Irish study on high-density schizophrenia families:field methods and power to detect linkage

Large samples of multiplex pedigrees will probably be needed to detect susceptibility loci for schizophrenia by linkage analysis. Standardized ascertainment of such pedigrees from culturally and ethnically homogeneous populations may improve the probability of detection and replication of linkage. The Irish Study of High-Density Schizophrenia Families (ISHDSF) was formed from standardized ascertainment of multiplex schizophrenia families in 39 psychiatric facilities covering over 90% of the population in Ireland and Northern Ireland. We here describe a phenotypic sample and a subset thereof, the linkage sample. Individuals were included in the phenotypic sample if adequate diagnostic information, based on personal interview and/or hospital record, was available. Only individuals with available DNA were included in the linkage sample. Inclusion of a pedigree into the phenotypic sample required at least two first, second, or third degree relatives with non-affective psychosis (NAP), one whom had schizophrenia (S) or poor-outcome schizo-affective disorder (PO-SAD). Entry into the linkage sample required DNA samples on at least two individuals with NAP, of whom at least one had S or PO-SAD. Affection was defined by narrow, intermediate, and broad criteria. The phenotypic sample contained 277 pedigrees and 1,770 individuals and the linkage sample 265 pedigrees and 1,408 individuals. Using the intermediate definition of affection, the phenotypic sample contained 837 affected individuals and 526 affected sibling pairs. Parallel figures for the linkage sample were 700 and 420. Individuals with schizophrenia from these multiplex pedigrees resembled epidemiologically sampled cases with respect to age at onset, gender distribution, and most clinical symptoms, although they were more thought-disordered and had a poorer outcome. Power analyses based on the model of linkage heterogeneity indicated that the ISHDSF should be able to detect a major locus that influences susceptibility to schizophrenia in as few as 20% of families. Compared to first-degree relatives of epidemiologically sampled schizophrenic probands, first-degree relatives of schizophrenic members from the ISHDSF had a similar risk for schizotypal personality disorder, affective illness, alcoholism, and anxiety disorder. With sufficient resources, large-scale ascertainment of multiplex schizophrenia pedigrees is feasible, especially in countries with catchmented psychiatric care and stable populations. Although somewhat more severely ill, schizophrenic members of such pedigrees appear to clinically resemble typical schizophrenic patients. Our ascertainment process for multiplex schizophrenia families did not select for excess familial risk for affective illness or alcoholism. With its large sample ascertained in a standardized manner from a relatively homogeneous population, the ISHDSF provides considerable power to detect susceptibility loci for schizophrenia.

Stiffness analysis of polymeric composites using the finite element method

The ability to predict the mechanical behavior of polymer composites is crucial for their design and manufacture. Extensive studies based on both macro- and micromechanical analyses are used to develop new insights into the behavior of composites. In this respect, finite element modeling has proved to be a particularly powerful tool. In this article, we present a Galerkin scheme in conjunction with the penalty method for elasticity analyses of different types of polymer composites. In this scheme, the application of Green's theorem to the model equation results in the appearance of interfacial flux terms along the boundary between the filler and polymer matrix. It is shown that for some types of composites these terms significantly affect the stress transfer between polymer and fillers. Thus, inclusion of these terms in the working equations of the scheme preserves the accuracy of the model predictions. The model is used to predict the most important bulk property of different types of composites. Composites filled with rigid or soft particles, and composites reinforced with short or continuous fibers are investigated. For each case, the results are compared with the available experimental results and data obtained from other models reported in the literature. Effects of assumptions made in the development of the model and the selection of the prescribed boundary conditions are discussed.

A simple method to determine the water activity of ethanol-containing samples

The water activity (a(w)) of microbial substrates, biological samples, and foods and drinks is usually determined by direct measurement of the equilibrium relative humidity above a sample. However, these materials can contain ethanol, which disrupts the operation of humidity sensors. Previously, an indirect and problematic technique based on freezing-point depression measurements was needed to calculate the a(w) when ethanol was present. We now describe a rapid and accurate method to determine the a(w) of ethanol-containing samples at ambient temperatures. Disruption of sensor measurements was minimized by using a newly developed, alcohol-resistant humidity sensor fitted with an alcohol filter. Linear equations were derived from a(w) measurements of standard ethanol-water mixtures, and from Norrish's equation, to correct sensor measurements. To our knowledge, this is the first time that electronic sensors have been used to determine the a(w) of ethanol- containing samples.

The Involvement of Phycocyanin Pigment in the Photodecomposition of the Cyanobacterial Toxin, Microcystin-LR

While investigating the destruction of the cyanobacterial hepatotoxin microcystin-LR in the presence of phycocyanin pigment via semiconductor photocatalysis, it became apparent that the pigment was catalysing the toxin decomposition. The mechanism of this process in terms of phycocyanin acting as a photo-oxygenation sensitizer via singlet oxygen and superoxide attack is explored. The absorption and fluorescence spectra of phycocyanin have been obtained and data on the properties of the excited state calculated. The established photo-oxygenation sensitizer rose bengal was also used as a catalyst for the photolytic decomposition of microcystin-LR to help elucidate the decomposition mechanism. 

Arsenate sensitivity in ericoid and ectomycorrhizal fungi

Isolates of the endomycorrhizal fungus Hymenoscyphus ericae and the ectomycorrhizal fungus Hebeloma crustuliniforme from soils uncontaminated with AsO₄/^3-, were compared with regard to their sensitivity to AsO₄/^3- in solution culture. When grown in liquid media amended with a range of AsO₄/^3- concentrations, H. ericae demonstrated reduced sensitivity to AsO₄/^3- compared to H. crustuliniforme. The concentrations causing 50% inhibition of growth (EC50) were 1.33 mol/m³ and 0.33 mol/m³, respectively, for H. ericae and H. crustuliniforme. The compound AsO₄/^3- is a PO₄/^3- analogue for the plasmalemma PO₄/^3- transporter. The presence of PO₄/^3- in the media at high concentrations ameliorated the toxic effects of AsO₄/^3- in both the ericoid and ectomycorrhizal fungi. This could be due to both suppression of the PO₄/^3- transporter under high phosporus status and competition of PO₄/^3- with AsO₄/^3- for the transport protein. The kinetics of AsO₄/^3- influx in H. ericae and H. crustuliniforme were also investigated. Hymenoscyphus ericae demonstrated a high K(m) value, 0.071 mol/m³, consistent with values obtained for AsO₄/^3- -tolerant plants. We suggest that the high K(m) value may be a mechanism used by H. ericae to express reduced AsO₄/^3- sensitivity. The ecological significance of this reduced sensitivity is also discussed.

Toxicity of chlorobenzenes to a lux-marked terrestrial bacterium, Pseudomonas fluorescens

Insertion of lux genes, encoding for bioluminescence in naturally bioluminescent marine bacteria, into the genome of Pseudomonas fluorescens resulted in a bioluminescent strain of this terrestrial bacterium. The lux- marked bacterium was used to toxicity test the chlorobenzene series. By correlating chlorobenzenes 50% effective concentration (EC50) values against physiochemical parameters, the physiochemical properties of chlorobenzenes that elicit toxic responses were investigated. The results showed that the more chlorinated the compounds, the more toxic they were to lux-marked P. fluorescens. Furthermore, it was shown that the more symmetrical the compound, the greater its toxicity to P. fluorescens. In general, the toxicity of a chlorobenzene was inversely proportional to its solubility (S) and directly proportional to its lipophilicity (K(ow). By correlating lux- marked P. fluorescens EC50 values, determined for chlorobenzenes, with toxicity values determined using Pimephales promelas (fathead minnow), Cyclotella meneghiniana (diatom), and Vibrio fischeri (marine bacterium), it was apparent that lux-marked P. fluorescens correlated well with freshwater species such as the diatoms and fathead minnow but not with the bioluminescent marine bacterium V. fischeri. The implications of these findings are that a terrestrial bacterium such as P. fluorescens should be used for toxicity testing of soils and freshwaters rather than the marine bacterium V. fischeri.

Edaphic factors affecting the toxicity and accumulation of arsenate in the earthworm Lumbricus terrestris

The toxicity and accumulation of arsenate was determined in the earthworm Lumbricus terrestris in soil from different layers of a forest profile. Toxicity increased fourfold between 2 and 10 d. Edaphic factors (pH, soil organic matter, and depth in soil profile) also affected toxicity with a three fold decrease in the concentration that causes 50% mortality with increasing depth in soil (from 0-70 mm to 500-700 mm). In a 4-d exposure study, there was no evidence of arsenic bioconcentration in earthworm tissue, although bioaccumulation was occurring. There was a considerable difference in tissue residues between living and dead earthworms, with dead worms having higher concentrations. This difference was dependent on both soil arsenate concentration and on soil type. Over a wide range of soil arsenate concentrations, earthworm arsenic residues are homeostatically maintained in living worms, but this homeostasis breaks down during death. Alternatively, equilibration with soil residues may occur via accumulation after death. In long-term accumulation studies in soils dosed with a sublethal arsenate concentration (40 μg/g dry weight), bioconcentration of arsenate did not occur until day 12, after which earthworm concentrations rose steadily above the soil concentration, with residues in worms three fold higher than soil concentrations by the termination of the study (23 d). This bioconcentration only occurred in depurated worms over the time period of the study. Initially, depurated worms had lower arsenic concentrations than undepurated until tissue concentrations were equivalent to the soil concentration. Once tissue concentration was greater than soil concentration, depurated worms had higher arsenic residues than undepurated.

Comparative Raman Study of Carbon Nanotubes Prepared by D.C. Arc Discharge and Catalytic Methods

The Raman spectra of carbon nanotubes prepared by catalytic (C-CNT) and d.c. arc discharge (D-CNT) methods are reported. A previously unnoticed third-order Raman peak at ca. 4248 cm-1 was observed in the Raman spectrum of D-CNT. The Raman features of D-CNT and C-CNT are similar to those of highly oriented pyrolytic graphite (HOPG) and active carbon, respectively. The data also suggest that the increase in disorder in D-CNT compared with HOPG is due to structural defects in D-CNT. © 1997 by John Wiley & Sons, Ltd.