A comparison of Agiolax and lactulose in elderly patients with chronic constipation

In a double-blind crossover study the efficacies of Agiolax, a combination of fibre and senna pod, and lactulose were compared in 77 long-stay elderly patients with chronic constipation. Mean daily bowel frequency, stool consistency and ease of evacuation were significantly greater with Agiolax than lactulose. The recommended dose was exceeded more frequently with lactulose than Agiolax (chi 2 = 8.38, p <0.01). Adverse effects were not different for the 2 treatments. In long-stay elderly patients with chronic constipation Agiolax and lactulose were well tolerated, but Agiolax proved a more effective treatment.

Anisotropy of single crystal 3C-SiC during nanometric cutting

3C–SiC (the only polytype of SiC that resides in a diamond cubic lattice structure) is a relatively new material that exhibits most of the desirable engineering properties required for advanced electronic applications. The anisotropy exhibited by 3C–SiC during its nanometric cutting is significant, and the potential for its exploitation has yet to be fully investigated. This paper aims to understand the influence of crystal anisotropy of 3C–SiC on its cutting behaviour. A molecular dynamics simulation model was developed to simulate the nanometric cutting of single-crystal 3C–SiC in nine (9) distinct combinations of crystal orientations and cutting directions, i.e. (1?1?1) <-1?1?0>, (1?1?1) <-2?1?1>, (1?1?0) <-1?1?0>, (1?1?0) <0?0?1>, (1?1?0) <1?1?-2>, (0?0?1) <-1?1?0>, (0?0?1) <1?0?0>, (1?1?-2) <1?-1?0> and (1?-2?0) <2?1?0>.

In order to ensure the reliability of the simulation results, two separate simulation trials were carried out with different machining parameters. In the first trial, a cutting tool rake angle of -25°, d/r (uncut chip thickness/cutting edge radius) ratio of 0.57 and cutting velocity of 10 m s-1 were used whereas a second trial was done using a cutting tool rake angle of -30°, d/r ratio of 1 and cutting velocity of 4 m s-1. Both the trials showed similar anisotropic variation.

The simulated orthogonal components of thrust force in 3C–SiC showed a variation of up to 45%, while the resultant cutting forces showed a variation of 37%. This suggests that 3C–SiC is highly anisotropic in its ease of deformation. These results corroborate with the experimentally observed anisotropic variation of 43.6% in Young's modulus of 3C–SiC. The recently developed dislocation extraction algorithm (DXA) [1, 2] was employed to detect the nucleation of dislocations in the MD simulations of varying cutting orientations and cutting directions. Based on the overall analysis, it was found that 3C–SiC offers ease of deformation on either (1?1?1) <-1?1?0>, (1?1?0) <0?0?1>, or (1?0?0) <1?0?0> setups.

Rational screening low-cost counter electrodes for dye-sensitized solar cells

Dye-sensitized solar cells have attracted intense research attention owing to their ease of fabrication, cost-effectiveness and high efficiency in converting solar energy. Noble platinum is generally used as catalytic counter electrode for redox mediators in electrolyte solution. Unfortunately, platinum is expensive and non-sustainable for long-term applications. Therefore, researchers are facing with the challenge of developing low-cost and earth-abundant alternatives. So far, rational screening of non-platinum counter electrodes has been hamstrung by the lack of understanding about the electrocatalytic process of redox mediators on various counter electrodes. Here, using first-principle quantum chemical calculations, we studied the electrocatalytic process of redox mediators and predicted electrocatalytic activity of potential semiconductor counter electrodes. On the basis of theoretical predictions, we successfully used rust (alpha-Fe2O3) as a new counter electrode catalyst, which demonstrates promising electrocatalytic activity towards triiodide reduction at a rate comparable to platinum.

Fructose Chemistry

Fructose is a six-carbon ketose monosaccharide. In aqueous solution and in the crystalline form, the majority of the molecules form ring structures. Of these, the six-membered pyranose form is the most abundant; however, about one-quarter of the molecules are in the five-membered, furanose form. While many of its reactions are similar to those of glucose, the presence of a ketone group in the chain, and the relative ease with which the molecule forms a five-membered furanose ring affects its chemistry and biochemistry. Specific pathways are required to enable organisms to exploit fructose in energy metabolism; these require the enzyme fructokinase and involve the conversion of fructose to glycolytic intermediates. Similarly, specific pathways for the biosynthesis of fructose and fructose-containing polymers, such as inulin, are required. Non-enzymatic glycation (fructation) by fructose has not been as extensively studied as the corresponding reactions with glucose. Nevertheless, especially in diabetic patients and fructose-rich foodstuffs, this reaction is likely to be important.

Evaluation of a Final Year Work-shadowing Attachment

The transition from medical student to junior doctor is well recognised to be a difficult and stressful period. To ease this transition, most UK universities have a work-shadowing period (WSP), during which students can learn practical skills needed for forthcoming employment. The aim of this study was to evaluate the WSP at Queen's University Belfast, and gain the views of both students and Foundation Programme Supervisors and Directors (FPSDs). The study utilised both qualitative (focus groups) and quantitative (questionnaires) approaches. The FPSDs completed a specific questionnaire designed for this study, while the students completed the university's internal quality assurance questionnaire. Twenty-eight of the 37 (76%) FPSDs and 106 / 196 (54%) students completed the questionnaires. Focus groups were conducted with up to 10 students in each group in both a regional centre and a district general hospital at the start and the end of the WSP as well as 8 weeks into working life. The transcripts of the focus groups were analysed and themes identified. A number of deficiencies with the current WSP were identified, including concerns about the use of log books, the timing of the attachment and relatively low levels of supervision provided by senior hospital staff members. As a result, students felt unprepared for commencing work, with particular mention given to medical emergencies, prescribing, and the emotional aspects of the job. A number of recommendations are made, including the need for more senior input to ensure better student attendance, participation and clinical interaction. Furthermore, students should be offered additional supervised responsibility for delivery of patient care and more experiential learning with respect to drug prescribing and administration. The study also suggests that more needs to be done to help ease the emotional and psychological stresses of the early FY1 period. These issues have been resolved to a large extent with the introduction of the new final year Student Assistantship module in the academic year 2010-2011. © The Ulster Medical Society, 2012.

In search of common grounds: Stitching the divided landscape of urban parks in Belfast's interface zones

Political and spatial contestation in divided cities contributes to strategies of self-defense that utilize physical and spatial settings to enable the constitution of social boundaries, borders and territories.
Urban parks that are designed to ease division through an open transitional landscape can instead facilitate further segregation through their spatial order and facility layout. This paper investigates the role of the spatial design and material landscape of integrated parks in Belfast interface areas as instruments of engagement or division. It does so by analyzing the spatial organization of the parks’ facilities and the resultant ‘social voids.’ Space, time and distance were found to be effective tools for the negotiation of privacy, the manifestation of power, and the interplay of dominance and self-confidence. In the context of a divided city, strong community-culture tends to reproduce new boundaries and territories within the shared landscape. Through user interviews and spatial analysis, this paper outlines the design principles that influence spatial behavior in the urban parks of contested urban landscapes. It argues that despite granting equal access to shared public facilities, social voids and physical gaps can instill practices of division that deepen territorial barriers, both psychologically and spatially.

A cleavable network based on crosslinked star polymers containing acid-labile diacetal crosslinks: Synthesis, characterization and hydrolysis

A hydrolyzable model network comprising interconnected star polymers was prepared by the sequential group transfer polymerization of methyl methacrylate and the acid-labile diacetal-based dimethacrylate crosslinker bis[(2-methacryloyloxy)ethoxymethyl] ether. in contrast to other polymer networks previously synthesized by our group, all the branching points of this polymer network were found to hydrolyze under mildly acidic conditions, giving a linear copolymer with the theoretically expected molecular weight and composition. The ease of hydrolysis of this polymer network renders it a good candidate for use in the biomedical field. The characterization of the synthesized network, its linear and star polymer precursors and the hydrolysis products of the network and its precursors, by a variety of techniques, established the successful synthesis and hydrolysis of this well-defined polymer nanostructure.

The sustainability and assessment of drystone retaining walls

The art of drystone walling is a highly sustainable traditional practice which uses local materials and craftsmen. As no
mortar is used they have low embodied carbon, and much repair work or rebuilding can be carried out using very little if any new
materials. However local practices developed to suit local materials, leading to a range of construction styles, making them difficult to
assess. This paper examines a range of construction styles of drystone retaining walls in use across the United Kingdom.
Understanding of the substantial variations of construction style is essential to enable proper assessment of these structures. Different
frictional and weathering characteristics, and the naturally occurring shapes of stone found in an area, all affect the ways in which the
stones have traditionally been assembled into walls. Ease of construction also plays a part, as the craftsman will naturally wish to
achieve a robust construction in a way that is economical of time and effort. Aesthetics may be very important, for both client and
craftsman. It is also shown that construction style is influenced by the location and function of the structures, with harbour walls
particularly likely to have unique characteristics, and the reasons for this are explored.

Rigorous Specification and Low-Latency Implementation of Technical Market Indicators

Technical market indicators are tools used by technical an- alysts to understand trends in trading markets. Technical (market) indicators are often calculated in real-time, as trading progresses. This paper presents a mathematically- founded framework for calculating technical indicators. Our framework consists of a domain specific language for the un- ambiguous specification of technical indicators, and a run- time system based on Click, for computing the indicators. We argue that our solution enhances the ease of program- ming due to aligning our domain-specific language to the mathematical description of technical indicators, and that it enables executing programs in kernel space for decreased latency, without exposing the system to users’ programming errors.

Evaluation of the contribution of theatre attendance to medical undergraduate neuroscience teaching - a pilot study.

Introduction: Medical students often attend the neurosurgical theatre during their clinical neurosciences attachment. However, few studies have been performed to objectively assess the value of this theatre-based learning experience. The main aim of this study was to explore student perceptions on the contribution of neurosurgical theatre attendance to clinical neuroscience teaching.

Materials and Methods: Third-year medical students undergoing their 2-week clinical neurosciences rotation at the Royal Hospitals Belfast were invited to participate in this study. A multi-method strategy was employed using a survey questionnaire comprising of closed and open-ended questions followed by semi-structured interviews to gain a greater 'in-depth' analysis of the potential contribution of neurosurgical theatre attendance to neuroscience teaching.

Results: Based on the completed survey responses of 22 students, the overall experience of neurosurgical theatre-based learning was a positive one. 'In-depth' analysis from semi-structured interviews indicated that students felt that some aspects of their neurosurgical theatre attendance could be improved. Better preparation such as reading up on the case in hand and an introduction to simple theatre etiquette to put the student at ease (in particular, for students who had never attended theatre previously), would improve the learning experience. In addition, having an expectation of what students are expected to learn in theatre making it more learning outcomes-based would probably make it feel a more positive experience by the student.

Conclusions: The vast majority of students acknowledged the positive learning outcomes of neurosurgical theatre attendance and felt that it should be made a mandatory component of the curriculum.

Ionothermal, microwave-assisted synthesis of indium(III) selenide

Microcrystalline indium(III) selenide was prepared from a diphenyl diselenide precursor and a range of chloroindate(III) ionic liquids via a microwave-assisted ionothermal route; this is the first report on the use of either microwave irradiation or ionic liquids to prepare this material. The influence of the reaction temperature, dilution with a spectator ionic liquid and variation of the cation and the anion of the ionic liquid on the product morphology and composition were investigated. This resulted in a time-efficient and facile one-pot reaction to produce microcrystalline indium(III) selenide. The product formation in the ionic liquids has been monitored using Raman spectroscopy. The products have been characterised using PXRD, SEM and EDX. Advantages of this new route, such as the ease of solubilisation of all reactants into one phase at high concentration, the negligible vapour pressure irrespective of the reaction temperature, very fast reaction times, ease of potential scale-up and reproducibility are discussed.

Public knowledge and perceptions of connected health

Rationale, aims and objectives: This study aims to examine the public's knowledge and perceptions of connected health (CH).

Methods: A structured questionnaire was administered by face-to-face interview to an opportunistic sample of 1003 members of the public in 11 shopping centres across Northern Ireland (NI). Topics included public knowledge of CH, opinions about who should provide CH and views about the use of computers in health care. Multivariable analyses were conducted to assess respondents' willingness to use CH in the future.

Results: Sixty-seven per cent of respondents were female, 31% were less than 30 years old and 22% were over 60 years. Most respondents had never heard of CH (92%). Following a standard definition, the majority felt CH was a good idea (≈90%) and that general practitioners were in the best position to provide CH; however, respondents were equivocal about reductions in health care professionals' workload and had some concerns about the ease of device use. Factors positively influencing willingness to use CH in the future included knowledge of someone who has a chronic disease, residence in NI since birth and less concern about the use of information technology (IT) in health care. Those over 60 years old or who felt threatened by the use of IT to store personal health information were less willing to use CH in the future.

Conclusion: Increased public awareness and education about CH is required to alleviate concerns and increase the acceptability of this type of care.

A review of topographic controls on moraine distribution

Ice-marginal moraines are often used to reconstruct the dimensions of former ice masses, which are then used as proxies for palaeoclimate. This approach relies on the assumption that the distribution of moraines in the modern landscape is an accurate reflection of former ice margin positions during climatically controlled periods of ice margin stability. However, the validity of this assumption is open to question, as a number of additional, nonclimatic factors are known to influence moraine distribution. This review considers the role played by topography in this process, with specific focus on moraine formation, preservation, and ease of identification (topoclimatic controls are not considered). Published literature indicates that the importance of topography in regulating moraine distribution varies spatially, temporally, and as a function of the ice mass type responsible for moraine deposition. In particular, in the case of ice sheets and ice caps ( > 1000 km2), one potentially important topographic control on where in a landscape moraines are deposited is erosional feedback, whereby subglacial erosion causes ice masses to become less extensive over successive glacial cycles. For the marine-terminating outlets of such ice masses, fjord geometry also exerts a strong control on where moraines are deposited, promoting their deposition in proximity to valley narrowings, bends, bifurcations, where basins are shallow, and/or in the vicinity of topographic bumps. Moraines formed at the margins of ice sheets and ice caps are likely to be large and readily identifiable in the modern landscape. In the case of icefields and valley glaciers (10–1000 km2), erosional feedback may well play some role in regulating where moraines are deposited, but other factors, including variations in accumulation area topography and the propensity for moraines to form at topographic pinning points, are also likely to be important. This is particularly relevant where land-terminating glaciers extend into piedmont zones (unconfined plains, adjacent to mountain ranges) where large and readily identifiable moraines can be deposited. In the case of cirque glaciers (< 10 km2), erosional feedback is less important, but factors such as topographic controls on the accumulation of redistributed snow and ice and the availability of surface debris, regulate glacier dimensions and thereby determine where moraines are deposited. In such cases, moraines are likely to be small and particularly susceptible to post-depositional modification, sometimes making them difficult to identify in the modern landscape. Based on this review, we suggest that, despite often being difficult to identify, quantify, and mitigate, topographic controls on moraine distribution should be explicitly considered when reconstructing the dimensions of palaeoglaciers and that moraines should be judiciously chosen before being used as indirect proxies for palaeoclimate (i.e., palaeoclimatic inferences should only be drawn from moraines when topographic controls on moraine distribution are considered insignificant).

Covariance Averaging for Improved Estimation and Portfolio Allocation

We propose a new method for estimating the covariance matrix of a multivariate time series of nancial returns. The method is based on estimating sample covariances from overlapping windows of observations which are then appropriately weighted to obtain the nal covariance estimate. We extend the idea of (model) covariance averaging o ered in the covariance shrinkage approach by means of greater ease of use, exibility and robustness in averaging information over different data segments. The suggested approach does not su er from the curse of dimensionality and can be used without problems of either approximation or any demand for numerical optimization.

Photosensitisers - the progression from photodynamic therapy to anti-infective surfaces

Introduction: The application of light as a stimulus in pharmaceutical systems and the associated ability to provide precise spatiotemporal control over location, wavelength and intensity, allowing ease of external control independent of environmental conditionals, has led to its increased use. Of particular note is the use of light with photosensitisers.

Areas covered: Photosensitisers are widely used in photodynamic therapy to cause a cidal effect towards cells on irradiation due to the generation of reactive oxygen species. These cidal effects have also been used to treat infectious diseases. The effects and benefits of photosensitisers in the treatment of such conditions are still being developed and further realised, with the design of novel delivery strategies. This review provides an overview of the realisation of the pharmaceutically relevant uses of photosensitisers, both in the context of current research and in terms of current clinical application, and looks to the future direction of research.

Expert opinion: Substantial advances have been and are being made in the use of photosensitisers. Of particular note are their antimicrobial applications, due to absence of resistance that is so frequently associated with conventional treatments. Their potency of action and the ability to immobilise to polymeric supports is opening a wide range of possibilities with great potential for use in healthcare infection prevention strategies.