Corrosion resistant fibre reinforced polymer (FRP) reinforcement for bridge deck slabs

This paper discusses the beneficial influence of compressive membrane action in fibre reinforced polymer (FRP)reinforced in-plane restrained slabs in bridge deck slabs and the improved service performance when archingaction occurs. Bridge deck slabs that are exposed to extreme environmental conditions can experience severecorrosion damage. Expansive corrosion in steel reinforcement significantly reduces the design life and durabilityof concrete structures; for example, on one short section of the M1 in Northern Ireland, nearly £1 million was spent last year on the maintenance and repair of bridges due to corrosion. Corrosion-resistant compositereinforcement such as basalt fibre reinforced polymer (BFRP) and glass fibre reinforced polymer (GFRP) provides adurable alternative to reinforcing steel. In this research, two BFRP reinforced slabs and two GFRP reinforced slabswere constructed using high-strength concrete with a target cube compressive strength of 65 N/mm2. The slabsrepresented typical full-scale dimensions of a real bridge deck slab 475 mm wide by 1425 mm long and 150 mmdeep. The service and ultimate behaviour of the slabs are discussed and the results are compared with the relevantdesign guidelines.

The persistent activity of Jupiter-family comets at 3-7 AU

We present an analysis of comet activity based on the Spitzer Space Telescope component of the Survey of the Ensemble Physical Properties of Cometary Nuclei. We show that the survey is well suited to measuring the activity of Jupiter-family comets at 3-7 AU from the Sun. Dust was detected in 33 of 89 targets (37 ± 6%), and we conclude that 21 comets (24 ± 5%) have morphologies that suggest ongoing or recent cometary activity. Our dust detections are sensitivity limited, therefore our measured activity rate is necessarily a lower limit. All comets with small perihelion distances (q <1.8 AU) are inactive in our survey, and the active comets in our sample are strongly biased to post-perihelion epochs. We introduce the quantity ɛfρ, intended to be a thermal emission counterpart to the often reported Afρ, and find that the comets with large perihelion distances likely have greater dust production rates than other comets in our survey at 3-7 AU from the Sun, indicating a bias in the discovered Jupiter-family comet population. By examining the orbital history of our survey sample, we suggest that comets perturbed to smaller perihelion distances in the past 150 yr are more likely to be active, but more study on this effect is needed.

Electron-impact excitation of FeII - Collision strengths and effective collision strengths for low-lying fine-structure forbidden transitions

Context. Absorption or emission lines of Fe II are observed in many astrophysical spectra and accurate atomic data are required to interpret these lines. The calculation of electron-impact excitation rates for transitions among even the lowest lying levels of Fe II is a formidable task for theoreticians.

Aims. In this paper, we present collision strengths and effective collision strengths for electron-impact excitation of Fe II for low-lying forbidden transitions among the lowest 16 fine-structure levels arising from the four LS states 3d(6)4s D-6(e), 3d(7) F-4(e), 3d(6)4s D-4(e), and 3d(7) P-4(e). The effective collision strengths are calculated for a wide range of electron temperatures of astrophysical importance from 30-100 000 K.

Methods. The parallel suite of Breit-Pauli codes are utilised to compute the collision cross sections for electron-impact excitation of Fe II and relativistic terms are included explicitly in both the target and the scattering approximation. 100 LS or 262-jj levels formed from the basis configurations 3d(6)4s, 3d(7), and 3d(6)4p were included in the wavefunction representation of the target, including all doublet, quartet, and sextet terms. Collision strengths for a total of 34191 individual transitions were computed.

Results. A detailed comparison is made with previous theoretical works and significant differences were found to occur in the effective collision strengths, particularly at low temperatures.

The impacts of management reform on irrigation water use efficiency in the Guanzhong plain, China

This paper examines the efficiency of the 1998 irrigation management reform in the Guanzhong Plain, Shaanxi, China, at farm and canal level. Stochastic frontier analysis is applied to estimate irrigation water use efficiency, based on panel data for 800 farmers, spread over 80 irrigation canals, for the period 1999–2005. Analysis of determinants of water use efficiency shows that at farm level, water price and disclosure are important factors. Compared to the base case of unreformed, management reform has a positive impact with water user association having the largest effect, followed by joint-stock co-operative and private company. The canal model is in line with the farm level model, although estimates are less significant.

Possibilities for change? Diversity in Post-Conflict Belfast

Belfast is often presented as an exemplary divided or post-conflict city. However, this focus can be limiting and an exploration of alternative narratives for Belfast is needed. This paper investigates the diversification of post-conflict Belfast in light of the substantial migration which has occurred in the last decade, outlining the complexities of an emerging narrative of diversity. We note discrepancies in how racial equality is dealt with at an institutional level and report on the unevenness of migrant geographies, issues which require future consideration. We also raise questions that problematize the easy assumption that cultural diversity ameliorates existing sectarian divisions.

Formation mechanism of levoglucosan and formaldehyde during cellulose pyrolysis

Biomass pyrolysis is an efficient way to transform raw biomass or organic waste materials into useable energy, including liquid, solid, and gaseous materials. Levoglucosan (1,6-anhydro-β-d-glucopyranose) and formaldehyde are two important products in biomass pyrolysis. The formation mechanism of these two products was investigated using the density functional theory (DFT) method based on quantum mechanics. It was found that active anhydroglucose can be obtained from a cellulose homolytic reaction during high-temperature steam gasification of the biomass process. Anhydroglucose undergoes a hydrogen-donor reaction and forms an intermediate, which can transform into the products via three pathways, one (path 1) for the formation of levoglucosan and two (paths 2 and 3) for formaldehyde. A total of six elementary reactions are involved. At a pressure of 1 atm, levoglucosan can be formed at all of the temperatures (450-750 K) considered in this simulation, whereas formaldehyde can be formed only when the temperature is higher than 475 K. Moreover, the energy barrier of levoglucosan formation is lower than that of formaldehyde, which is in agreement with the mechanism proposed in the experiments. © 2011 American Chemical Society.

Transcriptome analysis of a parasitic clade V nematode:comparative analysis of potential molecular anthelmintic targets in Cylicostephanus goldi

Clade V nematodes comprise several parasitic species that include the cyathostomins, primary helminth pathogens of horses. Next generation transcriptome datasets are available for eight parasitic clade V nematodes, although no equine parasites are included in this group. Here, we report next generation transcriptome sequencing analysis for the common cyathostomin species, Cylicostephanus goldi. A cDNA library was generated from RNA extracted from 17 C. goldi male and female adult parasites. Following sequencing using a 454 GS FLX pyrosequencer, a total of 475,215 sequencing reads were generated, which were assembled into 26,910 contigs. Using Gene Ontology and Kyoto Encyclopedia of Genes and Genomes databases, 27% of the transcriptome was annotated. Further in-depth analysis was carried out by comparing the C. goldi dataset with the next generation transcriptomes and genomes of other clade V nematodes, with the Oesophagostomum dentatum transcriptome and the Haemonchus contortus genome showing the highest levels of sequence identity with the cyathostomin dataset (45%). The C. goldi transcriptome was mined for genes associated with anthelmintic mode of action and/or resistance. Sequences encoding proteins previously associated with the three major anthelmintic classes used in horses were identified, with the exception of the P-glycoprotein group. Targeted resequencing of the glutamate gated chloride channel α4 subunit (glc-3), one of the primary targets of the macrocyclic lactone anthelmintics, was performed for several cyathostomin species. We believe this study reports the first transcriptome dataset for an equine helminth parasite, providing the opportunity for in-depth analysis of these important parasites at the molecular level. Sequences encoding enzymes involved in key processes and genes associated with levamisole/pyrantel and macrocyclic lactone resistance, in particular the glutamate gated chloride channels, were identified. This novel data will inform cyathostomin biology and anthelmintic resistance studies in future.

The main-belt comets: The Pan-STARRS1 perspective

We analyze a set of 760 475 observations of 333 026 unique main-belt objects obtained by the Pan-STARRS1(PS1) survey telescope between 2012 May 20 and 2013 November 9, a period during which PS1 discoveredtwo main-belt comets, P/2012 T1 (PANSTARRS) and P/2013 R3 (Catalina-PANSTARRS). PS1 cometdetection procedures currently consist of the comparison of the point spread functions (PSFs) of movingobjects to those of reference stars, and the flagging of objects that show anomalously large radial PSFwidths for human evaluation and possible observational follow-up. Based on the number of missed discoveryopportunities among comets discovered by other observers, we estimate an upper limit comet discoveryefficiency rate of 70% for PS1. Additional analyses that could improve comet discovery yields infuture surveys include linear PSF analysis, modeling of trailed stellar PSFs for comparison to trailed movingobject PSFs, searches for azimuthally localized activity, comparison of point-source-optimized photometryto extended-source-optimized photometry, searches for photometric excesses in objects withknown absolute magnitudes, and crowd-sourcing. Analysis of the discovery statistics of the PS1 surveyindicates an expected fraction of 59 MBCs per 106 outer main-belt asteroids (corresponding to a totalexpected population of 140 MBCs among the outer main-belt asteroid population with absolute magnitudesof 12 < HV < 19:5), and a 95% confidence upper limit of 96 MBCs per 106 outer main-belt asteroids(corresponding to a total of 230 MBCs), assuming a detection efficiency of 50%. We note howeverthat significantly more sensitive future surveys (particularly those utilizing larger aperture telescopes)could detect many more MBCs than estimated here. Examination of the orbital element distribution ofall known MBCs reveals an excess of high eccentricities (0:1 < e < 0:3) relative to the background asteroidpopulation. Theoretical calculations show that, given these eccentricities, the sublimation rate for atypical MBC is orders of magnitude larger at perihelion than at aphelion, providing a plausible physicalexplanation for the observed behavior of MBCs peaking in observed activity strength near perihelion.These results indicate that the overall rate of mantle growth should be slow, consistent with observationalevidence that MBC activity can be sustained over multiple orbit passages.

Disentangling the Harrisson Archive to Interpret the Spatial and Temporal Distribution of Vertebrate Remains at Niah Caves, Sarawak

During the 1950s and 1960s, excavations by the Sarawak Museum at Niah Cave in northwest Borneo produced an enormous archive of records and artefacts, including in excess of 750,000 macro- and micro-vertebrate remains. The excellent state of preservation of the animal bone, dating from the Late Pleistocene (c. 40 kya) to as recently as c. 500 years ago had the potential to provide unparalleled zooarchaeological information about early hunter-gatherer resource procurement, temporal changes in subsistence patterning, and the impact of peoples on the local and regional environment in Island Southeast Asia. However, the coarse-grained methods of excavation employed during the original investigations and the sheer scale of the archaeological record and bone assemblages dissuaded many researchers from attempting to tackle the Niah archives. This paper outlines how important information on the nature of the archaeological record at Niah has now finally been extracted from the archive using a combination of zooarchaeological analysis and reference to the extensive archaeological records from the site. Copyright (C) 2009 John Wiley & Sons, Ltd.

Highly CO2 sensitive extruded fluorescent plastic indicator film based on HPTS

Highly-sensitive optical fluorescent extruded plastic films are reported for the detection of gaseous and dissolved CO2. The pH-sensitive fluorescent dye used is 8-Hydroxypyrene-1,3,6-trisulfonic acid trisodium salt (HPTS, PTS-) coated on the surface of hydrophilic fumed silica and the base is tetrabutylammonium hydroxide (TBAH). The above components are used to create an HPTS pigment (i.e. HPTS/SiO2/TBAH) with a high CO2 sensitivity (%CO2(S=1/2) = 0.16%) and fast 50% response (t50↓) = 2 s and recovery (t50↑) = 5 s times. Highly CO2-sensitive plastic films are then fabricated, via the extrusion of the HPTS pigment powder in low-density polyethylene (LDPE). As with the HPTS-pigment, the luminescence intensity (at 515 nm) and absorbance (at 475 nm) of the HPTS plastic film decreases as the %CO2 in the ambient gas phase increases. The HPTS plastic film exhibits a high CO2 sensitivity, %CO2(S=1/2), of 0.29%, but a response time ˂2 min and recovery time ˂40 min, which is slower than that of the HPTS pigment. The HPTS plastic film is very stable under ambient conditions, (with a shelf life ˃ six month when stored in the dark but under otherwise ambient conditions). Moreover, the HPTS-film is stable in water, salt solution and even in acid (pH=2), and in each of these media it can be used to detect dissolved CO2.