroni method was used to adjust for multiple comparisons.

Main Outcome Measures: Patients' socioeconomic deprivation status and corneal graft failure.

Results: A total of 13?644 patients received their first PK during the study periods. A total of 1685 patients (13.36%) were lost to follow-up, leaving 11?821 patients (86.64%) for analysis. A total of 138 of the 11?821 patients (1.17%) developed endophthalmitis. The risk of graft failure within 5 years for the patients classified as hard-pressed was 1.3 times that of the least deprived (hazard ratio, 1.3; 95% confidence interval, 1.1–1.5; P = 0.003) after adjusting for confounding factors and indications. There were no statistically significant differences between the causes of graft failure and the level of deprivation (P = 0.14).

Conclusions: Patients classified as hard-pressed had an increased risk of graft failure within 5 years compared with the least deprived patients.

Financial Disclosure(s): The author(s) have no proprietary or commercial interest in any materials discussed in this article

Atmospheric pressure, nonthermal plasma inactivation of MS2 bacteriophage: effect of oxygen concentration on virucidal activity

AimsThe main aim of this study was to determine the virucidal inactivation efficacy of an in-house-designed atmospheric pressure, nonthermal plasma jet operated at varying helium/oxygen feed gas concentrations against MS2 bacteriophage, widely employed as a convenient surrogate for human norovirus.

Methods and ResultsThe effect of variation of percentage oxygen concentration in the helium (He) carrier gas was studied and found to positively correlate with MS2 inactivation rate, indicating a role for reactive oxygen species (ROS) in viral inactivation. The inactivation rate constant increased with increasing oxygen concentrations up to 075% O-2. 3 log(10) (999%) reductions in MS2 viability were achieved after 3min of exposure to the plasma source operated in a helium/oxygen (9925%:075%) gas mixture, with >7 log(10) reduction after 9min exposure.

ConclusionsAtmospheric pressure, nonthermal plasmas may have utility in the rapid disinfection of virally contaminated surfaces for infection control applications.

Significance and Impact of StudyThe atmospheric pressure, nonthermal plasma jet employed in this study exhibits rapid virucidal activity against a norovirus surrogate virus, the MS2 bacteriophage, which is superior to previously published inactivation rates for chemical disinfectants.