Development of sampling methods for Raman analysis of solid dosage forms of therapeutic and illicit drugs

The results of a study aimed at determining the most important experimental parameters for automated, quantitative analysis of solid dosage form pharmaceuticals (seized and model 'ecstasy' tablets) are reported. Data obtained with a macro-Raman spectrometer were complemented by micro-Raman measurements, which gave information on particle size and provided excellent data for developing statistical models of the sampling errors associated with collecting data as a series of grid points on the tablets' surface. Spectra recorded at single points on the surface of seized MDMA-caffeine-lactose tablets with a Raman microscope (lambda(ex) = 785 nm, 3 mum diameter spot) were typically dominated by one or other of the three components, consistent with Raman mapping data which showed the drug and caffeine microcrystals were ca 40 mum in diameter. Spectra collected with a microscope from eight points on a 200 mum grid were combined and in the resultant spectra the average value of the Raman band intensity ratio used to quantify the MDMA: caffeine ratio, mu(r), was 1.19 with an unacceptably high standard deviation, sigma(r), of 1.20. In contrast, with a conventional macro-Raman system (150 mum spot diameter), combined eight grid point data gave mu(r) = 1.47 with sigma(r) = 0.16. A simple statistical model which could be used to predict sigma(r) under the various conditions used was developed. The model showed that the decrease in sigma(r) on moving to a 150 mum spot was too large to be due entirely to the increased spot diameter but was consistent with the increased sampling volume that arose from a combination of the larger spot size and depth of focus in the macroscopic system. With the macro-Raman system, combining 64 grid points (0.5 mm spacing and 1-2 s accumulation per point) to give a single averaged spectrum for a tablet was found to be a practical balance between minimizing sampling errors and keeping overhead times at an acceptable level. The effectiveness of this sampling strategy was also tested by quantitative analysis of a set of model ecstasy tablets prepared from MDEA-sorbitol (0-30% by mass MDEA). A simple univariate calibration model of averaged 64 point data had R-2 = 0.998 and an r.m.s. standard error of prediction of 1.1% whereas data obtained by sampling just four points on the same tablet showed deviations from the calibration of up to 5%.

Quantitative DRIFTS investigation of possible reaction mechanisms for the water-gas shift reaction on high-activity Pt- and Au-based catalysts

The present work emphasizes the importance of including a full quantitative analysis when in situ operando methods are used to investigate reaction mechanisms and reaction intermediates. The fact that some surface species exchange at a similar rate to the reaction product during isotopic transients is a necessary but not sufficient criterion for participation as a key reaction intermediate. This is exemplified here in the case of highly active low-temperature water-gas shift (WGS) catalysts based on gold and platinum. Operando DRIFTS data, isotopic exchanges, and DRIFTS calibration curves relating the concentration of formate species to the corresponding DRIFTS band intensity were combined to obtain a quantitative measure of the specific rate of formate decomposition. Despite displaying a rapid isotopic exchange rate (sometimes as fast as that of the reaction product CO2), the concentration of formates seen by DRIFTS was found to account for at most only 10% of the CO2 produced under the experimental conditions reported herein. These new results obtained on Au/CeZrO4 and Pt/CeO2 preparations (which are among the most active low-temperature WGS catalysts reported to date), led to the same conclusions regarding the minor role of IR-observable formates as those obtained in the case of less active Au/Ce(La)O-2 and Pt/ZrO2 catalysts. (c) 2007 Elsevier Inc. All rights reserved.

Production of a monoclonal antibody and its application in an optical biosensor based assay for the quantitative measurement of Pantothenic Acid (Vitamin B5) in foodstuffs

Pantothenicacid (PA), vitamin B5, is an essential B vitamin that may be fortified in food and as such requires robust and accurate methods of detection to meet compliance legislation. This study reports the production and characterisation of the first monoclonalantibody (MAb) specific for PA and the subsequent development of a surface plasmon resonance (SPR) biosensorassay for the quantification of PA. The developed assay was compared with an SPR based commercial kit which utilised a polyclonal antibody (PAb). Foodstuffs, including cereals (n = 43), infant formulas and baby food (n = 10) and fruit juices (n = 48) were analysed by both the MAb and PAb biosensorassays and comparison plots showed good correlation (R2 0.77–0.99). The results indicate that the MAb basedbiosensorassay is suitable for the measurement of PA in foodstuffs and has the added advantage of facilitating a constant, long term supply of identical antibody. Preliminary matrix studies suggest the MAb basedassay is an excellent candidate for further validation studies and routine quality assurance based analysis.

Electrical methods of controlling bacterial adhesion and biofilm on device surfaces.

This review will summarize the significant body of research within the field of electrical methods of controlling the growth of microorganisms. We examine the progress from early work using current to kill bacteria in static fluids to more realistic treatment scenarios such as flow-through systems designed to imitate the human urinary tract. Additionally, the electrical enhancement of biocide and antibiotic efficacy will be examined alongside recent innovations including the biological applications of acoustic energy systems to prevent bacterial surface adherence. Particular attention will be paid to the electrical engineering aspects of previous work, such as electrode composition, quantitative electrical parameters and the conductive medium used. Scrutiny of published systems from an electrical engineering perspective will help to facilitate improved understanding of the methods, devices and mechanisms that have been effective in controlling bacteria, as well as providing insights and strategies to improve the performance of such systems and develop the next generation of antimicrobial bioelectric materials.

Quantitative evaluation of fundus autofluorescence imaged 'in vivo' in eyes with retinal disease

Aim - To describe a new method of evaluating the topographic distribution of fundus autofluorescence in eyes with retinal disease. Methods - Images of fundus autofluorescence were obtained in five patients and 34 normal volunteers using a confocal scanning laser ophthalmoscope (cSLO). To evaluate the topographic distribution of fundus autofluorescence throughout the posterior pole a rectangular box, 10 x 750 pixels, was used as the area of analysis. The box was placed, horizontally, across the macular region. The intensity of fundus autofluorescence of each pixel within the rectangular box was plotted against its degree of eccentricity. Profiles of fundus autofluorescence from patients were compared with those obtained from the age matched control group and with cSLO images. Results - Profiles of fundus autofluorescence appeared to represent the topographic distribution of fundus autofluorescence throughout the posterior pole appreciated in the cSLO images, and allowed rapid identification and quantification of areas of increased or decreased fundus autofluorescence. Conclusions - Fundus autofluorescence profiles appear to be useful to study the spatial distribution of fundus autofluorescence in eyes with retinal disease.

Decompressive hemicraniectomy following malignant middle cerebral artery infarctions:a mixed methods exploration of carer experience and level of burden

Purpose: This study explores the experiences and sense of burden of family carers of survivors of malignant middle cerebral artery infarctions who had undergone decompressive hemicraniectomy. To date, there have been no studies examining carer outcomes among this unique population. This study, taken alongside an already published study of survivor outcomes, provides a more holistic picture with regard to sequelae within the sample. Method: Six family carers completed the Sense of Competence Questionnaire and the Hospital Anxiety and Depression Scale. These results were compared with existing normative data. Carers also consented to a semi-structured interview. Interview data were examined using thematic content analysis. Consistent with the mixed methods design, quantitative and qualitative findings were integrated for further analysis. Results: While carers experienced many losses, their overall sense of burden was not outside 'Average' limits, nor did they experience clinically significant symptoms of depression. All carers identified methods of coping with the demands of caregiving. These included intrapersonal, interpersonal and practical strategies. All carers apart from one were able to identify areas of post-traumatic growth. Conclusion: Carers will benefit from information, support and care. In addition, problem solving skills are essential in managing the myriad difficulties that arise in the aftermath of stroke. [Box: see text].

Quantitative estimation of retinal nerve fiber layer height in glaucoma and the relationship with optic nerve head topography and visual field

Purpose: The authors estimated the retinal nerve fiber layer height (RNFLH) measurements in patients with glaucoma compared with those in age-matched healthy subjects as obtained by the laser scanning tomography and assessed the relationship between RNFLH measurements and optic and visual field status. Methods: Parameters of optic nerve head topography and RNFLH were evaluated in 125 eyes of 21 healthy subjects and 104 patients with glaucoma using the Heidelberg Retina Tomograph ([HRT] Heidelberg Engineering GmbH, Heidelberg, Germany) for the entire disc area and for the superior 70°(50°temporal and 20°nasal to the vertical midline) and inferior 70°sectors of the optic disc. The mean deviation of the visual field, as determined by the Humphrey program 24-2 (Humphrey Instruments, Inc., San Leonardo, CA, U.S.A) was calculated in the entire field and in the superior and inferior Bjerrum area. Result: Retinal nerve fiber layer height parameters (mean RNFLH and RNFL cross-sectional area) were decreased significantly in patients with glaucoma compared with healthy individuals. Retinal nerve fiber layer height parameters was correlated strongly with rim volume, rim area, and cup/disc area ratio. Of the various topography measures, retinal nerve fiber layer (RNFL) parameters and cup/disc area ratio showed the strongest correlation with visual field mean deviation in patients with glaucoma. Conclusion: Retinal nerve fiber layer height measures were reduced substantially in patients with glaucoma compared with age-matched healthy subjects. Retinal nerve fiber layer height was correlated strongly with topographic optic disc parameters and visual field changes in patients with glaucoma.

Methods to objectify reversibility of glaucomatous cupping

Lowering intraocular pressure in adults with glaucoma may be associated with an improvement in appearance of the optic nerve head. The stage of disease, the amount of intraocular pressure reduction, and the age of the patient probably influence the occurrence of this event. The clinical relevance of 'reversal' has not been established with certainty. The reversibility of glaucomatous cupping can be detected by subjective and qualitative means (examination of the patient or of fundus photographs) or by quantitative techniques such as photogrammetry, computerized image analysis, and scanning laser tomography. Clinical and experimental studies are providing new information about the behavior of the optic nerve head tissues in response to changes in intraocular pressure.

A Longitudinal Study of Stargardt Disease: Quantitative Assessment of Fundus Autofluorescence, Progression and Genotype Correlations

PURPOSE To characterise subtypes of fundus autofluorescence (AF), the progression of retinal atrophy and correlate these findings with genotype in Stargardt Disease. METHODS Full clinical examination and AF imaging was undertaken in 68 patients with Stargardt Disease. The baseline data were compared with those at follow-up. Patients were classified into three AF subtypes: type 1 had a localised low signal at the fovea surrounded by a homogeneous background; type 2 had a localised low signal at the macula surrounded by a heterogeneous background with numerous foci of abnormal signal; type 3 had multiple low signal areas at the posterior pole with a heterogeneous background. At baseline, there were 19 patients with type 1, 41 with type 2, and 8 with type 3. The areas of reduced AF signal were measured and rate of atrophy enlargement (RAE) was calculated as the difference of the atrophy size over time (mm2) divided by the follow-up interval (yrs). Molecular screening of ABCA4 was undertaken. RESULTS The mean follow-up interval was 9.1 years. 42% of type 1 progressed to type 2, and 12% of type 2 progressed to type 3. RAE (mm2/yr) based upon baseline AF subtypes was significantly different; 0.06 in type 1, 0.67 in type 2, and 4.37 in type 3. ABCA4 variants were identified in 57 patients. There was a significant association between AF subtype and genotype. CONCLUSIONS The AF pattern at baseline influences the enlargement of atrophy over time and has genetic correlates. These data are likely to assist in the provision of counselling on prognosis in Stargardt Disease and be valuable for future clinical trials.

Using mixed-methods to examine teachers’ attitudes to educational change:The case of the Skills for Life strategy for improving adult literacy and numeracy skills in England.

This paper reports on a longitudinal study that examines how a national reform introduced in England in the field of adult literacy, language, and numeracy is affecting teachers. The paper focuses on the use of a mixed methodology to explore teachers' attitudes to the reform and how these change over time. The quantitative strand includes the construction and use of a Likert-type instrument for measuring the attitudes of a panel of 1,500 teachers. The qualitative strand builds on the quantitative results and includes focus groups and in-depth interviews with a subsample of teachers in the panel. As the study is still in its initial phase, the purpose is not to present findings, but to discuss how quantitative and qualitative evidence can be combined in evaluation research.