Global Quantum Correlation in the Ising model

We study quantum correlations in an isotropic Ising ring under the effects of a transverse magnetic field. After characterizing the behavior of two-spin quantum correlations, we extend our analysis to global properties of the ring, using a figure of merit for quantum correlations that shows enough sensitivity to reveal the drastic changes in the properties of the system at criticality. This opens up the possibility to relate statistical properties of quantum many-body systems to suitably tailored measures of quantum correlations that capture features going far beyond standard quantum entanglement.

Fibre-optic strain sensor system with temperature compensation for arch bridge condition monitoring

This paper presents an innovative sensor system, created specifically for new civil engineering structural monitoring applications, allowing specially packaged fiber grating-based sensors to be used in harsh, in-the-field measurement conditions for accurate strain measurement with full temperature compensation. The sensor consists of two fiber Bragg gratings that are protected within a polypropylene package, with one of the fiber gratings isolated from the influence of strain and thus responding only to temperature variations, while the other is sensitive to both strain and temperature. To achieve this, the temperature-monitoring fiber grating is slightly bent and enclosed in a metal envelope to isolate it effectively from the strain. Through an appropriate calibration process, both the strain and temperature coefficients of each individual grating component when incorporated in the sensor system can be thus obtained. By using these calibrated coefficients in the operation of the sensor, both strain and temperature can be accurately determined. The specific application for which these sensors have been designed is seen when installed on an innovative small-scale flexi-arch bridge where they are used for real-time strain measurements during the critical installation stage (lifting) and loading. These sensors have demonstrated enhanced resilience when embedded in or surface-mounted on such concrete structures, providing accurate and consistent strain measurements not only during installation but subsequently during use. This offers an inexpensive and highly effective monitoring system tailored for the new, rapid method of the installation of small-scale bridges for a variety of civil engineering applications.

Right to War in the Islamic Tradition:Jihad and its Compatibility with Modern International Law (will be submitted to the publisher in April 2014)

In the last century, Islam drew the world’s attention though such phenomena as the Islamic revolution in Iran, the fierce Muslim resistance against the Soviet invasion of Afghanistan, and the assassination of Egypt’s President Sadat by a radical Islamic group. But it was when Osama Bin Laden and his organization Al Qaeda were established to have been behind the 11 September attacks in the US, the age-old images of Islam, the fanatical and belligerent religion threatening what the Western world stands for, were revitalized. The impact of 9/11 attacks was so great that even balanced portrayals of Islam were eclipsed by stereotypical images of a fundamental, anti-Western and warmongering religion that bore the hallmarks of medieval prejudices and rhetoric. The popular image tailored for the Western audience reflected Islam as monolithic, intrinsically aggressive, and determined to engage in religious wars against the interests and values of the Western civilisation.
This book intends to help reduce, at least to a reasonable degree, the impact of sweeping, and at times tendentious, generalisations about Islamic laws of warfare. The main purpose of this book is to place the legal, cultural and historical practices of Islamic wars in their broader socio-political contexts, thereby establishing that there has been no undisputed understanding of what defensive or aggressive warfare entails in Islam, whether in doctrine or in practice.

On the Qualitative Comparison of Decisions Having Positive and Negative Features

Making a decision is often a matter of listing and comparing positive and negative arguments. In such cases, the evaluation scale for decisions should be considered bipolar, that is, negative and positive values should be explicitly distinguished. That is what is done, for example, in Cumulative Prospect Theory. However, contrary to the latter framework that presupposes genuine numerical assessments, human agents often decide on the basis of an ordinal ranking of the pros and the cons, and by focusing on the most salient arguments. In other terms, the decision process is qualitative as well as bipolar. In this article, based on a bipolar extension of possibility theory, we define and axiomatically characterize several decision rules tailored for the joint handling of positive and negative arguments in an ordinal setting. The simplest rules can be viewed as extensions of the maximin and maximax criteria to the bipolar case, and consequently suffer from poor decisive power. More decisive rules that refine the former are also proposed. These refinements agree both with principles of efficiency and with the spirit of order-of-magnitude reasoning, that prevails in qualitative decision theory. The most refined decision rule uses leximin rankings of the pros and the cons, and the ideas of counting arguments of equal strength and cancelling pros by cons. It is shown to come down to a special case of Cumulative Prospect Theory, and to subsume the “Take the Best” heuristic studied by cognitive psychologists.

The OpenPMU Platform for Open Source Phasor Measurements

OpenPMU is an open platform for the development of phasor measurement unit (PMU) technology. A need has been identified for an open-source alternative to commercial PMU devices tailored to the needs of the university researcher and for enabling the development of new synchrophasor instruments from this foundation. OpenPMU achieves this through open-source hardware design specifications and software source code, allowing duplicates of the OpenPMU to be fabricated under open-source licenses. This paper presents the OpenPMU device based on the Labview development environment. The device is performance tested according to the IEEE C37.118.1 standard. Compatibility with the IEEE C37.118.2 messaging format is achieved through middleware which is readily adaptable to other PMU projects or applications. Improvements have been made to the original design to increase its flexibility. A new modularized architecture for the OpenPMU is presented using an open messaging format which the authors propose is adopted as a platform for PMU research.

A 64-point fourier transform chip for video motion compensation using phase correlation

Details of a new low power fast Fourier transform (FFT) processor for use in digital television applications are presented. This has been fabricated using a 0.6-µm CMOS technology and can perform a 64 point complex forward or inverse FFT on real-time video at up to 18 Megasamples per second. It comprises 0.5 million transistors in a die area of 7.8 × 8 mm and dissipates 1 W. The chip design is based on a novel VLSI architecture which has been derived from a first principles factorization of the discrete Fourier transform (DFT) matrix and tailored to a direct silicon implementation.

New FFT architecture and chip design for motion compensation based on phase correlation

Details of a new low power FFT processor for use in digital television applications are presented. This has been fabricated using a 0.6 µm CMOS technology and can perform a 64 point complex forward or inverse FFT on real-rime video at up to 18 Megasamples per second. It comprises 0.5 million transistors in a die area of 7.8×8 mm and dissipates 1 W. Its performance, in terms of computational rate per area per watt, is significantly higher than previously reported devices, leading to a cost-effective silicon solution for high quality video processing applications. This is the result of using a novel VLSI architecture which has been derived from a first principles factorisation of the DFT matrix and tailored to a direct silicon implementation.

Whole wafer magnetostriction metrology for magnetic films and multilayers

The requirements for metrology of magnetostriction in complex multilayers and on whole wafers present challenges. An elegant technique based on radius of curvature deformation of whole wafers in a commercial metrology tool is described. The method is based on the Villari effect through application of strain to a film by introducing a radius of curvature. Strain can be applied tensilely and compressively depending on the material. The design, while implemented on 3'' wafers, is scalable. The approach removes effects arising from any shape anisotropy that occurs with smaller samples, which can lead to a change in magnetic response. From the change in the magnetic anisotropy as a function of the radius, saturation magnetostriction ?s can be determined. Dependence on film composition and film thickness was studied to validate the radius of curvature approach with other techniques. ?s decreases from positive values to negative values through an increase in Ni concentration around the permalloy composition, and ?s also increases with a decrease in film thickness, in full agreement with previous reports. We extend the technique by demonstrating the technique applied to a multi-layered structure. These results verify the validity of the method and are an important step to facilitate further work in understanding how manipulation of multilayered films can offer tailored magnetostriction.

Programmable motion and separation of single magnetic particles on patterned magnetic surfaces

Motion of single micrometer-sized magnetic particles on patterned magnetic surfaces is controlled by a rotating magnetic field (see Figure and cover). Patterns of thin-film magnetic elements are tailored to form transport lines. Individual particles are separated by adding junctions to the transport lines. The method can improve existing applications in biotechnology and generate new ones in life sciences.

Ethics in neuroscience graduate training programs:Views and models from Canada

Consideration of the ethical, social, and policy implications of research has become increasingly important to scientists and scholars whose work focuses on brain and mind, but limited empirical data exist on the education in ethics available to them. We examined the current landscape of ethics training in neuroscience programs, beginning with the Canadian context specifically, to elucidate the perceived needs of mentors and trainees and offer recommendations for resource development to meet those needs. We surveyed neuroscientists at all training levels and interviewed directors of neuroscience programs and training grants. A total of 88% of survey respondents reported general interest in ethics, and 96% indicated a desire for more ethics content as it applies to brain research and clinical translation. Expert interviews revealed formal ethics education in over half of programs and in 90% of grants-based programs. Lack of time, resources, and expertise, however, are major barriers to expanding ethics content in neuroscience education. We conclude with an initial set of recommendations to address these barriers which includes the development of flexible, tailored ethics education tools, increased financial support for ethics training, and strategies for fostering collaboration between ethics experts, neuroscience program directors, and funding agencies. © 2010 the Authors. Journal Compilation © 2010 International Mind, Brain, and Education Society and Blackwell Publishing, Inc.

A Generic Reference Software Architecture for Load Balancing over Mirrored Web Servers: NaSr Case Study

With the rapid expansion of the internet and the increasing demand on Web servers, many techniques were developed to overcome the servers' hardware performance limitation. Mirrored Web Servers is one of the techniques used where a number of servers carrying the same "mirrored" set of services are deployed. Client access requests are then distributed over the set of mirrored servers to even up the load. In this paper we present a generic reference software architecture for load balancing over mirrored web servers. The architecture was designed adopting the latest NaSr architectural style [1] and described using the ADLARS [2] architecture description language. With minimal effort, different tailored product architectures can be generated from the reference architecture to serve different network protocols and server operating systems. An example product system is described and a sample Java implementation is presented.

Encouraging lifestyle behaviour change in mild cognitive impairment patients:development of appropriate educational material

Objectives: A healthy lifestyle may help maintain cognitive function and reduce the risk of developing dementia. This study employed a focus group approach in order to gain insight into opinions of mild cognitive impairment (MCI) patients, caregivers (CG) and health professionals (HP) regarding lifestyle and its relationship with cognition. The qualitative data were used to design, develop and pilot test educational material (EM) to help encourage lifestyle behaviour change. Method: Data gathering phase: structured interviews were conducted with HP (n = 10), and focus groups with MCI patients (n = 24) and CG (n = 12). EM was developed and pilot tested with a new group of MCI patients (n = 21) and CG (n = 6). Results: HP alluded to the lack of clinical trial evidence for a lifestyle and MCI risk link. Although they felt that lifestyle modifications should be recommended to MCI patients, they appeared hesitant in communicating this information and discussions were often patient-driven. MCI patients lacked awareness of the lifestyle cognition link. Participants preferred EM to be concise, eye-catching and in written format, with personal delivery of information favoured. Most pilot testers approved of the EM but were heterogeneous in terms of lifestyle, willingness to change and support needed to change. Conclusion: MCI patients need to be made more aware of the importance of lifestyle for cognition. EM such as those developed here, which are specifically tailored for this population would be valuable for HP who, currently, appear reticent in initiating lifestyle-related discussions. Following further evaluation, the EM could be used in health promotion activities targeting MCI patients.

Proton ordering energetics in ice phases

Results from first-principles calculations on the subtle energetics of proton ordering in ice phases are shown only to depend on the electrostatic components of the total energy. Proton ordered ice phases can therefore be predicted using electronic structure methods or a tailored potential model. However, analysis of the electron density reveals that high order multipole components, up to hexadecapole, are needed to adequately capture total energy differences between proton ordered and disordered phases. This suggests that current potential models may be unable to reproduce the position of proton ordered ice phases in the phase diagram without extensions to describe high order electrostatics. (c) 2006 Elsevier B.V. All rights reserved.

Developing mRNA-based biomarkers from formalin-fixed paraffin-embedded tissue

Cancer is a complex and heterogeneous disease which is one of the leading causes of death in Western civilisations. Thus, oncology is viewed as a primary focus for personalized medicine. It is recognised that cancer treatment needs to be better tailored in order to improve patient outcome. Patient tumor samples will be required to characterize cancer at a molecular level and identify where there may be disease subgroups that should be treated differently. The use of formalin-fixed paraffin-embedded tissue is important for enabling such studies. In this report, we focus on the challenges that have been faced to date along with the technological developments that have now made this possible. We also highlight the impact this may have on drug and diagnostic development.

Generic low-latency NoC router architecture for FPGA computing systems

A novel cost-effective and low-latency wormhole router for packet-switched NoC designs, tailored for FPGA, is presented. This has been designed to be scalable at system level to fully exploit the characteristics and constraints of FPGA based systems, rather than custom ASIC technology. A key feature is that it achieves a low packet propagation latency of only two cycles per hop including both router pipeline delay and link traversal delay - a significant enhancement over existing FPGA designs - whilst being very competitive in terms of performance and hardware complexity. It can also be configured in various network topologies including 1-D, 2-D, and 3-D. Detailed design-space exploration has been carried for a range of scaling parameters, with the results of various design trade-offs being presented and discussed. By taking advantage of abundant buildin reconfigurable logic and routing resources, we have been able to create a new scalable on-chip FPGA based router that exhibits high dimensionality and connectivity. The architecture proposed can be easily migrated across many FPGA families to provide flexible, robust and cost-effective NoC solutions suitable for the implementation of high-performance FPGA computing systems. © 2011 IEEE.