Planning, Devolution and the Territorialisation of Wind Energy in the UK

The decarbonisation of energy systems draw a new set of stakeholders into debates over energy generation, engage a complex set of social, political, economic and environmental processes and impact at a wide range of geographical scales, including local landscape changes, national energy markets and regional infrastructure investment. This paper focusses on a particular geographic scale, that of the regions/nations of the UK (Scotland, Wales, Northern Ireland), who have been operating under devolved arrangements since the late 1990s, coinciding with the mass deployment of wind energy. The devolved administrations of the UK possess an asymmetrical set of competencies over energy policy, yet also host the majority of the UK wind resource. This context provides a useful way to consider the different ways in which geographies of "territory" are reflected in energy governance, such through techno-rational assessments of demand or infrastructure investment, but also through new spatially-defined institutions that seek to develop their own energy future, using limited regulatory competencies. By focussing on the way the devolved administrations have used their responsibilities for planning over the last decade this paper will assess the way in which the spatial politics of wind energy is giving rise to renewed forms of territorialisation of natural resources. In so doing, we aim to contribute to clarifying the questions raised by Hodson and Marvin (2013) on whether low carbon futures will reinforce or challenge dominant ways of organising relationships between the nation-state, regions, energy systems and the environment.

Distribution Network Voltage Support Using Sensitivity-based Dispatch of Distributed Generation

This paper is concerned with the voltage and reactive power issues surrounding the connection of Distributed Generation (DG) on the low-voltage (LV) distribution network. The presented system-wide voltage control algorithm consists of three stages. Firstly available reactive power reserves are utilized. Then, if required, DG active power output is curtailed. Finally, curtailment of non-critical site demand is considered. The control methodology is tested on a variant of the 13-bus IEEE Node Radial Distribution Test Feeder. The presented control algorithm demonstrated that the distribution system operator (DSO) can maintain voltage levels within a desired statutory range by dispatching reactive power from DG or network devices. The practical application of the control strategy is discussed.

Energy conserving schemes for the simulation of musical instrument contact dynamics

Collisions are an innate part of the function of many musical instruments. Due to the nonlinear nature of contact forces, special care has to be taken in the construction of numerical schemes for simulation and sound synthesis. Finite difference schemes and other time-stepping algorithms used for musical instrument modelling purposes are normally arrived at by discretising a Newtonian description of the system. However because impact forces are non-analytic functions of the phase space variables, algorithm stability can rarely be established this way. This paper presents a systematic approach to deriving energy conserving schemes for frictionless impact modelling. The proposed numerical formulations follow from discretising Hamilton׳s equations of motion, generally leading to an implicit system of nonlinear equations that can be solved with Newton׳s method. The approach is first outlined for point mass collisions and then extended to distributed settings, such as vibrating strings and beams colliding with rigid obstacles. Stability and other relevant properties of the proposed approach are discussed and further demonstrated with simulation examples. The methodology is exemplified through a case study on tanpura string vibration, with the results confirming the main findings of previous studies on the role of the bridge in sound generation with this type of string instrument.

Varieties of resource nationalism in sub-Saharan Africa’s energy and minerals markets

This article examines resource nationalism in sub-Saharan Africa's energy and minerals markets. It does so by exploring economic and political developments in three cases: Nigeria as an example of a petro-state established by means of expropriation in the wake of decolonisation; South Africa, a mature mining industry shaped by its settler colonial history; and Mozambique, a new and therefore highly-dependent entrant into the league of significant natural gas producers. Extractive industries have played a controversial role in sub-Saharan Africa due in particular to the prevalence of the resource curse. Nevertheless, energy exports will continue to play an important role in fuelling economic growth and, potentially, also development as new deposits of natural gas and oil are discovered across the region. Resource nationalism has, moreover, increasingly constrained operations of the traditionally dominant Western energy companies, in particular as competition from state-owned energy companies in sub-Saharan Africa and from emerging powers such as China is increasing.

Distributed MPC for Frequency Regulation in Multi-Terminal HVDC Grids

High Voltage Direct Current (HVDC) lines allow large quantities of power to be
transferred between two points in an electrical power system. A Multi-Terminal HVDC (MTDC) grid consists of a meshed network of HVDC lines, and this allows energy reserves to be shared between a number of AC areas in an efficient manner. Secondary Frequency Control (SFC) algorithms return the frequencies in areas connected by AC or DC lines to their original setpoints after Primary Frequency Controllers have been called following a contingency. Where multiple
TSOs are responsible for different parts of a MTDC grid it may not be possible to implement SFC from a centralised location. Thus, in this paper a simple gain based distributed Model Predictive Control strategy is proposed for Secondary Frequency Control of MTDC grids which allows TSOs to cooperatively perform SFC without the need for centralised coordination.

Energy-Aware Rate and Description Allocation Optimized Video Streaming for Mobile D2D Communications

The proliferation problem of video streaming applications and mobile devices has prompted wireless network operators to put more efforts into improving quality of experience (QoE) while saving resources that are needed for high transmission rate and large size of video streaming. To deal with this problem, we propose an energy-aware rate and description allocation optimization method for video streaming in cellular network assisted device-to-device (D2D) communications. In particular, we allocate the optimal bit rate to each layer of video segments and packetize the segments into multiple descriptions with embedded forward error correction (FEC) for realtime streaming without retransmission. Simultaneously, the optimal number of descriptions is allocated to each D2D helper for transmission. The two allocation processes are done according to the access rate of segments, channel state information (CSI) of D2D requester, and remaining energy of helpers, to gain the highest optimization performance. Simulation results demonstrate that our proposed method (named OPT) significantly enhances the performance of video streaming in terms of high QoE and energy saving.

Thermography-based virtual MPPT scheme for improving PV energy efficiency under partial shading conditions

This paper proposes a new thermography-based maximum power point tracking (MPPT) scheme to address photovoltaic (PV) partial shading faults. Solar power generation utilizes a large number of PV cells connected in series and in parallel in an array, and that are physically distributed across a large field. When a PV module is faulted or partial shading occurs, the PV system sees a nonuniform distribution of generated electrical power and thermal profile, and the generation of multiple maximum power points (MPPs). If left untreated, this reduces the overall power generation and severe faults may propagate, resulting in damage to the system. In this paper, a thermal camera is employed for fault detection and a new MPPT scheme is developed to alter the operating point to match an optimized MPP. Extensive data mining is conducted on the images from the thermal camera in order to locate global MPPs. Based on this, a virtual MPPT is set out to find the global MPP. This can reduce MPPT time and be used to calculate the MPP reference voltage. Finally, the proposed methodology is experimentally implemented and validated by tests on a 600-W PV array. 

Electron-acoustic solitons in an electron-beam plasma system with kappa-distributed electrons

Interaction of a stream of high-energy electrons with the background plasma plays an important role in the astrophysical phenomena such as interplanetary and stellar bow shock and Earth's foreshock emission. It is not yet fully understood how electrostatic solitary waves are produced at the bow shock. Interestingly, a population of energetic suprathermal electrons were also found to exist in those environments. Previously, we have studied the properties of negative electrostatic potential solitary structures exist in such a plasma with excess suprathermal electrons. In the present study, we investigate the existence conditions and propagation properties of electron-acoustic solitary waves in a plasma consisting of an electron beam fluid, a cold electron fluid, and hot suprathermal electrons modeled by a kappa-distribution function. The Sagdeev pseudopotential method was used to investigate the occurrence of stationary-profile solitary waves. We have determined how the electron-acoustic soliton characteristics depend on the electron beam parameters. It is found that the existence domain for solitons becomes narrower with an increase in the suprathermality of hot electrons, increasing the beam speed, decreasing the beam-to-cold electron population ratio. These results lead to a better understanding of the formation of electron-acoustic solitary waves observed in those space plasma systems characterized by kappa-distributed electrons and inertial drifting (beam) electrons.

Electron-acoustic solitons in an electron-beam plasma system with kappa-distributed electrons

We investigate the existence conditions and propagation properties of electron-acoustic solitary waves in a plasma consisting of an electron beam fluid, a cold electron fluid, and a hot suprathermal electron component modeled by a k-distribution function. The Sagdeev pseudopotential method was used to investigate the occurrence of stationary-profile solitary waves. We have determined how the soliton characteristics depend on the electron beam parameters. It is found that the existence domain for solitons becomes narrower with an increase in the suprathermality of hot electrons, increasing the beam speed, and decreasing the beam-to-cold electron population ratio.

Loss-of-Main Monitoring and Detection for Distributed Generations Using Dynamic Principal Component Analysis

In this paper, our previous work on Principal Component Analysis (PCA) based fault detection method is extended to the dynamic monitoring and detection of loss-of-main in power systems using wide-area synchrophasor measurements. In the previous work, a static PCA model was built and verified to be capable of detecting and extracting system faulty events; however the false alarm rate is high. To address this problem, this paper uses a well-known ‘time lag shift’ method to include dynamic behavior of the PCA model based on the synchronized measurements from Phasor Measurement Units (PMU), which is named as the Dynamic Principal Component Analysis (DPCA). Compared with the static PCA approach as well as the traditional passive mechanisms of loss-of-main detection, the proposed DPCA procedure describes how the synchrophasors are linearly
auto- and cross-correlated, based on conducting the singular value decomposition on the augmented time lagged synchrophasor matrix. Similar to the static PCA method, two statistics, namely T2 and Q with confidence limits are calculated to form intuitive charts for engineers or operators to monitor the loss-of-main situation in real time. The effectiveness of the proposed methodology is evaluated on the loss-of-main monitoring of a real system, where the historic data are recorded from PMUs installed in several locations in the UK/Ireland power system.

Power Capping: What Works, What Does Not

Peak power consumption is the first order design constraint of data centers. Though peak power consumption is rarely, if ever, observed, the entire data center facility must prepare for it, leading to inefficient usage of its resources. The most prominent way for addressing this issue is to limit the power consumption of the data center IT facility far below its theoretical peak value. Many approaches have been proposed to achieve that, based on the same small set of enforcement mechanisms, but there has been no corresponding work on systematically examining the advantages and disadvantages of each such mechanism. In the absence of such a study,it is unclear what is the optimal mechanism for a given computing environment, which can lead to unnecessarily poor performance if an inappropriate scheme is used. This paper fills this gap by comparing for the first time five widely used power capping mechanisms under the same hardware/software setting. We also explore possible alternative power capping mechanisms beyond what has been previously proposed and evaluate them under the same setup. We systematically analyze the strengths and weaknesses of each mechanism, in terms of energy efficiency, overhead, and predictable behavior. We show how these mechanisms can be combined in order to implement an optimal power capping mechanism which reduces the slow down compared to the most widely used mechanism by up to 88%. Our results provide interesting insights regarding the different trade-offs of power capping techniques, which will be useful for designing and implementing highly efficient power capping in the future.