Entanglement distribution with global control in a star-shaped multi-splitter

Distributed quantum information processing (QIP) is a promising way to bypass problems due to unwanted interactions between elements. However, this strategy presupposes the engineering of protocols for remote processors. In many of them, pairwise entanglement is a key resource. We study a model which distributes entanglement among elements of a delocalized network without local control. The model is efficient both in finite- and infinite-dimensional Hilbert spaces. We suggest a setup of electromechanical systems to implement our proposal.

What motion distributions yield global transparency and spatial segmentation?

We have examined the ability of observers to parse bimodal local-motion distributions into two global motion surfaces, either overlapping (yielding transparent motion) or spatially segregated (yielding a motion boundary). The stimuli were random dot kinematograms in which the direction of motion of each dot was drawn from one of two rectangular probability distributions. A wide range of direction distribution widths and separations was tested. The ability to discriminate the direction of motion of one of the two motion surfaces from the direction of a comparison stimulus was used as an objective test of the perception of two discrete surfaces. Performance for both transparent and spatially segregated motion was remarkably good, being only slightly inferior to that achieved with a single global motion surface. Performance was consistently better for segregated motion than for transparency. Whereas transparent motion was only perceived with direction distributions which were separated by a significant gap, segregated motion could be seen with abutting or even partially overlapping direction distributions. For transparency, the critical gap increased with the range of directions in the distribution. This result does not support models in which transparency depends on detection of a minimum size of gap defining a bimodal direction distribution. We suggest, instead, that the operations which detect bimodality are scaled (in the direction domain) with the overall range of distributions. This yields a flexible, adaptive system that determines whether a gap in the direction distribution serves as a segmentation cue or is smoothed as part of a unitary computation of global motion.

Direction repulsion goes global

When viewing two superimposed, translating sets of dots moving in different directions, one overestimates the direction difference. This phenomenon of direction repulsion is thought to be driven by inhibitory interactions between directionally tuned motion detectors [1, 2]. However, there is disagreement on where this occurs — at early stages of motion processing [1, 3], or at the later, global motion-processing stage following “pooling” of these measures [4–6]. These two stages of motion pro - cessing have been identified as occurring in area V1 and the human homolog of macaque MT/V5, respectively[7, 8]. We designed experiments in which local and global predictions of repulsion are pitted against one another. Our stimuli contained a target set of dots, moving at a uniform speed, superimposed on a “mixed-speed” distractor set. Because the perceived speed of a mixed-speed stimulus is equal to the dots’ average speed [9], a global-processing account of direction repulsion predicts that repulsion magnitude induced by a mixed-speed distractor will be indistinguishable from that induced by a single-speed distractor moving at the same mean speed. This is exactly what we found. These results provide compelling evidence that global-motion interactions play a major role in driving direction repulsion.

The direction aftereffect is driven by adaptation of local motion detectors

The processing of motion information by the visual system can be decomposed into two general stages; point-by-point local motion extraction, followed by global motion extraction through the pooling of the local motion signals. The direction aftereVect (DAE) is a well known phenomenon in which prior adaptation to a unidirectional moving pattern results in an exaggerated perceived direction diVerence between the adapted direction and a subsequently viewed stimulus moving in a diVerent direction. The experiments in this paper sought to identify where the adaptation underlying the DAE occurs within the motion processing hierarchy. We found that the DAE exhibits interocular transfer, thus demonstrating that the underlying adapted neural mechanisms are binocularly driven and must, therefore, reside in the visual cortex. The remaining experiments measured the speed tuning of the DAE, and used the derived function to test a number of local and global models of the phenomenon. Our data provide compelling evidence that the DAE is driven by the adaptation of motion-sensitive neurons at the local-processing stage of motion encoding. This is in contrast to earlier research showing that direction repulsion, which can be viewed as a simultaneous presentation counterpart to the DAE, is a global motion process. This leads us to conclude that the DAE and direction repulsion reflect interactions between motion-sensitive neural mechanisms at different levels of the motion-processing hierarchy.

On velocity-based local model networks for nonlinear identification

This paper exposes the strengths and weaknesses of the recently proposed velocity-based local model (LM) network. The global dynamics of the velocity-based blended representation are directly related to the dynamics of the underlying local models, an important property in the design of local controller networks. Furthermore, the sub-models are continuous-time and linear providing continuity with established linear theory and methods. This is not true for the conventional LM framework, where the global dynamics are only weakly related to the affine sub-models. In this paper, a velocity-based multiple model network is identified for a highly nonlinear dynamical system. The results show excellent dynamical modelling performances, highlighting the value of the velocity-based approach for the design and analysis of LM based control. Three important practical issues are also addressed. These relate to the blending of the velocity-based local models, the use of normalised Gaussian basis functions and the requirement of an input derivative.

Comparison of two construction algorithms for local model networks

The divide-and-conquer approach of local model (LM) networks is a common engineering approach to the identification of a complex nonlinear dynamical system. The global representation is obtained from the weighted sum of locally valid, simpler sub-models defined over small regions of the operating space. Constructing such networks requires the determination of appropriate partitioning and the parameters of the LMs. This paper focuses on the structural aspect of LM networks. It compares the computational requirements and performances of the Johansen and Foss (J&F) and LOLIMOT tree-construction algorithms. Several useful and important modifications to each algorithm are proposed. The modelling performances are evaluated using real data from a pilot plant of a pH neutralization process. Results show that while J&F achieves a more accurate nonlinear representation of the pH process, LOLIMOT requires significantly less computational effort.

Local network-based measures to assess the inferability of different regulatory networks

The purpose of this study is to compare the inferability of various synthetic as well as real biological regulatory networks. In order to assess differences we apply local network-based measures. That means, instead of applying global measures, we investigate and assess an inference algorithm locally, on the level of individual edges and subnetworks. We demonstrate the behaviour of our local network-based measures with respect to different regulatory networks by conducting large-scale simulations. As inference algorithm we use exemplarily ARACNE. The results from our exploratory analysis allow us not only to gain new insights into the strength and weakness of an inference algorithm with respect to characteristics of different regulatory networks, but also to obtain information that could be used to design novel problem-specific statistical estimators.

WTO government procurement rules and the local dynamics of procurement policies: A malaysian case study

This article examines efforts to create binding international rules regulating public procurement and considers, in particular, the failure to reach a WTO agreement oil transparency in government procurement. The particular focus of the discussion is the approach taken by Malaysia to these international procurement rules and to the negotiation of an agreement on transparency. Rules governing public procurement directly implicate fundamental arrangements of authority amongst and between different parts of government, its citizens and non-citizens. At the same time, the rules touch upon areas that are particularly sensitive for some developing countries. Many governments use preferences in public procurement to accomplish important redistributive and developmental goals. Malaysia has long used significant preferences in public procurement to further sensitive developmental policies targeted at improving the economic strength of native Malays. Malaysia also has political and legal arrangements substantially at odds with fundamental elements of proposed global public procurement rules. Malaysia has, therefore, been forceful in resisting being bound by international public procurement rules, and has played all important role in defeating the proposed agreement oil transparency. We suggest that our case study has implications beyond procurement. The development of international public procurement rules appears to be guided by many of the same values that guide the broader effort to create a global administrative law. This case study, therefore, has implications for the broader exploration of these efforts to develop a global administrative law, in particular the relationship between such efforts and the interests of developing countries.

Education for global citizenship in a divided society? Young people's views and experiences

Global citizenship education has been suggested as a means of overcoming the limitations of national citizenship in an increasingly globalised world. In divided societies, global citizenship education is especially relevant and problematic as it offers the opportunity to explore identities and conflict in a wider context. This paper therefore explores young people's understandings of global citizenship in Northern Ireland, a divided society emerging from conflict. Results from focus groups with primary and post-primary pupils reflect some theoretical conceptualisations of global citizenship, including an awareness of global issues, understandings of environmental interdependence and global responsibility, though other elements appear to be less well understood. We argue that global citizenship education will fail to overcome engrained cultural divisions locally and may perpetuate cultural stereotypes globally, unless local and global controversial issues are acknowledged and issues of identity and interdependence critically examined at both levels.

How Porosity and Permeability Vary Spatially With Grain Size, Sorting, Cement Volume, and Mineral Dissolution In Fluvial Triassic Sandstones: The Value of Geostatistics and Local Regression

Although it is well known that sandstone porosity and permeability are controlled by a range of parameters such as grain size and sorting, amount, type, and location of diagenetic cements, extent and type of compaction, and the generation of intergranular and intragranular secondary porosity, it is less constrained how these controlling parameters link up in rock volumes (within and between beds) and how they spatially interact to determine porosity and permeability. To address these unknowns, this study examined Triassic fluvial sandstone outcrops from the UK using field logging, probe permeametry of 200 points, and sampling at 100 points on a gridded rock surface. These field observations were supplemented by laser particle-size analysis, thin-section point-count analysis of primary and diagenetic mineralogy, quantitiative XRD mineral analysis, and SEM/EDAX analysis of all 100 samples. These data were analyzed using global regression, variography, kriging, conditional simulation, and geographically weighted regression to examine the spatial relationships between porosity and permeability and their potential controls. The results of bivariate analysis (global regression) of the entire outcrop dataset indicate only a weak correlation between both permeability porosity and their diagenetic and depositional controls and provide very limited information on the role of primary textural structures such as grain size and sorting. Subdividing the dataset further by bedding unit revealed details of more local controls on porosity and permeability. An alternative geostatistical approach combined with a local modelling technique (geographically weighted regression; GWR) subsequently was used to examine the spatial variability of porosity and permeability and their controls. The use of GWR does not require prior knowledge of divisions between bedding units, but the results from GWR broadly concur with results of regression analysis by bedding unit and provide much greater clarity of how porosity and permeability and their controls vary laterally and vertically. The close relationship between depositional lithofacies in each bed, diagenesis, and permeability, porosity demonstrates that each influences the other, and in turn how understanding of reservoir properties is enhanced by integration of paleoenvironmental reconstruction, stratigraphy, mineralogy, and geostatistics.

How does global change affect the strength of trophic interactions?

Recent research has generally shown that a small change in the number of species in a food web can have consequences both for community structure and ecosystem processes. However 'change' is not limited to just the number of species in a community, but might include an alteration to such properties as precipitation, nutrient cycling and temperature, all of which are correlated with productivity. Here we argue that predicted scenarios of global change will result in increased plant productivity. We model three scenarios of change using simple Lotka-Volterra dynamics, which explore how a global change in productivity might affect the strength of local species interactions and detail the consequences for community and ecosystem level stability. Our results indicate that (i) at local scales the average population size of consumers may decline because of poor quality food resources, (ii) that the strength of species interactions at equilibrium may become weaker because of reduced population size, and (iii) that species populations may become more variable and may take longer to recover from environmental or anthropogenic disturbances. At local scales interaction strengths encompass such properties as feeding rates and assimilation efficiencies, and encapsulate functionatty important information with regard to ecosystem processes. Interaction strengths represent the pathways and transfer of energy through an ecosystem. We examine how such local patterns might be affected given various scenarios of 'global change' and discuss the consequences for community stability and ecosystem functioning. (C) 2004 Elsevier GmbH. All rights reserved.